Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

BMW E46 with Sebring Exhaust

Start up of my E46 320i with newly installed Sebring Exhaust.


 


More Videos...


BMW Crash Compilation #1
Rate, Share and Subscribe ! Like us on Facebook: http://www.facebook.com/topcrashes Car Crash Community: http://gplus.to/carcrashes Follow on Twitter: https://twitter.com/CarCrashWorld





Cool Secret Tips And Tricks About Your E46
A few tips and tricks that you may perform on your e46.





Top 10 BMW Fails Compilation 2013
Top 10 BMW Fails Compilation 2013 SUPPORT THE ORIGINAL VIDEOS: Fail compilation Video -BMW Drift Fail https://www.youtube.com/watch?v=f6taF5W9vPA Female, BMW and snow - a terrible combination https://www.youtube.com/watch?v=cWWwzov2b2c Idiot with a BMW https://www.youtube.com/watch?v=YDaHA39EwhQ Besoffener Idiot - BMW Syndikat Asphaltfieber 2011 https://www.youtube.com/watch?v=QXDeN66mGcs BMW Clutch Fail! https://www.youtube.com/watch?v=87HzYTPfi2M Bmw M6 Fail https://www.youtube.com/watch?v=87HzYTPfi2M BMW X5 crash at parking https://www.youtube.com/watch?v=3KZRa3sYD-I Fail drift on BMW E30 https://www.youtube.com/watch?v=KaB7DRBTy74 BMW drift failed auto crash 2012 https://www.youtube.com/watch?v=UhhiyWShYNQ BMW 740i FAIL https://www.youtube.com/watch?v=JwsI3_7q4JM bmw s1000rr , bmw 2013, bmw grip, bmw x6 BMW Drift Fail, Idiots with BMW, BMW Clutch FAIL, BMW CRASH, BMW BURNOUT, BMW COMPILATION, FUNNY BMW FAILS, PARKING CRASH, BMW M6, BMW X5, BMW E30, BMW 740i, BMW IN WATER





BMW X6 против Нивы 3D на бездорожье
Эта Нива против Mercedes G55AMG http://www.youtube.com/watch?v=qqLS2cSdsow http://vk.com/antonavtoman Добавляйтесь в друзья!) http://www.facebook.com/anton.vorotnikov





BMW Car Crash Compilation
Only BMW accident. All Compilation on a Specific Topic. Be careful and polite on the road. Drive safely and keep yourself and others safe.





BMW all Series - Crash Test 2013
► SUBSCRIBE NOW : Subscribe : http://www.youtube.com/user/Auto1News?sub_confirmation=1





BMW M4 vs. Audi RS 5
Wenn Gummi in dicken Wolken verdampft, ist Showtime. Der neue BMW M4 trifft auf den Audi RS 5. AUTO BILD hat den 450 PS starken RS 5 und den M4 mit 431 PS verglichen.





BMW 320i e46 0-Vmax Acceleration
The FULL acceleration test of the stock BMW 320i e46 150 ps М52TUB20 engine 2000 year (winter tires) Video contains: 0-Vmax run ( sorry for the ML 350 sound on the background and for the open window also ) 0-150 run ( without any strange sounds, only straight-six engine of the 320i ) 2rd, 3rd, 4th, 5th gear pulls from low RPMs ( Dual vanos test ) Results: The max speed is declared 219 km/h ( +-3 km/h the speedos error ) 0-200 km/h in 40 seconds (by speedometer) 0-100 is about 8.8 seconds (by speedo also) Dual vanos is pretty powerful in a low RPMs HD video was shot on the Galaxy S4





BMW M5 Street Drift! Giorgi Tevzadze(NeedForDrive.com) & Eric Davidovich(Smotra.ru) by zaRRubin
Georgian Adventure Giorgi Tevzadze - BMW M5(OOM-500) & White BMW 3-Series(V8, 4.4) Goga Toloraia - BMW M5(Red, TOL-600) All music 1. Method Man - Release Yo' Delf (The Prodigy Mix) 2. Shahmen - Mark (low bass) 3. The Go! Team - Apollo Throwdown (Star Slinger Remix) 4. Depth Charge - Sex, Sluts & Heaven (bordello mix) 5. Swollen Members - Reclaim The Throne 6. Delinquent Habits -- Return Of The Tres 7. Shahmen - Van Gogh's Crows 8. I Monster - Dayderam In Blue





My BMW Remote iPhone App Walkthrough
Are you wondering how the My BMW Remote iPhone app works for your BMW? Check out a walkthrough video showing how the app works for a 2012 BMW 3 Series 328i.





2005 BMW E46 3-Series Control Arm Replacement
Click here for products featured in this video: http://www.apdty.com/searchitem.epc?lookfor=631020,631031,016912 In this video we'll show you how to replace the control arms and bushings in a BMW E46. This job is also similar to other cars in the 3-series lineup, including the E36.





