YAMAHA R6 2007 LEDS EN RINES
CHEQUEN LOS OTROS DOS VIDEOS QUE ACABO DE SUBIR, YA CON TODA LA ILUMINACION
EN SU SITIO SALUDOS A MIS SOBRINOS, PEDRO , JUAN Y SEBAS, POCO A POQUITO VA
QUEDANDO LA MOTO DE SU JEFE.
StrobeWise™ Review - Motorcycle Install & Demo of Rear End Collision Avoidance Device
The Two Wheels 2 Anywhere Crew install and review the new cutting edge
motorcycle safety device, StrobeWise™ by TransSystems. The Team install
and review the new rear mounted strobe light device on Rich's Suzuki DL1000
V-Strom. Mad Mike the TW2A product pitchman explains how the device works
with an animated sales pitch. Ken Lem the teams mechanic installs the
device and later the team road test the device. The StrobeWise™
deceleration warning device can be installed on almost all modern
motorcycles. It monitors motorcycle speed and acceleration more than 1000
times per second. When the StrobeWise microprocessors senses deceleration,
it alerts following drivers using an ultra-bright amber LED, giving them 1
to 10 seconds of additional reaction time, avoiding the potential for
dangerous rear-end collision.
The NTSB has determined that if following drivers had just 0.5 to 1.0
second of additional warning time, 60% to 90% of rear end collisions could
be avoided. The StrobeWise™, which can be easily mounted on to the rear
of any motorcycle, was developed by father and Son team, Fritz and Beau
For more information on StrobeWise™ visit: www.tw2a.com/products
How To Install An LED Brake Light On A Motorcycle
Here's how to install an LED brake light bulb on a motorcycle. See all my
motorcycles at http://hoohoohoblin.com/ The taillight on my Buell Cyclone
stopped working, so I decided to replace the bulb with an LED brake light
bulb, # 1157. The Buell only has one tail light bulb, so if it burns out,
I'm invisible from behind in the dark. I decided to replace the
incandescent bulb with an LED bulb because LED light bulbs are much more
shock resistant and less likely to malfunction. They're affordable now
too. I paid $16.99 for a set of two at an auto parts store. They used to
be really expensive. In this video I also show how my Harley Davidson FXR
was converted so that the rear turn signals are also running lights. This
is a worthwhile conversion, as it makes the motorcycle much more visible at
night, and you are still visible if one or 2 other bulbs burn out. To do
it, you need to wire up the back turn signals with 1157 bulbs. You can do
this by installing front turn signals on the back. The front turn signals
are also running lights. I'm not sure if it is officially legal to have
your rear turn signals converted to running lights, but I've never had a
problem. Safer is better.
LEDGlow's Advanced Million Color Motorcycle Lighting Kit
LEDGlow's Advanced Million Color Motorcycle LED Light Kit features
ultra-bright, surface mounted RGB LED technology that will give any bike a
custom, head turning look. The featured SMD LEDs are so incredible that
even when looking directly at them, you cannot see the three separate LEDs
used to make each individual solid color. This allows all the included
color modes to be extremely bright and vibrant. The included slim and easy
to hide control box features 15 dynamic solid color modes, 2 color cycle
modes, 3 flashing modes, and 1 fading mode all of which are easily cycled
through by using the included wireless remote. Each motorcycle lighting
strip is completely flexible, features 5 feet of power wire, and with the
included 3M tape you can bend and curve each strip for maximum mounting
capabilities. LEDGlow's LED lights for motorcycles include a one year
limited warranty and free lifetime technical support.
For More Information Visit:
Motorcycle LED indicators FIXED!
At last! After much cursing and swearing ... SUCCESS!
#2 - Most Discussed (This Week) - Autos & Vehicles - New Zealand
#6 - Most Discussed (This Month) - Autos & Vehicles - New Zealand
#9 - Top Rated (This Week) - Autos & Vehicles - New Zealand
#21 - Top Rated (This Month) - Autos & Vehicles - New Zealand
EPIC DRIFTING FAIL COMPILATION!! # 2013
The first part of the drifting fails. Hope you guys enjoy!
So make sure you hit that subscribe button to never miss a video! Why not?
If your Video is in this Compilation please contact me to be credited for
it or have your part removed, thank you.
09 Ninja 250R Green Underglow
09 Ninja 250R Green Underglow
This is the kit i used very easy install took about 90min
How to Install a 03-06 cbr 600rr integrated tail light on a 2007 Cbr 600rr
Volar motorsports Integrated Tail Light for 03-06 Honda Cbr 600rr and
04-07 Cbr 1000rr.
Sku # TL016-Smoke
This Flush mount modification will give a better look to your CBR and get
rid of the 2007 ugly stock fender / tail light.
Very nice Weld finish and very bright LED a very good deal !
I hope this video will help feel free to leave your advice.
This is my first DIY well inspired by others so thanks to them.
How to Install Resistors for LED Turn Signals, Fix Hyperblinking!
RESISTOR KIT HERE: http://bit.ly/1b4x536
This video demonstrates how to install standard LED resistors in order to
slow down LED turn signals. Resistors and LED bulbs available from Diode
Dynamics! Give us a call with any questions 314-205-3033 or email
I know all of you master electricians might say otherwise, but quick
splices are very good for the purposes here. Please don't tell people to
solder- if you do not have proper tools and experience, you will do a very
poor job and it will simply crack and break within weeks of installation.