If your dashboard indicator tells you a light is out it may be the Halo / DRL / Angel eye light that is burned out. It's that cool set of rings around each headlight. Mark takes you through all the steps and tricks it takes to change the light yourself if you're the kind of person that likes to save a couple hundred bucks (Canadian)
Installing LED angel eyes bulbs on e90 BMW
The video contains a quick reference of how to install angel eyes on your
e90 BMW. I replaced the OEM bulbs with pure white angel eyes (LM90LCI-N).
I also included some pix of the final install and towards the end of the
video is a picture slideshow of the installation (once again) in case the
video was not clear.
Plastidip Taillight Tint Stencil Diy
Here are the answers to most of your questions....
1. Will it come off?
No it's not permanent but YES it is resilient. I had it on my lights for
months with out it getting scratched or peeling.
2. Is this regular or smoke Plastidip
It is regular. I do say this in the video, however I should have put it in
the description. Sorry for the confusion.
3. Is that Forza Music? What kind of car is that?
Yes it is! :) Makes for great ambient music. Also, it's a BMW 335xi. It's
my winter car. (thus the whole "it's cold right now" in the video)
4. Yes it IS illegal.
At least where I live. HOWEVER, no I didn't get pulled over once for it. I
got pulled over for speeding and the cop didn't even mention it. I really
think it just depends on the cop that is behind you and how he feels about
5. isn't it too dark? Aren't you worried about people not being able to see
your lights when you brake? etc.
No, in the video they might look KIND OF dim, but in person the light
output was barely changed. HOWEVER, that doesn't mean that it wont be on
your car. It depends on what kind of bulbs you have, HOW MANY COATS YOU
DID, and just in general how nice your lights are. Either way, it was not
an issue with me and not once did I get the impression that someone
couldn't see them. Plastidip IS very transparent if you do a few light
coats... you literally JUST watched proof that it is... lol
6. Why didn't you use film? or why didn't you use "night shade"?
First off, I didn't use night shade because until I read these comments I
hadn't ever heard of it.
Second, I didn't use film because the other sets of film that i've used
either didn't fit right, were a pain to take off, peeled up on the edges,
and were much more expensive than this DIY.
7. Why did you use masking tape instead of electrical tape, duct tape etc.
Because masking tape leaves ZERO residue. Duct tape and electrical tape can
both leave lots of residue. As I stated in the Video though, you can always
use flexible nylon/ straight line tape I believe for round edges.
8. Why didn't you just mask everything BUT the clear part then blah blah
really?... mask the part that I WANTED to paint?....
A. that would have taken forever
B. it would have used WAY more paint.
C. I would NEVER mask everything then use a razor on my tail lights....
thats just silly.
9. What was the point of the "press and seal"
The point of that was to show you another way that I had seen it done. I
then went on to say how I do not reccomend it cause you would get garbage
10. How many coats did you do?
If you watch the video I technically did 1 coat. it was a thick coat but I
did that because I knew I wasn't going to be laying it on to the point that
it was not transparent. you will have to be the judge on how many
coats/passes you do. Good news is, if you put on too much, or too little,
no worries! It's plastidip and it'll come right off! Than do it again!
11. Could you do this on your headlights?
I guess you could... although I could see that being a much easier way to
get pulled over. But really, it's worth a try. Worst case is you tell the
cop that pulls you over that you didn't realize it was illegal and ask him
if he'll give you the opportunity to peel it off on the spot.
12. Do you feel the edges with your hands?
You can if you rub your hand over it, but it's very faint. And no it did
not make it peel.
Really at the end of the day, Like I said in the video. Its not everyones
style. It's non permanent, it's SUPER cheap, and most of all THIS MAINLY
WAS A TEST AND A GUIDE ON HOW TO STENCIL YOUR TAIL LIGHTS not REALLY how to
plastidip your lights. So use whatever product you want. I just used
regular dip cause I had some lying around from doing window trim.
And like most mods to your car, you're doing this at your own discretion,
so be safe and use common sense. if you "black out" your lights, you may be
running the risk of accident. So only go to the point that they are still
Thanks for all the thumbs up, and all the kind comments. Hopefully this
answered most of your questions.
SPECDTUNING INSTALLATION VIDEO: 2006 - 08 BMW E90 3-SERIES 4 DOOR PROJECTOR HEADLIGHTS
SPECDTUNING is proudly recognized as pioneers in the automotive industry
for products and service. Our main goal is to provide the highest quality
products at the lowest prices imaginable. The SPECDTUNING warehouse is the
largest in Southern California carrying an array of aftermarket products.
With a wide range listing from: Projector Headlights, L.E.D. Tail Lights,
Third Brake Lights, Bumper Lights, Corner Lights, Front Grills, Bumper
Lips, down to Headers. These are just a few items mentioned from the
selection available. Furthermore, all the products are updated constantly
keeping SPECDTUNING ahead in the industry for all makes and models of
vehicles. Always prepared to serve every guest; please visit us at
SpecDtuning.com for more info or call 909-839-2533 to start a wholesale
account today or visit us at www.specdtuning.com. Staff at SpecDtuning are
here and ready to help.
BMW Intelligent Headlight Technology
First introduced on the new BMW 7 Series (July 2012) as part of the
optional Adaptive LED Headlights, this functionality is now also supported
with Xenon headlights on all new BMW 3 Series Saloon and Touring models
specified with a Visibility package.
BMW Adaptive Headlights are combined with BMW High-beam Assistant
technology to provide an intelligent headlight system that optimises the
illumination of the road ahead without glaring on-coming traffic and other
road users. This ensures improved visibility and safety during night time
and poor weather driving conditions.
How to repair and paint alloy wheels at home with spray cans (BMW 44s) PART 1
See Part 2 (Painting) here: http://youtu.be/ibrHMKYk03M
I've wanted to try and refurbish a set of BMW 44 style alloys for some
time. This is video is the first video of 2 recording the process I went
through to get these battered, gutter rash, kerb damaged alloys back to
their former glory.
This is my first attempt at refurbishing alloys. I hope you enjoy the
videos and maybe feel inspired to try this yourself.
BMW e90 Hidden Menus OB & iDrive Showcase
BMW e90 showing some of the hidden menus in the onboard computer and the
ones on iDrive.
One important menu not showed is Current fuel in tank (in liters).
EDIT: Song is Barbara Tucker - Beautiful People (original club mix) by
Top 10 BMW Fails Compilation 2013
Top 10 BMW Fails Compilation 2013
SUPPORT THE ORIGINAL VIDEOS:
Fail compilation Video -BMW Drift Fail
Female, BMW and snow - a terrible combination
Idiot with a BMW https://www.youtube.com/watch?v=YDaHA39EwhQ
Besoffener Idiot - BMW Syndikat Asphaltfieber 2011
BMW Clutch Fail! https://www.youtube.com/watch?v=87HzYTPfi2M
Bmw M6 Fail https://www.youtube.com/watch?v=87HzYTPfi2M
BMW X5 crash at parking https://www.youtube.com/watch?v=3KZRa3sYD-I
Fail drift on BMW E30 https://www.youtube.com/watch?v=KaB7DRBTy74
BMW drift failed auto crash 2012
BMW 740i FAIL https://www.youtube.com/watch?v=JwsI3_7q4JM
bmw s1000rr , bmw 2013, bmw grip, bmw x6
BMW Drift Fail, Idiots with BMW, BMW Clutch FAIL, BMW CRASH, BMW BURNOUT,
BMW COMPILATION, FUNNY BMW FAILS, PARKING CRASH, BMW M6, BMW X5, BMW E30,
BMW 740i, BMW IN WATER
BMW Crash Compilation #1
Rate, Share and Subscribe !
Like us on Facebook: http://www.facebook.com/topcrashes
Car Crash Community: http://gplus.to/carcrashes
Follow on Twitter: https://twitter.com/CarCrashWorld
BMW Hood Emblem Replacement DIY Roundel Replacement Made Easy
I show a few different ways to remove the BMW hood emblem roundel using
items and tools you should have easy access to. I also go over some tips in
case the roundel does not stay in place once you get the old one off due to
the two retaining clips failing on the hood.
Lamborghini Aventador لمبرجيني افينتادور
كريم يفاجئ صهيب بسيارة أحلامه لمبرجيني
أفنيتادور في تجربة قيادة على طرق دبي
Kareem surprises Suhaib with a test drive of his dream car Lamborghini
لمشاهدة الصور باعلى جوده على الرابط:
تعرف على اسعار ومواصفات سيارات
لامبورغيني على الرابط: http://goo.gl/Z0iXWm
Google + :
Installing LED Upgrade Bulbs on Stock BMW Angel Eyes - BavAuto DIY
BLOG ARTICLE: http://blog.bavauto.com/go/LED-angel/
"Like" us on Facebook - http://www.facebook.com/BavarianAutosport
"Follow" us on Twitter - http://www.twitter.com/BavAuto
"Subscribe" to us on YouTube - http://www.youtube.com/BavarianAuto
Visit our online store - http://www.bavauto.com/
Items shown in this video are available in our online store at -
http://www.bavauto.com/. Need additional tech help? Please visit our tech
blog for thousands of Tech and DIY BMW and MINI articles at:
In this video we will show you how to install the Weisslicht LED upgrade
angel eye (Often called Halo rings or Demon eyes) bulbs on an early E90
3-series sedan (06-08). This installation requires removal of the inner
wheel housing splash guards in order to access the Angel Eye bulbs. Most
other BMW installations are an easy direct replacement for the original
bulbs and are done from under the hood.
Start by safely lifting and supporting the front of the vehicle (see our
article on how to safely lift and support your BMW at -
Remove the front wheel and tire. Now, remove the inner wheel splash liner
by removing the 8mm and 10mm fasteners and then pull the liner out. We can
now remove the angel eye bulb housing cover by using a screw driver to pry
the upper and lower locking tabs and pulling the cover rearward. Remove
the two wiring connectors from the bulb contact terminals. Use the included
T-15 Torx driver tool to loosen and remove the two Torx screws. Pull the
bulb assembly rearward and out of the housing. Also remove the bulb
mounting bracket. We'll now mount the new Weisslicht LED angel eye bulb
assembly to the plastic mounting bracket and reinstall the assembly into
the headlight housing. Install the two Torx screws and connect the two
wiring connectors to the LED bulb assembly. Before we finish the
installation, turn on the lights to test the new LED installation. If all
is working properly, finish the install by reinstalling the bulb housing
cover, inner wheel liner and the wheel and tire.
You now have bright, white, LED angel eye rings that nicely match the HID
(Xenon) headlight bulbs and make your BMW look more like the current models
that have original LED angel eye rings.
The products used in this video can be purchased in our online store,
http://www.bavauto.com/, 24 hours a day, 7 days a week. You are also
welcome to e-mail us at email@example.com or call into our headquarters and
speak to our knowledgeable advisors at (800) 535-2002 (Mon.-Thurs. 8AM to
9PM EST, Fri. 8AM to 7PM EST, and Sat. 9AM to 4PM EST).
LED Angel Eye Bulbs for -
Early E90, E91 (3-series sedan and wagon 06-08, exc M3) -
Late E90, E91 with Halogen headlights (3-series sedan and wagon 09-11, exc
M3) - http://www.bavauto.com/fland.asp?part=LHUXX3W2Y90LCI
Late E90, E91 with Xenon headlights (3-series sedan and wagon 09-11) -
E92, E93 (3 series coupe and convertible 07-11) -
E90 M3 (sedan 08-11) - http://www.bavauto.com/fland.asp?part=LHUXX2W2Y90M
E39 with original angel eyes (5-series 97-03) -
Early E60 with Xenon headlights (5-series 04-07) -
Late E60 with Halogen headlights (5-series 08-10) -
Early E63, E64 (6-series 04-07) -
Late E63, E64 (6-series 08-11) and E70 (X5 07-13) and E71 (X6 09-13) -
E65, E66 (7-series 02-08) -
E53 with original angel eyes (X5 00-06) -
2015 BMW R1200GS * What Would Steve Jobs Do?
First Ride & Review of the new 2015 BMW R1200GS . It comes in new colors
and has keyless start and shift assist in addition to a heavier crankshaft.
It's all good. Steve Jobs isn't dead, he works at BMW.