Massive thanks to Jamie and Dan from ROTORG33K for the footage of our Dyno day back in November 2010.
Chris Hall's car was acutally in at the workshop before the Dyno day having some work done before the next round of racing. After he had run his RX4 up eariler in the morning he decided he wanted another go so he entered his 20BKILR 13B turbo Brigle Port Drag car for all to see.
48 Smallwood Street
Underwood, QLD 4119
Phone +61 7 3341 1111
RX4 Rotary 13B turbo dyno - Promaz
Mazda RX4 street car powered by a 13B bridge port rotary on the Dyno at Promaz Automotive. The
car is Boosted by a Garrett T66 turbo and MicroTech EFI fuel system.
[ http://www.promaz.com.au ]
Ras / Bodyform RX-7
Car: RX-7 Series 8
Work Completed by: Peter from Bodyform
Acknowledgement to Motive DVD Issue 9 for this video.
WORLDS FIRST 7 SECOND STREET RX7 - 20BKILR
Archie driving the car to three 7 second passes on this day, 2 of which are
recorded here. This car runs the Mazfix 13bt setup. Now owned by Chris
Hall. It was the first untubbed rx7 to our knowledge to run a seven second
quarter mile. The car runs a 28x9 inch tire.
Part 12: 13B Rotary Engine Rebuild - My 76 Mazda RX-5 Cosmo Restoration
Just as I promised last episode, it is finally time to build the engine!
Part 12 of my RX-5 Cosmo restoration covers the entire process of building
the 6 port 13B Mazda rotary engine. While this engine is a hybrid of GSL-SE
RX-7 and Cosmo parts, the process is the same for any rotary from a 12A to
a 13B NA, 13B turbo, 13B-REW or any
other variant of the 13B. This video shows the whole process of the engine
build, starting from measuring the rotors and covering everything else
including clearancing the side seals, assembling the rotors, complete
assembly the short block, setting the eccentric shaft end play and
installing the front cover and everything underneath it. It's probably the
most complete engine build video outside of what you can buy from the
vendors, and as such, is an hour long. After this one, I'm going back to
videos under 20 minutes. But for now, grab a beverage of your choice, sit
back, and enjoy.
PJ is BACK on Rotorg33k with MORE POWER at Supernats 2010
You may have seen our friend PJ on our YouTube Channel, Ladies and Gents
this is not a rotary, its is a SR 20 that turns out big power at the
wheels, as you can see PJ at supernats for 2011 kicking ASS!! congrates on
cheers RG and Mini RG
JAMBOREE SYDNEY PROMO VIDEO
Jamboree Sydney was a crazy event, stay tunned people's its going to be a
full on crazy event covered by the one and only ROTORG33K.COM
LS1 DATTO UTE RIPPEN HELIES
datto 1200 ute fitted with a screaming LS1, massive massive burnout great
show on the day of 2010 SUPERNATS with proud sponser IDRAG and
ROTORG33K.COM, stay tunned guys we got heaps more coming!!
Mazda Rx7 13B turbo Dyno run
this is Joe's Mazda Rx7 coming soon Dyno run, it runs a mazda 13B turbo engine, Ford toploader transmission
and 9 inch rear, it will be hitting the track very soon, stay tuned for
MAZFIX 20B MAZDA 6 TESTING IN OCTOBER
We were out with bigger tyres, new gearing and rear end setup, and from the
start of the day, you can see the progression as we fine tuned everything.
We hope to be out once more at Willowbank, before we road trip to Sydney
for APSA in November.