Cruising with Andrew in my 500hp 323. Boost was reduced to 17psi, but was still a handfull. 2nd, 3rd & 4th gear bursts .210kph only about 1/2 way down the straight (track speed limits prevented full speed all the way). Great fun. This is a full street legal car. Taken by nokia 6610 phone.
Mazda R100 @ Powercruise Powerplay 2011
Sydney 4/12/2011. Cruising Eastern Creek in a genuine 10 second street car.
This car runs 98 pump fuel, 17psi and Water Injection. Its acceleration is
pretty brutal. lol
Sydney Powercruise #35 ~ insanegrunt.com
The Carline Mufflers Sydney Powercruise #35 held last weekend at Sydney's
Eastern Creek International Raceway, Powercruise 35 was a very wet affair.
Spectators braved the bad weather as over 900 entrants put on a wild show.
By: Blake Williamson
Come Together (Audio Jacked Remix)
The Glitch Mob - Fortune days
yoeys 1979 mazda rx323 12a rotary
12a bridge port, with racing beat ports, 48mm ida, gilmores, s4 gear box,
fresh rebuild 500k's, needs to b Dyno tuned.. pink stickerd due
to mirror tint's f.t.p, take them off and it will fly through vtnz =)
POWERCRUISE - BURNOUTS DRIFTING CRUISING SKIDS SIDEWAYS PART 2 FROM TURN 9 AT EASTERN CREEK RACEWAY
POWERCRUISE - BURNOUTS DRIFTING CRUISING SKIDS SIDEWAYS PART 2 FROM EASTERN
CREEK RACEWAY FILMED FROM TURN 9. ONCE THE WORD GOT AROUND WE WERE FILMING
THERE THE BOYS STARTED WITH THE SKIDS. WAS A GREAT SPOT. THANKS GUYS FOR
THE BURNOUTS. HOPE YOU ENJOY THE VIDEOS. SOME OF AUSTRALIAS TOUGHEST CARS
ALL TOGETHER IN ONE PLACE FOR POWERCRUISE.
Powercruise Sydney 2011 - March 3rd, 4th, 5th, 6th Eastern creek Raceway!
MORE VIDEOS TO COME
Part 12: 13B Rotary Engine Rebuild - My 76 Mazda RX-5 Cosmo Restoration
Just as I promised last episode, it is finally time to build the engine!
Part 12 of my RX-5 Cosmo restoration covers the entire process of building
the 6 port 13B Mazda rotary engine. While this engine is a hybrid of GSL-SE
RX-7 and Cosmo parts, the process is the same for any rotary from a 12A to
a 13B NA, 13B turbo, 13B-REW or any
other variant of the 13B. This video shows the whole process of the engine
build, starting from measuring the rotors and covering everything else
including clearancing the side seals, assembling the rotors, complete
assembly the short block, setting the eccentric shaft end play and
installing the front cover and everything underneath it. It's probably the
most complete engine build video outside of what you can buy from the
vendors, and as such, is an hour long. After this one, I'm going back to
videos under 20 minutes. But for now, grab a beverage of your choice, sit
back, and enjoy.