17 Year Old Driver Flips BMW
Driver loses traction going downhill, over corrects, rides the berm a ways before flipping his car. The BMW 2002 was a project car he restored with his father. Driver was uninjured. Video was posted previously on Facebook but unlisted on Youtube. Thanks for Watching





Part 2: Installing shocks, struts and springs on a BMW 3 series 99 thru 05 (E46)
BLOG ARTICLE: http://blog.bavauto.com/14307 "Like" us on Facebook - http://www.facebook.com/BavarianAutosport "Follow" us on Twitter - http://www.twitter.com/BavAuto "Subscribe" to us on YouTube - http://www.youtube.com/BavarianAuto Visit our online store - http://www.bavauto.com/ All of the items shown in these videos are available in our online store at http://www.bavauto.com/. Need additional tech help? Please visit our tech blog for thousands of Tech and DIY BMW and MINI articles at: http://blog.bavauto.com/ --- In Part-2 of this two part series, we will replace the rear shock and spring. See Part- for the front shock/spring/strut replacement. The Bentley repair manuals will cover standard shock and spring replacement for the various BMW and MINI models. This DIY will assume that the DIYer has the applicable Bentley manual for additional reference as well as fastener torque values. Note that we will be installing the Bilstein PSS-10 coil-over kit. However, the procedures would be the same for any common shock/strut replacement (including installing sport springs, if desired). PARTS USED: • New shocks/struts (Bilstein, Koni, Sachs, etc.) • New sport or stock replacement springs, if desired (BMW, BavAuto, Eibach, etc.) • New Shock install kits (compression bumpers, dust shields, spring pads, etc.) • New upper strut and shock mounts • New strut & shock mount gaskets (as required) • Rear shock mount reinforcing plates TOOLS USED: • Bentley Repair Manual • BavAuto Non-Marring pry bar set • 13mm through 18mm ½"drive socket & ratchet set with various extensions • 4mm through 8mm Allen keys or bits (for ratchet use) • 13mm through 18mm combination wrench set • Assorted flat and Phillips screwdrivers PROCEDURE: REAR (applies directly to the E46 3-series, but the E36 3-series uses the same steps and procedures): 1) Safely raise the rear of car, with suspension hanging. 2) Remove the wheels. 3) Place a jack under the lower shock mount eye or the wheel hub assembly. Slightly raise the suspension (just enough to remove the downward tension on the shock). 4) Remove the lower shock mount bolt. 5) Lower the jack and allow the suspension to hang free. 6) Remove the trunk side trim panel to access the upper shock mount. 7) Remove the two 13mm nuts from the upper shock mount, at the top of the shock tower. 8) Lower the shock out of the vehicle. 9) Assemble the new shock with new compression bumper, dust tube and upper mount. Be sure to re-use the large lower and upper washers for the upper mount. These washers must cup away from the mount. lower washer cups downward and upper washer cups upward. 10) If the spring is being replaced, it can be removed BEFORE re-installing the shock. Have a helper pull downward on the wheel hub assembly and pull the spring out from between the chassis and the upper control arm. 11) Using new upper and lower spring pads, install the new spring in the same manner as the original was removed. Install the new spring pads, then install the spring. 12) Install the new shock. Place a new shock mount gasket on the shock mount and insert the assembly up into the shock tower. If installing a shock mount reinforcement plate, place the plate over the two shock mount studs, on top of the shock tower, before installing the two nuts. Install the two nuts. Install the trunk trim panel. 13) Install the lower shock mount bolt. Be sure to install the washer on the bolt before installing the bolt. Use the jack to raise the suspension assembly to align the lower shock mount with the hub mounting point, so the bolt can be inserted and threaded. Tighten the bolt. 14) Repeat for the other side. -------- All products noted in this video can be purchased in our online store, http://www.bavauto.com/, 24 hours a day, 7 days a week. You are also welcome to e-mail us at info@bavauto.com or call into our headquarters and speak to our knowledgeable advisors at (800) 535-2002 (Mon.-Thurs. 8AM to 9PM EST, Fri. 8AM to 7PM EST, and Sat. 9AM to 4PM EST).





BMW E46 330CI Schmiedmann Competition
This shows the BMW E46 330CI Schmiedmann Competition with ESS compressor in action!! See more about the build here http://www.schmiedmann.dk/static/Html/Danish/styling/10-03-10-BMW-E46-330CI -carbon-ESS-kompressor/index.htm All parts mounted on the BMW can be found here http://www.schmiedmann.com





