Dyno video filmed at SNL Performance for the DFW Charity Racing Leage Dyno Day.
1998 Camaro SS M6
441 LSX 9.5 comp
Callies Dragon Slayer
TEA/TFS 235cc Heads
LMR Custom Grind
250's.. dur/620's.. lift
Shaft Mount Jessel RR's
Nasty's complete Fuel
Rated 2000 HP
Twin turbo kit by KYTP
All stainless steel
Twin TC70mm turbos (.81 A/R)
Rated 850 HP each
1700 HP Total
Stock T56 with Steel shift forks
2000 HP Mcleod Twin Disk
Built by Mcleod
18x12 rears (Mini Tub)
345/30/18 BFG DR
Full Front and Rear
All BMR and QA1
Strange 12 bolt spool
World's Fastest Camaro - 1800rwhp
Twin turboCamaro built by LMR and owner
This car made 1800rwhp and ran 244mph in a standing mile. In October it
will try for a new standing mile world record. Watch the video and see how
much of a handful this car is to drive, Josh does a great job keeping the
car from crashing.
Check out http://www.hightechcorvette.com
Follow us on Facebook http://www.facebook.com/hightech.corvette
Camaro Tires EXPLODE on the Dyno!!!! @ 200mph!!!
This was nuts! The tires blew up when the car was going about 200mph on the
The Camaro was making
over 1800rwhp!! The drag radials just couldn't handle it. They were testing
it to get the car ready for the Texas Mile, this wasn't the last time the
drag radials blew up, it happened again at the mile when the car was going
close to 220mph.
Note: this happened 2 years ago when testing for the TX Mile, this is not a
new video, just never before seen.
Built by: Late Model Racecraft
HTC Facebook: https://www.facebook.com/HighTechCorvettefans
HPD Facebook: http://www.facebook.com/HoustonPerformanceDriving
Watch this video for answers to all your questions (songs, car mods,
setups, etc..) along with bonus footage and updates.
This is a short documentary I made for a class. Using mostly my own found
footage, I give a commentary on "Sleepers" and my own personal experiences
This video was intended to tell a story and be mildly entertaining/funny.
No one in this film thinks they drive the fastest car on the planet. We are
all aware of our limitations.
Try to enjoy it :)
I'm getting messaged like crazy to reveal the mod lists for my cars. This
is a bit difficult to do for the Regal since it almost never had the same
setup on it for more than a few weeks! Anyway I'll try my best!
Z34 - Intake and chip. Stock at the time of the Iroc-Z race.
SHO - SHO SHOp catless Ypipe (That's it!!!) (Stock during most of the Races
in this Video)
vs tuned turbo Cobalt at the Track.
Regal: Headers, mild cam, pulley, tune and intake
Vs stock G8. Regal: same mods as above
11.9 @ 112 in the 1/4 on slicks with some c16 race gas mixed in, m90 blower
Vs full bolt on, gears, tuned 2011 Mustang v6. Regal: TVS swap with
stock TVS pulley. 7psi of Boost.
vs full bolt on, 3.55 gears, tuned 1998 Cobra. Regal: same setup as vs the
Vs 330whp low 12 second Vortech supercharged 2002 Mustang GT. Regal: TVS swap + 2.8''
pulley (14psi) and ethanol.
374whp with same mods as vs the blown GT
As always the Regal had stock heads and never had an Intercooler!
Thanks for all the comments!
First two songs:
"Wake of the Martyrs"
By Secession Studios
LS1 Gettin Sideways in 4th Gear
Just a quick launch video of my 2002 Z28 Camaro. This is my first launch
/burnout in this car.
