2002 Dodge Ram 1500 Engine Swap 4.7L Part 1 - EricTheCarGuy
Link to full version of this video:
Link to part 2: http://www.youtube.com/watch?v=QES-WrAB1NI
Visit me at: http://www.ericthecarguy.com/
This truck has been a challenge for me over the past couple of weeks as you
will seen in the video. The lesson here is do your best to check the
engine out before you install it and even that may not be enough. Be
careful when doing a job like this especially if you are by yourself as you
can get seriously injured if your not careful so work carefully and
methodically and things should work out fine.
The music is from the site
under "Royalty Free Music", it's title is "Merry Go-Distressed", the
producer of the site allows the use of this music as long as credit is
given, hence the credit given here. Thank you!
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
Visit EricTheCarGuy Forum
Visit my Facebook Page:
Be safe, have fun and stay dirty.
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee
against unauthorized modifications of this information, or improper use of
this information. EricTheCarGuy assumes no liability for property damage
or injury incurred as a result of any of the information contained in this
video. EricTheCarGuy recommends safe practices when working with power
tools, automotive lifts, lifting tools, jack stands, electrical equipment,
blunt instruments, chemicals, lubricants, or any other tools or equipment
seen or implied in this video. Due to factors beyond the control of
EricTheCarGuy, no information contained in this video shall create any
express or implied warranty or guarantee of any particular result. Any
injury, damage or loss that may result from improper use of these tools,
equipment, or the information contained in this video is the sole
responsibility of the user and not EricTheCarGuy.
2006 Dodge Ram 1500 Transformation
This summer I bought my first truck, a 2006 Dodge Ram 1500. This is just a
movie I made showing what my truck first looked like when I got it used
with about 95k miles, up until now with the extras I have added to it so
far. I am very proud of everything that I have done to it, and I owe my
buddy a big thank you for helping me with the various projects. It has 20"
Rockstar XD wheels, no lift (yet) and a 5.7L V8 HEMI engine, 2 Alpine type
R subwoofers w/ custom box, a 1800 watt Kenwood amp, a AirAid cold air
intake, and an Alpine head unit.
Song: Little bit of Life- Craig Morgan
Houtex Ryders Clifford Dodge Ram 28s
Houtex ryders/ssc member clifford showing off upgrades on the dodge ram.
lambos, jet doors, two 32 led screens in the tailgate n 50 plasma in the
bed, custom interior and on 28s.
2008 dodge RAM iPad install
This custom iPad install was done by shades suds & sounds. We are located
I'm temple hills Md. If you are interested in having an install like this
or any other type of installation done please send us a email.
Installerman85@yahoo.com or If you're interested in getting one of these
made go to the other page that was made for this and subscribe or inquire
there. This video was showing the test run on the very first one done. All
questions can be answered on that page.
2007 DODGE RAM 1500
POLK AUDIO MM'S FRONT SPEAKERS
POLK AUDIO 651'S REAR SPEAKERS
(2x) JL AUDIO 10W3v3 SUBS
CUSTOM MADE FOX ACCOUSTICS SUB BOX
JL AUDIO 1000/1D AMP (SUBS)
JL AUDIO 360/4 AMP (COMPONENTS)
HEAD UNIT: PIONEER AVH-P4400BH
WHEELS: 20in MAMBA M2'S
TIRES: 35in MICKEY THOMPSON BAJA MTZ'S MUD GRAPPLERS
K&N COLD AIR INTAKE
Head Hunter: Custom 2009 Dodge Ram
Quick video done for my buddy Robbie Bryant the day before he sold and
delivered the Head Hunter to it's new owner. This is a multiple show winner
and cover truck of Truckin' Magazine that was built for SEMA 2010 and was
there again in 2011.
Camera: Canon T3i
Lens: 18-55mm 3.5f
Equipment: Tripod, slider
Software: Final Cut Pro, Magic Bullet
Song: "Padawan" by Brownz
HEADHUNTER 2009 DODGE RAM - SICKKK BUILD!!!
A quick walkaround of the 2009 Dodge Ram "Headhunter" at Turkey Drag 2011
near Tyler, TX - 12/3/11.
Be sure to check us out on Facebook at Triple-X Motorsports & Outdoors for
all the latest updates!
