RX7 VeilSide Fortune Build Tokyo-Drift - Half Way To Stardom
So we're coming up to the halfway point of this build. The kit is almost
fully mocked up and fitting nice ready for fibre glassing.
The kit originally fitted really badly, and really wasnt worthy of the
RRP... but, we're the best custom garage in the south west so things like
this are just a walk in the park for us.
See the finished build here http://youtu.be/L-fIecq_ank
More updates will be coming soon, and also check out our other videos!
7sDay - Sound of Rotor
7's Day 2011 - 7/7/2011
Rx-7 Enthusiasts meeting at Tsukuba TC2000
Mazda Rotary Festa with RE-Amemiya and RE-Xtreme
Ras / Bodyform RX-7
Car: RX-7 Series 8
Work Completed by: Peter from Bodyform
Acknowledgement to Motive DVD Issue 9 for this video.
My RX7 LS6 Transformation
This is a video documentary of my RX-7 LS6 transformation and build. This
was back in 2006 on my 1993 FD RX-7. It was a fairly modded FD when I
bought it from a buddy of mine in the NW area. I fly out there, one way,
and drove it back cross-country with a close friend of mine. Amazing road
trip!!! The work was done by A-Spec Tuning in IL. It was their first LS
modded RX-7. It has a mix of photos and video. I hope you enjoy and
Mazda Rx7 4-rotor race car. The making of a Defined Autoworks Beast. [Offical Video]
Never before seen footage showing the assembly/start-up of our custom
4-rotor. It is the first 4-rotor since the 787b to use triple spark plugs
per rotor. It is also the first since the 787 to feature telescoping intake
manifold. Custom made slide throttle body system. A world first however is
the use of a center main bearing and 4-piece eccentric shaft. Quick specs-
9.7:1 rotors, lightened and race clearanced. Race main bearings, and race
rotor bearings, ceramic NRS 2mm apex seals. Custom stationary gears, Full
custom Peripheral Port in each rotor housing (defined auto), Aluminum side
housings for reduced weight. Needle roller bearing in the center housing.
4- Piece eccentric shaft 0:47
Dynamic engine balancing 1:23
Variable length intake 2:20
Engine assembly 2:32
Rotor rotation 3:49
Slide throttle 4:00
4-rotor startup and idle 4:30
All footage and editing was done by Defined Autoworks. Music by Ivan
Contact us at 614-592-7991 we build any type of rotary powerplant to the
See the build thread here-
Mazda RX-7 FD3S 3-rotor Twin Turbo 550HP - Lovely Turbo Sounds!
I have recorded this Mazda RX-7 FD3S 3-rotor Twin turbo which is customized with an aftermarket Exhaust, rims, carbon details and more!
This RX7 has now more then 550hp!
As you can see, this RX7 accelerates very easily and it's even faster then a stock Ferrari 599 GTB F1
1st Channel: http://www.YouTube.com/GUMBAL
2nd Channel: http://www.YouTube.com/GUMBALTV
3rd Channel: http://www.YouTube.com/CarChannelClassic
Thanks you for watching my videos. All feedback on my videos are
appreciated! Don't forget to like the video and subscribe to my channel.
More videos coming up!
JET powered Mazda RX-7
Russell Clarke's Jet powered Mazda FD RX-7 from Heathcote Park Raceway. The
thrust is turned right down due to minimal braking distance. Best speed to
date is 160mph to the 1/8th mile.
Rx7 Rotary Rebuild first Start up
Build up and start up of my 93 RX7.
I was able to do the whole rebuild myself :) apart from Ethan and Clint
helping me for some of the two men jobs... Turns out... No Exhaust leak.?
15PSI on my GT35R single turbo RX-7
Watch as I beat on my RX-7. Ever wonder what no BOV sounds like? Ever
wonder if you can hear water injection? Have all of your questions answered
in this video
Nitrous LSx Mazda RX-7 vs E85 Big Turbo EVO on slicks!
EVO HAD CLUTCH ISSUES REMATCH COMING SOON!!
OutOfOrder EVO vs DNR Performance LSx RX-7
Shoutout to 3HeadedElephantS for the GoPro Footage! Checkout his channel
and subscribe, also watch his badass edit of this same race here: