Suction From The Induction!

My mates Vauxhall Corsas induction kit sucking in anything from hands to camera straps!

More Videos...


Much wind from a small turbocharger
Here You can get an idea of how much air is blown through a charger of an old truck.





Quick Tip-Throttle Cleaning - EricTheCarGuy
This one goes out to BowlingBallOut who posted a question about a sticky throttle on his Saturn. It was a great question so I decided to make this video in response to it. There are many different configurations of throttle assemblies but for the most part if you have a throttle that is sticking you might be able to fix it using the procedures in this video. I am aware you may not able to purchase spray throttle cleaner in some states now but I'm sure they have some alternative available at your local parts store. One very important note here is that if you have a drive by wire throttle (DBW), then I do NOT recommend this procedure. If you perform this procedure on a DBW throttle body you may need to have the throttle reset in order to get your engine to idle or even start. I only recommend this procedure if you're trying to correct a problem with a sticking throttle. If you have idle problems, I recommend you check out this article on my website. http://www.ericthecarguy.com/faq/solving-automotive-idle-problems The best place for answers to your automotive questions: http://www.ericthecarguy.com BowlingBalOutl's channel http://www.youtube.com/user/bowlingballout Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





1968 Dodge Charger at the SEMA Show 2011





RYNO Motors Full Story
This is a great story on the early days of RYNO Motors. See our latest creation pre-production show bike at our web-site and pre-order at http://rynomotors.com/store and don't forget to buy a Tee Shirt: http://rynomotors.com/ryno-tee-shirts/




Follow