Part 1: Installing shocks, struts and springs on a BMW 3 series 99 thru 05 (E46)
BLOG ARTICLE: http://blog.bavauto.com/14307 "Like" us on Facebook - http://www.facebook.com/BavarianAutosport "Follow" us on Twitter - http://www.twitter.com/BavAuto "Subscribe" to us on YouTube - http://www.youtube.com/BavarianAuto Visit our online store - http://www.bavauto.com/ All of the items shown in these videos are available in our online store at http://www.bavauto.com/. Need additional tech help? Please visit our tech blog for thousands of Tech and DIY BMW and MINI articles at: http://blog.bavauto.com/ --- In Part-1 of this two part series, we will replace the front shock/strut/spring assembly. See Part-2 for the rear shock and spring replacement. The Bentley repair manuals will cover standard shock and spring replacement for the various BMW and MINI models. This DIY will assume that the DIYer has the applicable Bentley manual for additional reference as well as fastener torque values. Note that we will be installing the Bilstein PSS-10 coil-over kit. However, the procedures would be the same for any common shock/strut replacement (including installing sport springs, if desired). PARTS USED: • New shocks/struts (Bilstein, Koni, Sachs, etc.) • New sport or stock replacement springs, if desired (BMW, BavAuto, Eibach, etc.) • New Shock install kits (compression bumpers, dust shields, spring pads, etc.) • New upper strut and shock mounts • New strut & shock mount gaskets (as required) • Rear shock mount reinforcing plates TOOLS USED: • Bentley Repair Manual • BavAuto Non-Marring pry bar set * BavAuto spring compressor tool • 13mm through 18mm ½"drive socket & ratchet set with various extensions • 4mm through 8mm Allen keys or bits (for ratchet use) • 13mm through 18mm combination wrench set • Assorted flat and Phillips screwdrivers PROCEDURE: FRONT (applies directly to the E46 3-series, but others are similar): 1) Safely raise the front of car, with suspension hanging. 2) Remove the wheels. 3) Disconnect the upper end of the swaybar link from the shock/strut bracket. Note that the through-stud for the link's upper joint (as well as the lower) must be secured using a 16mm to 18mm thin open end wrench. This particular link is 16mm. 4) Remove the strut mounting pinch-bolt. The bolt goes through the strut mounting clamp on the wheel hub/spindle assembly and has a nut on the opposite side (some models do not use nuts, the bolt threads into the clamp). 5) Set the mounting bracket for the ABS sensor wire, brake pad wear sensor wire (left side only) and brake fluid hose aside. Note that other models may have these hoses mounted in a bracket that is affixed to the shock/strut housing. In these cases, remove the wires and hose from the bracket. 6) If the vehicle has adaptive headlights (self-aiming), disconnect the sensor link from the control arm or the sensor bell-crank arm. The sensors may only be present on one side of the vehicle. 7) Place a support or jack under the lower control arm to support the suspension as the upper strut mount nuts are removed. 8) Remove the three 13mm nuts that secure the upper mount to the body (strut tower), under the hood. 9) Gently lower the jack or support, from step-6, and lower the strut assembly. Pull the strut assembly up and out of the hub/spindle. A helper may need to push down on the hub/spindle as you pull the strut upward. If the clamp is too tight for the strut to pull out, use a cold-chisel or large flat-blade screwdriver as a wedge to open the clamp a bit. Tap the wedge into the split in the clamp, widening the clamp, allowing the strut to be removed. 10) Once removed from the hub/spindle clamp, remove the strut assembly from the wheel well area. 11) Install a spring compressor to the spring on the strut assembly. Compress the spring until you can tell that the spring pressure is relieved from the upper and lower spring seats. 10) Remove the upper shock/strut nut that is at the top of the assembly, in the center of the upper mount. To remove the nut, you can use the method shown in the Spring 2007 issue of our Fast Times newsletter, page-7, or you can use an impact gun. DO NOT use an impact gun for re-assembly! 11) Once the nut is removed, disassemble the upper mount, upper spring perch and washers from the shock's piston rod. Keep track of the various washers and their locations. 12) Pull the spring (and compressor) off of the shock/strut. 13) Assemble the new shock/strut and/or spring. 14) We're sorry, but the description can not be any longer (youtube requirement). Watch the video and see our tech blog for the full DIY steps at http://blog.bavauto.com/ -------- All products noted in this video can be purchased in our online store, http://www.bavauto.com/, 24 hours a day, 7 days a week. e-mail us at info@bavauto.com or call our headquarters and speak to our knowledgeable advisors at (800) 535-2002 (Mon.-Thurs. 8AM to 9PM EST, Fri. 8AM to 7PM EST, and Sat. 9AM to 4PM EST).




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

2007 Chrysler Sebring Limited: 15.310 @ 92.020
NA,


1995 Chrysler Sebring LX: 15.480 @ 89.430
Bob, Engine: 2.0 liter, Supercharger: na Turbos: na Tires: kumho supra ecsta 711


2004 Chrysler Sebring : 15.835 @ 87.860
KEVIN, Engine: 2.4L,


2004 Chrysler Sebring Convertible Touring: 16.700 @ 83.300
NA,


1997 Chrysler Sebring JX: 16.800 @ 83.000
Joe, Engine: 3.0,


2001 Chrysler Sebring Convertible LXi: 16.830 @ 82.890
Wayne Dennis, Engine: 2.7 L V6,


2007 Chrysler Sebring Touring: 17.310 @ 82.010
NA,


2008 Chrysler Sebring Touring Convertible: 17.310 @ 82.030
NA,


 


©2014 DragTimes - Disclaimer