To see it at the 1/4, follow this link:
0-125mph video follow this link: http://www.youtube.com/watch?v=SBbtp97n60c
LS6 intake ported
Ported stock TB
243 LS6 heads (off 2003 C5Z06 13k miles)
ARP head bolts
Nextec Manley Dual springs w/titanium retainers
Comp R lifters
Katech C5R timing chain and gears
Katech stock rod bolts
Ported Katech oil pump
Custom Cam 230/240- 598/603 113LSA
ASP under drive pulley
MSD wires, NGK TR55 plugs
American racing 1 7/8 headers, Offroad Ypipe 3in w/customer 4in merge
collector (made by American racing headers), Mufflex 4in catback (magnaflow
255lph in tank fuel pump
42lbs GM white injectors
SLP 85mm MAF
FLP air lid and K&N air filter
Performance 413rwhp/383rwtq-Tuned By Jeremy Formatto/fasterproms Performance out of Florida
Strange coil over 3 way adjustables on all 4 corners
BMR red rear springs
Spohn Tubular front K-member black
Spohn frame connectors boxed
Dual adjustable Panhard bar
Solid polyurethane transmission mount
Rear drag bar adjustable MWC
Mid West Chassis Fab 9in rear (black)
4.10 rear gears
Adjustable body mount torq arm
Adjustable lower control arms
Denny's driveshaft shop 1000hp aluminum driveshaft
6spd RKT56 built transmission all internals gone over, replaced synchro's
bronze sliders, billet keys etc etc built transmission
Textralia 0Z700HD clutch
Tick Adjustable master cylinder
Pro 5.0 short shifter with SLP leather knob
SS rear spoiler
17x9, 17x11 dark grey Torque thrust rims 275/40/17 front nittos, 315/30/17
rear nittos-tires are in near new condition
Alpine CD player with Ipod hook up, Wilwood ABS delete and proportioning
valve, Line lock kit. Front sway bar delete.
1980 ProTouring TA 640+HP - Restore a muscle Car, Overseas Project
One of the two 1980 ProTouring Trans Ams we are putting the finishing
touches on for a client overseas! Just a quick little video of the TA in
the shop parking lot! We will be posting a lot more video and pictures of
these cars over the next couple weeks! Full DSE suspension, minitub, Year
One Billet Snowflake wheels, custom Phoenix Graphix Decals, emblems, Big
Block motor pushing over 640HP with Super Street Figher turbo 400 Transmissions!
Camaro SS vs Turbo Civic
PLEASE READ DESCRIPTION BEFORE COMMENTING! THANKS!
▼Click "Show More"▼
This video was shot early on in 2008. Yes, he's a friend of mine. The
acting (if you can call it that) is us just messing around before battery
on the camera died. It was all done on the spot - no script - and the
racing was both cars going all out 100%. The Camaro has been 11.5's@122. Not
the fastest car on the road (by far), but enough to hold it's own with most
For those in complete & utter denial - doubting that the Civic was actually
turbo'd - here is the same car with a
duck call attached to the blow-off valve as a joke:
Thumping 370 Forged LS3...NASTY (first start)
First start on initial break-in tune so please forgive stalling issues
(actually throttle screw just needed tightening - doesn't stall anymore).
Forged 370 - LQ9 Block
ARP studs/fastened everything
Advanced Induction worked/ported 267cc LS3 heads
N2O Outlet direct port and dedicated fuel cell (pill'd to 500rwhp)
Pat G spec'd nasty n2o Cam
self-ported LS3 intake manifold
Koni/UMI everything (suspension)
ASP 3.5" driveshaft
QP Wavetrac'd 9"
2012 Pioneer flagship Nav/Audio/Video Screen
Fully leather wrapped, double french stitched interior, and backseat
FOUR 10lb n2o bottles, FOUR NANO 4500 bottles
Two 13.5" JL W6v2 (one behind driver and passenger seat)
19x14(R) 19x9(F) iForged Aeros (flared rear quarters, rear bumber and
C6 Z06 front brakes (laser blue) with "Trans Am" and firebird decals. Clear
So much to list, just know it's done right. New vids on the way.
UPDATE: It's a wide body now -
burnouts at 70 mph on slicks
Here's a quick video of some burnouts.... at 70 mph... on slicks. :) 2nd
version, with the music turned down a bit and the car and it's sounds up.
2500HP Worlds Fastest Camaro - 263.2 mph Twin Turbo - Texas Mile (Gearhead Flicks)
The Worlds Fastest Camaro - The Texas Mile October
Owner Kelly Bise and KP Racing take this 2002 Camaro SS with 2500 horsepower and Twin turbos to a whopping 263.2 mph run in the
standing mile. Driver Joe Huneycutt was able to beat last years record by
an impressive 10 mph! ... Talk about a Heavy Hitter!
Video Produced by Gearhead Flicks - More videos to come from the Texas