69 Camaro 632ci
We call this kid M2B for "Motor too Big"
Big Block Chevy 632 in an original 396 SS Camaro
572 Cu In Streetable Big Block With 750HP
Live engine run of a Chevy 572 big block...engine will be run in a '66
Chevy Chevelle...Proformance Unlimited...There is no other
Our staff is available to assist you with any questions you may have
Monday-Friday 8am-5pm 800-267-3940 or via email
We look forward to speaking with you.
PRO STREET AMC EAGLE SX4 * INSANE WHEELIE * HOLY SH*T WHEELSTANDER * 9.78@137MPH * "FREAKINEAGLE"
Awesome wheelstand at Richmond Dragway. '81 AMC Eagle SX-4. Stock bore 454
with tunnel ram with 2-4's. This weekend it ran 6.16 @ 112 in 1/8th and
9.78 @ 137 in 1/4!! All motor! No juice, blower,or turbo charger, just Big Block Chevy power. The
next run the FreakinEagle stood straight up on the back bumper and almost
flipped backwards. Our day was done. What a show. The Dragway told us not
to come back until we had whleeie Bars! Ha, Ha.! Most people think it is a
Pinto on steroids. The short time (60' time) is less than 1.39. Not too
shabby for a stock leaf spring with SSM slapper bars and a stock Nova
12-bolt rear with 4.10 gears! Hard to beat that "bullet proof" Genuine GM
LS-7 Big Block Power! Basically a stock GM LS-7 BBC Engine with cam and
2-4's. "NUFF SAID"! HOTROD. No, that is not a photo shopped picture. People
just do not care for AMC Cars. Go figure. I guess it is because it has an
awesome GM motor in it. Well how many AMC's do you see drive into the
Dragstrip and run a 9,78 @ 137
mph???????????????????????????????????????????? Well By God this one did
and it is still sitting in my driveway.
Tunnel ram tuning
I had a very large bog off the line that was killing my 60' times which
have dropped from a best of 1.46 to 1.65. Tuning out a flat spot on my
tunnel ram fitted with 660 holleys , home made pump cams, drilled shooters.
Nearly there but not quite.
63 Nova Tunnel Ram
1963 Nova with 11:1 compression, Lunati VooDoo 60104 cam, fully ported and
polished double hump heads with 2.02/1.60 valves, Weiand tunnel ram topped
with 2 Holley 450's, long tubes going back to 3" Exhaust with flowmaster outlaw mufflers.
fresh bbc 427 on the hillbilly run in stand
i just finished this and wanted to hear it run . its 434 cid big block
chevy 12.5 to 1 cr, solid roller 284durr 690 lift , 990 large port heads
219/188 valves with a nice port job . this motor was built as a back up
motor for a dragster project , and never used . i may try to squeze it in
my s10 for next season , if so i will post video of build . thanks for
watching . audio sounds way better in person !
750HP 454 CHEVY ENGINE START UP ON GROUND*HOT RAT ROD ENGINE*CRAZY INSANE CAM EXHAUST * NASTY
This is the 454 LS-7 Big Block Chevy I have owned since '91. Stock bore,
steel "990" heads, .710 lift Comp Solid Roller Cam, Brodix aluminum ported
intake, 1350 cfm Holley Dominator, Comp. Hooker Headers. These motors come
from the factory with 12.5 pistons, steel crank, 4-bolt mains, and the best
of everything. The most "Bullet Proof" engine GM ever made. We rev it to
7000 rpm every shift. Best time was 9.78 @ 137mph in 1/4 and 6.16 @ 112mph
in 1/8 mile. 3000 lb. car with driver. "Foot Breakin', NO electronics at
all. No trans brake.
540 Big Block Race Engine 650+ HP #9122
540 Big Block Chevy Mud Race Engine by Proformance Unlimited...You can view
this engine package along with available upgrades at the following link:
Big block Chevy 540 stroker with 630 Hp performance aluminum head engine
combination was designed for maximum street/strip performance on pump gas.