ALH, TDI, R&R 10-4!
Volkswagen MK4 1.9L TDI rebuild. Finally cleaning up all the these extra
parts and putting them to use for this build. With a little plastiguage and
final measurements all should work great! THANKS FOR WATCHING
Beltstowing Crown Vic No Start!
It took a bit of thinking to check it over but it turned out to be nothing
If you wander of the beltstowing channel tell him he should trade the crown
vic in for a MOPAR
THANKS FOR WATCHING
New Beetle TDI Engine Swap
Removal made to look easy and soon to install of the rebuilt engine we put
together last week. THANKS FOR WATCHING
Jetta VR6 Diesel Swap
I was really surprised and impressed with this. Someday I know I will
attempt but very interesting and good for future reference. thanks for
It's Alive !!! Trans Am Engine Swap Part 12 - 357 V8 Street Demon Carb 1987 Pontiac TA
The Trans Am is finally running again. The engine is sounding really nice.
Just have a few more things to button up before we can take a little test
drive. The main thing holding us back at the moment is the Throttle Valve
Cable for the trans. I need to get it properly set up before we can drive
it. It feels good just to hear it run well though. Thanks for watching
along, we appreciate it. There will still be many more videos to come in
this engine swap series, as well as more vids on restoring/modifying the
Trans Am in other ways.
Trans Am Engine Swap - Test Drive with Hood Installed - Cruising at Night
Jordan and I finally have the hood back on the Trans Am. As I explain in
the video, we had to use a thinner air filter for the moment, so the the
factory hood would fit. We plan to add either a Ram Air or a cowl
induction hood at some point. For now, we just wanted to get it back on
the road so we can get some break-in miles on it. In the days ahead, we'll
be making many more changes to the car. We are going to redo the fuel
lines with braided line, maybe install a different throttle cable bracket,
add a valve cover breather and a PCV valve, put on a new dashpad, etc...
There's still tons to do. Thanks for watching along, we appreciate it!
LS Engine Swap Part 3 - Fuel Delivery System, Hose & Hose End Assembly
Part 3 of Chuck's Garage brings you the 3rd installment of our LS Engine
Swap Build into a '69 Chevelle chassis. This time Chuck tackles the fuel
delivery system and give us some tips on assembling the hose and hose ends.
Billet Electric Inline Pumps:
Billet Fuel Filters:
Billet Fuel Pressure Regulators:
Earl's Pro-Lite 350 hose:
-6 AN Male to 9/16" -18 O-Ring Port: http://www.holley.com/AT985006ERL.asp
-6 AN Male to 3/4" -16 O-Ring Port: http://www.holley.com/AT985068ERL.asp
-8 AN Port Plug O-Ring Seal: http://www.holley.com/AT981408ERL.asp
-6 AN Male Union: http://www.holley.com/AT981506ERL.asp
Straight -6 AN Swivel to 1/4" Male NPT: http://www.holley.com/916106ERL.asp
90º -6 Female to -6 Hose: http://www.holley.com/AT809106ERL.asp
Straight -6 Female to -6 Hose: http://www.holley.com/800106ERL.asp
45º -6 Female to -6 Hose: http://www.holley.com/AT804506ERL.asp
Trans Am 357 V8 First Test Drive Video After Engine Swap
This our first video of the Trans Am in action after the engine swap.
Obviously, the videos will be more interesting after we break the engine in
a bit more. Right now, we are still adjusting and tuning things. After the
engine has sufficient time to break in, we'll show you what it can really
do. Thanks for watching!
Pontiac Trans Am Engine Swap Part 11 - Fuel Pump Choke and Fans
This should be the last video before we start the car. Today, or plan is
to fire it up for the first time. For those who haven't been following
along...my son and I are swapping in a carbed 357 in place of the original
TPI 305. It has been a fun project so far, with only a couple minor issues
to this point. Thanks for watching, we appreciate it!
LS Engine Swap On A Budget - Part 1 - Chassis Intro, Oil Pan & Engine Mounts
Chuck takes us on a tour of his $100 69 Chevelle chassis he picked up on
Craig's List. He also walks us through as he swaps out his Big Block 454
for a 5.3L LS Engine.
LS Retro-fit Oil Pans:
Engine Swap Mounts: