'70 Cougar Convertible Buying Guide - What To Look For
Having recently bought a 1970 Mercury Cougar XR7 Convertible with a 428
Cobra Jet, Don started going over the car with a fine-toothed comb and
discovered a few things he didn't notice when he first inspected the car
with the seller. This was the inspiration for this video, in which we spend
some time looking at some of the details, like a forensics team, to find
out some important details about this car (both good and bad).
This time, we don't spend any time looking at matching numbers and date
codes and engine "correctness" (sharp-eyed viewers will notice the
incorrect oil pan... the engine block in this car turned out to be a 390
that was bored out and had the Cobra Jet heads and manifolds bolted on).
Our main focus here is to evaluate structural integrity and bodywork. When
it comes to expensive and involved repairs, it doesn't get much worse than
bodywork, so you want to make sure the car you're looking at is as straight
and rust-free as possible.
We hope this video proves helpful! Keep these hints in mind the next time
you go to look at a classic car, Cougar convertible or otherwise. Some of
the info here is specific to Cougars, but much of it applies to other
classic cars as well.
Looking for Cougar parts? We have everything 1967-1973. Visit
Also, like us on facebook: https://www.facebook.com/WestCoastClassicCougar
67-68 Cougar Buying Guide: What To Look For
In this video, Don does a detailed inspection on a 1967 Mercury Cougar XR-7
to show some of the things you should look for when buying one of these
classic cars. Some of the insight here can potentially save you hundreds,
even thousands, when you go to negotiate with a seller. Also, it will help
those of you trying to sell, to more accurately advertise the strengths and
weaknesses of your car.
We've also done a similar video with a 1970 Cougar convertible, so you may
want to check that out too. http://www.youtube.com/watch?v=Fizb2vo68vA
To look up the parts mentioned in this video, visit
Subscribe to our channel to keep up with our latest uploads! And while
you're at it, like us on Facebook to keep up with miscellaneous cool Cougar
Front Suspension & Chassis Upgrades - '68 Cougar / Mustang
In this video, we show some of the ways you can easily stiffen your car's
chassis and upgrade your front suspension. Using Andrew's '68 Cougar as a
guinea pig, we bolt on, and weld on, some simple parts that will make a big
difference in reducing the torsional flex that these front ends are prone
to, as well as improving the integrity of the shock towers.
Most of the parts mentioned in this video can be found here:
Springs we used:
Rear seat divider panel (67-68 Cougar):
See also: 69-70 Cougar panel:
If we forgot to list anything, you should be able to find it on our
While you're here, subscribe to our YouTube channel to stay up to date with
our latest videos! Also, like us on facebook here:
Convertible Top Installation: 1969 - 1970 Cougar / Mustang
In this episode, we tackle the daunting task of installing a convertible
top on a 1969 Mercury Cougar. Instead of stumbling through it ourselves,
we watch a professional do the installation and take note of some of the
details and tricks involved in the process. Javier was there to help and
translate, and the end result was a great looking black convertible top.
Parts we used in the video can be found in the convertible top section of
our website here: http://www2.cougarpartscatalog.com/convertible1.html
Or, here are some of the individual parts we used / mentioned:
The convertible top itself:
Rear tack strips: http://www2.cougarpartscatalog.com/69convtackstrip.html
Tension cables: http://www2.cougarpartscatalog.com/c9zz-7652806-a.html
Bow Pads: http://www2.cougarpartscatalog.com/c9zz-7652875-bk.html
Conv. Top Latches
Header seal retainer: http://www2.cougarpartscatalog.com/69vertretain.html
Weatherstrip Kit: http://www2.cougarpartscatalog.com/d534.html
There are a lot more convertible top related parts we didn't even mention,
so browse around and find what you need!
If you like our videos, you can subscribe to be notified when we come out
with a new one.
Also, like us on facebook! http://www.facebook.com/WestCoastClassicCougar
1999 Mercury Cougar 3L Turbo "Time Warp"
Video camera was securely locked into the camera holder, but the holder was
slightly loose. This lended to create a really cool "Time Warp" effect. The
turbo is a Precision SC-61 and the turbo kit is home made using a TiAL 50mm
BOV and TiAL 38mm wastegate and all 304SS tubing.