Playing around at a Drift event in Mineral Wells, TX - taken on 6/28/09.
1989 IROC Camaro, with LS1 & T56, more steering angle, Ground Control height adjustable spring setup (with stiffer springs). Flowmaster Exhaust, Spec stage 3+ clutch.
Derrick Rogers was driving while i was filming. Fabricated Motorsports event (for schedule of events go to www.FabricatedMotorsports.com
Towards the end of the long burnout the tire shreds the tread :)
Had a great time! www.BubbaDrift.com
'67 Crusher Camaro vs '70 Super Bee 1,500-Mile Burnout-Fest! - Roadkill Episode 19
On this episode of Roadkill, it's Freiburger in the Super Bee versus
Finnegan in the '67 Camaro as the guys make the trip
from Los Angeles to Salt Lake City and back to go race at the Midnight
Drags at Rocky Mountain Raceways in hopes of running the Bee on Nitrous for the first time since the Hemi was
installed. Which car will work best over 1,500 miles of mayem in three
The 700hp, blown Crusher Camaro is HOT ROD's longest-term
project car, surviving 20 years at the magazine. David Freiburger's 675hp
Hemi ¹70 Dodge Super Bee is his first car, having been with him 30 years.
Both cars suffer from magazine-project-car syndrome: getting brief spurts
of attention followed by long periods of neglect. For the first time in
years, both cars were running and driving at the same time.
The Crusher Camaro is a
'67 model that was purchased for $700 in 1994 during California's
car-crushing program; it was rescued from the parking lot of a junkyard
where it was about to be handed in for crushing. It's been through a number
of engines in its time at HOT ROD magazine, and the most recent is a 489ci
bi-block (4.280 bore, 4.250 stroke) with 9.3:1 compression. It has a small,
224-at-0.050 Comp hydraulic roller cam, Holley oval-port heads, and a
Weiand 8-71 Supercharger with two Holley
850HP carbs. The engine makes 700 hp and 720 lb-ft on 5 psi Boost, but is tame enough to drive anywhere.
The transmission is a Gearstar 4L85E that's really awesome, and the Ford
9-inch is loaded with 3.50 gears. The car is styled with Center Line Auto
Drags and a nose-high stance to look like a street machine of the early
¹80s. It has run 10.60 at 125 in the quarter-mile in the same trim seen in
Freiburger's ¹70 Dodge Super Bee is powered by a 10:0:1-compression, 484ci
Hemi with ported iron cylinder heads and a Comp solid roller camshaft. It
also uses a Holley Dominator carb on a custom dual-plane intake manifold by
Dick Landy, whose shop built the long-block in 1995. It made 675 hp on the
engine Dyno, but in
the car is has smaller headers, fairly restrictive Exhaust, and a mechanical fan that pull it down
to around 600. The trans is a Gearstar 727 Torqueflite backed by a Gear
Vendors under/overdrive, and the Strange 60 rearend has 3.73 gears (a
little too high for the
natuarally aspirated combo). The car weights 4,050 pounds with the driver,
and has run 11.80 at 118 mph on the motor.
Roadkill appears every fourth Friday on the Motor Trend channel.
Subscribe now to make sure you're in on all the action!
Facebook - https://www.facebook.com/RoadkillShow,
http://facebook.com/motortrendmag & http://facebook.com/hotrodmag
Twitter - http://twitter.com/motortrend &
Google+ - https://plus.google.com/1018679678590...
Website - http://www.motortrend.com & http://www.hotrod.com
Chevrolet Camaro Z28 - Test Drive and Hoon of a 3rd Gen
A simple morning drive featuring a 1982 Camaro Z28 with a few mechanical
updates. This car was built to be driven and I do... a lot.
Here's a list of some of the additions:
GM Performance 290 HP 350 c.i. crate engine
Baer T4 Cross drilled and slotted brakes
Flowmaster 3" Exhaust
Spohn tubular control arms and torque arm
Koni adjustable shocks
Flaming River quick ratio steering box and leather wheel
OMP racing seats
6 point mild steel cage
6 Speed manual transmission built by Hanlon Motorsports
...and the seriously sweet Alpine cassette stereo from the 80's!
My first attempt at real editing software with real footage.
Music in this video is
Skrillex "With you, Friends (long drive)"
I do not own rights to these songs.
Please visit socalmuscle.net or truestreetcars.com for more info on this
1985 Camaro Start to Finish
This video chronicles the transformation to my wife's first car, a 1985 Camaro. She bought the
car in 1995 and when we first met she was driving it. We decided to sell
it to my brother a few years after we got married. During the summer of
2008, I reacquired the car and secretly brought it back to its original
1988 IROC-Z Camaro burnout donuts
My '88 IROC doing some burnouts and having fun on private property. Car
was still stock at this point other then some Exhaust and lowering springs.
3rd Gen Camaro Build
A (lotta) work in progress. I started this project to swap a 191cubic inch
V6 to a 350 V8 (along with performance parts, and swapping & upgrading the
transmission) in 2009. (see modifications list below.) These are pictures
and videos as I progressed and the very first engine start and test drive.
I applied primer to protect the metal as I knew I would have to put the
project on hold, which is where it has been since. Plan to start again by
gutting & redoing the interior here in 2012.
350 block swap
moddified Vortec heads
CompCams XE268 cam
Edelbrock Performer RPM Vortec intake
Edelbrock 750cfm AVS carb
Headman 1 5/8 headers
- .500" line pressure Boost valve
- huge servos
- servo release check valve
- TCI throttle valve
- TCI Breakaway 2400 stall converter (lockup)
- B&M ratchet shifter, front oil cooler, TrickShift oil.
Plymouth Superbird V8 drifting
Chippen test drifting Tommy "Tiger" Björk´s Superbird on Xtreme Speed
Festival. The long nose is off to be able to change the steering angle more
easy. It´s not good enough - Samuel Hübinette on location said no thanks.