Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

How to Repair Car Paint Damage : Black Pad Buffing a Car's Paint Job

Black pad buffing techniques use a soft pad to polish or glaze the final paint job when repairing car paint damage ; learn how from our expert custom-car mechanic in this free auto-restoration video. Expert: Doug Jenkins Bio: Doug, of Doug Jenkins Custom Hot Rods, not only servers the entire nation, but even customers outside the U.S have found the shop's services indispensable. Filmmaker: Ross Safronoff


 


More Videos...


How to Custom Paint a Car : How to Spray a Single Stage Car Paint
Spray a single stage paint, starting with the door jambs and then moving to the outside, when giving a car a custom paint job; learn how from our expert custom-car mechanic in this free auto-restoration video. Expert: Doug Jenkins Bio: Doug, of Doug Jenkins Custom Hot Rods, not only servers the entire nation, but even customers outside the U.S have found the shop's services indispensable. Filmmaker: Ross Safronoff





How to Restore a Car's Paint Job : How to Spray Car Paint with Clear Coat
After pulling the masking paper off, spray a car with clear coat in two stages; learn how to clear coat a car in this free auto-maintenance video. Expert: Doug Jenkins Bio: Doug, of Doug Jenkins Custom Hot Rods, not only servers the entire nation, but even customers outside the U.S have found the shop's services indispensable. Filmmaker: Ross Safronoff





How to: Car Repair : How a Car is Prepped for Painting
From using primer to block sanding a new panel, learn how a car is prepared in order to be painted from our experts tips in this free auto-body repair video. Expert: Lyndon Graves Bio: Lyndon Graves, has been a professional insurance adjuster, and specializes in automobile industry. Filmmaker: Nili Nathan





How to Repair Car Paint Damage : Buffing Equipment Used to Repair Car Paint
Buffing equipment, like pads and compounds, is needed to replace a car's paint job; learn what you need from our expert custom-car mechanic in this free auto-restoration video. Expert: Doug Jenkins Bio: Doug, of Doug Jenkins Custom Hot Rods, not only servers the entire nation, but even customers outside the U.S have found the shop's services indispensable. Filmmaker: Ross Safronoff





How to Paint Your Car - Step by Step - PART 1
How to Paint your car at home. Step by Step guild on how to spray your car and fix minor dents or dings using body filler. Part 1 includes going over the basics and how a HVLP spray gun is cleaned before being put to use.





How to Paint Your Car Yourself - Auto Body Repair (1 of 2)
Like us on Facebook - https://www.facebook.com/pages/RefinishNetwork/130126840847 Refinish Network consists of various professional and enthusiast painters whom work collectively to help eachother out using the websites discussion forum. You will also find various helpful 'how to' articles from painting to body repairs. This illustrates the basic steps on how to paint a car, please check out my other auto body repair video's for more information on how to paint a car yourself, updated video includes the use of aerosol cans! This shows the steps necessary from start to finish of a minor dent repair on the quart panel of a sunfire. It includes filler application, block sanding, priming, sealer, painting & clearcoat application. There is many things to know if your looking to paint your car. Although this was done in a professional spray environment it can be accomplished the same at home but with likely a lot more polishing after. This how to paint a car video assumes a bit of knowledge and if you need some more feel free to visit our website for how to paint articles or look at the other videos on our channel





How to Blend Car Paint (Base Coat / Clear Coat)
This is a basic sprayjob of a honda civic side. It had a used door put on and required painting and blending into the fender and door. Find us @ http://www.refinishnetwork.com on Facebook http://goo.gl/RaFEjr Twitter https://twitter.com/refinishnetwork YT Channel http://www.youtube.com/user/jimmo4life Other Great Video's to Check Out: How to Choose Primer - http://goo.gl/JW7oUN Blending Silver Paint - http://goo.gl/fqMoe5 Refinish Network Auto Body Repair Video's have been created for both professional automotive painters seeking information and enthusiasts looking for how to paint a car yourself, carry out minor repairs and general interest in automotive repair and vehicle painting.





How to Polish a Black Car
http://www.refinishnetwork.com/car-painting-how-to/itemlist/tag/polishing The Products used in this Video are 3M Rubbing / Cutting Compound (step 1 on white pad) 3M Swirl Mark Remover (step 2 on black pad) 3M Ultrafina (step 3 on blue pad) This how to on polishing a black car can be applied to any color. This is a thorough polishing job that is most noticeable on a black or dark finish and illustrates all steps on how to polish. The 3m Polishing system is used in this video but many others are just as effective.





