Caterpillar Genset D399 V16 Cat diesel

Caterpillar D399, 208 volt, 3 phase gen set where I work. 30+ years old. 60Hz at 1200 RPM, so doesn't hurt so bad to be in the room with it.

More Videos...

Caterpillar 3516 Marine Engine
Engine : Manufacturer : Caterpillar Engine Model : 3516 Engine S/N : 72Z00587 Manufacture Date : 2006 HP : 1645 Hp Governor : Mechanical governor Starter : Electric starter

Caterpillar 3516 Test Run - IMP Corporation Item# 6497
(2) Two Caterpillar 3516 Industrial Generator Sets. 1500kw standby, 1250kw prime, 1978hp, 2400/4160v, 1800rpm, 60hz. Approximately 2300 hours since new on each unit. Convertible to 1250kva prime, 50hz, 1500rpm, 3300v. Serial number is 25Z00517. Engine arrangement# 8N0462. 3 phase, 248 amps, generator end arrangement# A226090002, generator end serial number 90762-4, 6 lead non reconnectable. Air cleaner, block heater, std generator and engine panel, new engine mount radiator, skid mounted. Genset dimensions are 202"l x 68"w x 85"h, approximate weight 40,000 lbs.

Caterpillar D9G donkey start and unloading off a low loader
Caterpillar D9 G Unloading off a low loader. Check out our website for more videos, pictures, forum and blog.

Vintage 1940 Cat Caterpillar D13000 Generator built for the U. S. Navy, 9200lbs.
Genset weighs 9200lbs, built march 1940 for the Navy, shipped to Torpedo Station, Goat Island, Newport, Rhode Island as backup electric power at the Navy torpedo factory and research center. Its 230 volt, 3 Ph., 66kw. The engine is the same as a Cat D8 tractor at that time. This one is rated 120 hp @ 921rpm. Its got original Cat, Navy Board Of Ordnance and Torpedo Station I.D. tags. It shows 8600 hours and I don't think its ever been overhauled. It's has about 15 parts that were chrome plated by its Navel caretakers back in the day. I hauled it out to power wash it and paint "Navy Gray and make Under Way." thanks 4 looking.