Robbie wanted a big truck. To help him with that, the team at B&C Off Road,
in Pasadena, Texas, bolted on a massive 16-inch lift from 3rd Coast
Suspension. Much of the suspension was powdercoated green and black to
match the soon-to-be-sprayed custom paintjob. To give the Ram an even
higher stance, a 3-inch body lift was installed. Chrome Fox Racing shocks
do their best to damp the ride provided by Mickey Thompson tires mounted to
22x12 Fuel Off-Road Hostage wheels. Big 15-inch, six-piston brakes from
Baer do an incredible job of bringing the lifted beast to a screaming halt.
Powering the Dodge down Arkansas highways is a 5.7L Hemi with American
Racing Headers long-tube headers, 3-inch Borla Cat-Back Exhaust, Airaid intake, and a custom DiabloSport
tune created by AJ Berge of www.shophemi.com. All of that power is needed
to churn those massive tires, which is aided by an extended driveshaft and
Yukon 4.88 gears from Randy's Ring and Pinion.
Giant trucks are things of beauty, but no one is going to call this truck
beautiful. It is, however, one of the most highly detailed airbrushed
trucks we've ever seen. Ed Williamson (www.kustompaintbyed.com), is the man
responsible for the talent and brains behind the airbrush. The Wichita,
Kansas, native drove down to Arkansas and used PPG Lime Squeeze Metallic
and Brilliant Black Metallic paint from Patrick at NCS to create an
automotive work of art. Skulls, animal carcasses, and other rotting life
forms are all visible and provide an eerie feel that makes you want to
check your pulse just to be sure you're still alive. The graphics are
absolutely insane, and they are easily Robbie's favorite mod to the truck.
Ed even went as far as painting a custom front skidplate and the
B&C-modified driveshaft. A twin-scoop Suncoast Creations ram-air hood, Anzo
USA projector headlights, RBP grille and step bars, and a Westin lightbar
with off-road lights add to the Ram's impressive appearance.
Inside the doors, much of the plastics were smoothed and painted, which
gave Ed another canvas to airbrush skulls on. Two 12-inch Alpine subs are
housed in a custom fiberglass center console built by Kris Carroll of
California Customs, and two-tone brown and tan leather seats add to the
good looks of the Ram's interior. Keeping constant voltage for the audio is
a DC Power 280-amp alternator and Kinetik power cell. The factory dash was
modified with a molded DiabloSport Trinity tuner and the A/C knobs
relocated to the factory cup holder location. Functional as a daily driver,
yet completely custom, Robbie's modifications prove that an interior
doesn't have to be so over the top that it makes the truck a trailer queen.
Ed Williamson, from Kustom Paint by Ed, absolutely went off on Robbie's
sky-high Ram. Crazy looking skulls are everywhere and the details are
completely astounding. Winning Best Paint at several big shows, it's never
a surprise when the judges call his name.
dodge ram hemi swap!!!!!
This is a video of my 2002 dodge ram 1500. Its was a 3.7 v6 stock and i did
a swap to a HEMI 5.7 from a 2005 dodge ram 1500.
2005 Rumble Bee HEMI FOR SALE flemings ultimate garage
Talk about low production, this is #179, beautifully done by the factory,
HEMI V-8, overdrive automatic trans, of course HD posi rear, great looking
Rumble Bee yellow paint, matching black and yellow suede power seat
interior, power windows, locks, cruise, tilt wheel, custom Flowmaster dual
Exhaust, tonneau cover, front and rear
spoilers, 22" limited alloys w/ high speed radials, sliding rear window,
cold air intake, low miles, great cool truck you won't see everywhere.
1998 Dodge Ram 1500 Modifications
Here is a quick, improved, run down of all the mods I have done for my 1998
Dodge Ram pickup.
I've replaced all the interior lights with red LEDs. That includes my map
lights, dome light, ash tray, cup holder, and glove box.
I've recently took my old gauge face out and used nail polish remover and
QTips in order to take the green/blue color off so I could have a red gauge
face. It looks great at night!
I had a Kenwood KDC-X595 installed today along with new Memphis door
New LED tail lights w/ an LED reverse light has also been installed.
The 3rd brake light was installed today as well.
I'm more than happy to share any information with how this was done if
anyone is interested in doing this as well.
I'd like to thank www.superbrightleds.com for carrying all the LED lights
that I've used in my modifications.
2009 Dodge Ram 1500 Level Kit Install
2009 Dodge Ram 1500 2.5 Level Kit Install by Top Gun Customz, this ended up
taking me an hour and a half and I was jsut using hand tools no air tools.
Easy to instal anyone with the tools and able to follow instructions could