Car bumper repair, paint,mobile car repairs, in under 10 mins.
BMW rear bumper repair and paint in under 10 mins http://bumperrepairlondon.com/ www.smartenupcarrepairs.com





Best Paint Touch-up Tricks: Mercedes G55
This is one of the worst key scratches I have ever seen. This car needed to be repainted, but I thought I would give it a shot...nothing to lose. It covered 3 separate door panels with varying depth levels. 98% of the 9 feet was through the clear coat, paint, base, and into the substrate. EXTREMELY bad scratch. In this episode, I discuss multiple ways to approach this type of paint damage. I want to be crystal clear: THIS CAR NEEDED TO BE REPAINTED FOR 90-100% satisfaction. My techniques here, with the understanding of the customer, had the best-case final results of 70% to 75% "better or touched-up" appearance. See how it turned out. Thx for watching! -L





Car Damage Repair (Part 1)
Comments REQUIRE APPROVAL. THINK before posting. NOTE: I am NOT a Car Care Expert, nor claim to be. NOTE: This is =NOT= a Tutorial on how to repair a vehicle. It is a progress series. The Epic Tale, of fixing a car, after some dunce taxi driver hits it. Fortunately, the bumper, PHYSICALLY, is 100% undamaged! Cosmetically, it was a total mess. Before I started this video, I got half the "Darlington Stripes" off if it, and in this segment, I remove the rest of them. Some scratches remain, and there's some chipped off paint. Tocuh-up painting is in the next part. BEFORE SOMEONE SAYS IT: No, I do NOT have the time, or money, to go though the hassles of insurace companies, getting it appraised, quoted, and replacing the bumper. The damage is fairly neglegable, and when it's done, it'll not be perfect, but will look like other parts of the car. ALSO: Once all is done, the receipts for the materials will be sent to the cab company who was responsible. Fortunately, it's not going to be a major nightmare.





How to Fix a Scratch and Paint with Base / Clear
http://www.refinishnetwork.com/car-painting-how-to Visit http://www.refinishnetwork.com for more videos, repair article, auto body repair courses and auto body repair information. Join other auto body technicians and discuss car painting techniques with auto body professionals and enthusiasts. This shows a minor scrape on a Mazda Miata. The scratch was feathered out, primed and painted using BASF paint. There are many ways to get the job done, this is what was done here: 1. The scratch was feathered out using 280 grit paper until each color was seperated around 1/2". 2. Next it was backsanded to allow space for the primer to adhere. 3. It was primed with 2 coats of Glasurit 285-10/20 direct to metal urethane primer and allowed to dry. It was primed with a devilbiss finishline HVLP gun with a 1.6 tip. 4. Next it was blocksanded using 320 paper, then final sanded with some 400-500 grit paper. Using a block is optional there but recommended. 5. After taping it up it was painted using RM Diamont basecoat in 3 coats. Each coat was allowed to flash about 5 minutes before the next one. Then 15 minutes before clearing. An Iwata LPH400 was used to apply the basecoat at about 20 psi. 6. The clear coat used here was BASF DC5335 Glamour clear. It was applied in 2 coats with about 10 minutes between coats. It was applied using an Iwata W400 with about 26 PSI at the gauge. A few dirt nibs were colorsanded and polished afterwards.





How To Paint Your Car with Colour Matched Spray Cans
In this episode, Marty and MOOG show you how to paint parts using colour matched paint from a can. Stickers, DVDs, Hats & more here: http://www.mightycarmods.com/collections MCM Facebook: http://www.facebook.com/mightycarmods Forum: http://forums.mightycarmods.com More info on the paint we used in the video here: http://colorspec.com.au/





Professional results from a spray can. The right way
I showed you how to roll it on, now I show you how to spray it on. I'm not sure who did the music, as soon as I find out I will update this.





House Of Kolor - How To Paint A Car - John Kosmoski
These are clips from the full DVD of Kustom Painting Made Easy - By John Kosmoski of House of Kolor. The dvd is great and there is a ton of information in it. I have the full 1hour and a half dvd. Email me. 09-01-2014 abel_m_95076@yahoo.com





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

2002 Nissan Xterra : 14.400 @ 94.000
Denny Hansen, Engine: 3.3L, Supercharger: Factory Eaton M62


2008 Toyota Land Cruiser : 15.110 @ 94.050
NA, Engine: DOHC 32 valve V8,


19 Mazda 929 : 15.600 @ 120.000
Gargis, Engine: mazda 929 3.0L 18 valve, Supercharger: n/a Turbos: n/a Tires: 255/50/16


2005 Nissan Xterra S: 15.632 @ 87.710
Robert Curci, Engine: 4.0 All Aluminum DOHC 60V6 STOCK,


1968 Volvo DL 142: 17.600 @ 73.000
Kyle E., Engine: 1971 b20b 2.0l, Tires: 195/65/15 old Falkens


 


©2014 DragTimes - Disclaimer - Contact Us