Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Automatic Transmission Valve Body Teardown - 4L60E Shift Kit

Click here to purchase the GM 4L60E DVD http://store.boxwrench.net/GM-4L60E-Transmission-Rebuild-DVD_p_32.html GM 4L60E Transmission Rebuild DVD: Valve Body - Teardown Working thru the valve body webbing, Rick goes over a proper tear down of the valve body, including the forward accumulator and solenoids. This is key to preparing for the repair or adding a shift kit to your 4L60E Transmission. BoxWrench.net is a community and resource designed for automotive enthusiasts. Get the full DVD with all of the sections here... http://store.boxwrench.net/GM-4L60E-Transmission-Rebuild-DVD_p_32.html Get our full "Basic Engine Building" DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench Store: http://store.boxwrench.net/ BoxWrench on Facebook: http://www.facebook.com/boxwrench


 


More Videos...


Engine Building Video - Piston Removal - Chevy V8 Small Block
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 17: Pistons By this section you'll be ready to remove the pistons, starting with the rod caps. You'll also get to see the crankshaft, rod bearings and journals for the first time and inspect them for damage as they come out. Great tips on protecting the cylinder bore while removing the pistons and connecting rods. We don't recommend using a ridge reamer to make this easier. As your block will need to go the a machine shop anyway. They are likely to damage your cylinder walls and are hard to use. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and Boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html New Transmission DVDs and a Differential Rebuilding DVD just added. http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrench





Double Pumper Carburetor Video - Holley Install & Tuning DVD
Buy the "Holley Installation & Tuning" DVD http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html This is an animated tour of the Holley 4150 Mechanical Secondary "Double Pumper" carburetor. We'll guarantee you've never seen your carb in this way before. You can't learn the inside of your carb any better than how this DVD will show you. If you buy a brand new Holley 4-barrel, this DVD now comes in the box with every purchase. If you already own a Holley carburetor or would like to learn about the internals of the all-time, most popular modular style carburetor, this is the DVD for you. It's the ultimate installation, tuning and troubleshooting guide for the Holley modular style carburetor. This disc will also help tune and troubleshoot any other brand of modular style and some one-piece style carburetors. Menus are full of bonus information and detailed animated tours of carburetor internals and accessory kits. Get the full DVD with all of the interactive menus, detailed animated tours of internals and accessory kits here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html Don't forget our Basic Engine Building DVD. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and Boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Sample clips on our YouTube page and at our store here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html BoxWrench.net is a community and resource designed for automotive enthusiasts. New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench Store: http://store.boxwrench.net/ BoxWrench on Facebook: http://www.facebook.com/boxwrench





Engine Ignition: Wiring Distributor & Spark Plugs Video- DVD
Click to buy a "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html http://store.boxwrench.net/Basic-Engine-Building_c_35.html Basic Engine Building DVD - Chapter 53: Ignition The second part of the "Ignition" section shows you how to find the initial timing of your engine, with or with out a top dead center whistle. You need to know your firing order and distributor rotation direction. Then we'll show you how to set the distributor cap right, using the #1 cylinder in your firing order. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and Boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html BoxWrench on Facebook: http://www.facebook.com/boxwrench





Cylinder Bore Honing - Engine Building Video - Hone Piston Wall
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 28: Honing And finally we come to the main part of the machine shops job, honing the cylinder walls. It will do two things. First it will bring the cylinder walls to the matching diameter of the new pistons. Second it will leave a cross hatch pattern of light scratches, to keep oil on the walls and prevent metal on metal scraping. A dial bore gauge is used to bring it to the exact spec needed within 1/10,000th of an inch. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and Boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrench





Transmission Repair - GM 4L60-E Transmission Re-Assembly (Rebuild)
On this video we go through the re assembly of a 4L60E Transmission. I tried to make this video shorter for you so I skipped the bushing installation and installing the bolts on the valve body. But you can go to the teardown video for reference on where each bolt goes, since they're different sizes. I will make a follow up video on bushing installation.





Transmission Repair - Transmission Solenoid Testing (Ohms Law)
Transmission Solenoid Testing. Here I use Ohms Law for testing. I believe that this is the only way to test your solenoids on or off the vehicle. Remember that the solenoids fail under LOAD! So just Ohm testing on its own is not really accurate. Other tests can be done, but if you just own a VoltOhmeter, that should be all you would need to perform your testing. Voltage drop testing is also accurate but you also need to put your component under load. Ohms Law, Learn it, make it your own. Voltage Divided by Ohms equals Amps...





4L60E Transmission - Valve Body Installation
I have a complete rebuild of one o this units, but I think is a little vauge since I explain to refer to the teardown video to do the "Reverse of Removal" which is not always plausible. So here I make this video to supplement on the assembly video and the teardown as well.





Transmission Repair - 4L60E Transmission Teardown Inspection
On this video we can see the disassembly of a 2006 4L60E transmission. The most common failure on these units is 3rd. clutch burn up, the reaction sun shell and the 2-4 band. Failure on these transmissions is not necessary the way it is treated, rather is these common or pattern failures. Valve body ware is also another issue and can be corrected installing a correction kit of your choice.





4L60E Transmission Valve Body fix P1870 Transmission Component Slipping trouble code.
This is a small clip from a full rebuild video showing you what to look for and attend to in the rebuilding process of a 4L60E Transmission.





4L60E Rebuild Part 2
Part 2 of the rebuild process. We find the problem clutch, and install new ones.





BMW ZF5HP24 Valve Body Installation- IPT Transmissions
John Lombardo of IPT Performance Transmissions shows how to install a valve body in a BMW ZF5HP24 transmission





Transmission Repair - 4L80E Transmission Teardown Inspection
Here we see a 2006 4L80E Transmission being inspected. Verified the customers complaint and was a slipping 2nd at hard acceleration. We confirmed it with the intermediate sprag assembly outer race being pitted and a worn sprag.





4L60E 1-2 SHIFT SOLENOID
THIS IS A VIDEO THAT I PUT TOGETHER to show people how easy LOL it is to replace the 1-2 shift Solenoid. Thanks to Yayington http://www.youtube.com/watch?v=OGckmJK2rNQ this was relativley easy to do took 3 hours total and it fixed my issues.





How to adjust bands and change automatic transmission fluid
This is a demonstration of how I tightened the bands of my automatic transmission and changed the transmission fluid and filter. The vehicle is a 1998 Dodge Ram 1500 4X4 with a 46RE transmission. This repair was done after a transfer case repair which required removal of the propeller shafts. With the front shaft out of the way, access to the front band adjustment screw was better than normal. It is possible to do this with the shaft in place, but access for demonstration is not as good. For details of how the propeller shaft is removed, see my other videos on repairing a Dodge transfer case oil leak. Note that the details of how this is done, especially the torque settings and the number of rotations backward after ideal torque, are very specific to the 46RE transmission. Be sure the locknut is backed off enough that it doesn't bottom out when the adjustment screw is tightened. Before ever doing this type of procedure yourself, you should consult the dealers repair manual and verify the specific procedure in your car. This is an amateur demonstration done for entertainment purposes only. The information offered here is given in good faith but with no guarantees of accuracy or safety. Any misadventure you encounter if you decide to do maintenance on your own vehicle is your responsibility. Short clip of music midway through is royalty free music "The Messenger", from Youtube creation tools, author unknown. Thunderclap sound used under Creative Commons 3.0 license, done by RHumphries at http://freesound.org/people/RHumphries/





Transmission Pressure Control Solenoid (PCS)
GET SOFTWARE http://www.autodiagnosticsandpublishing.com/Software_Catalog.html http://www.autodiagnosticsandpublishing.com/TransDoctor_Auto_Transmission_S oftware.html Transmission Pressure Control Solenoid (PCS) Explains the Transmission Pressure solenoid testing. (note: the following is NOT a sales pitch. We allow all schools and training institutions to use our software free of charge, so long as it is not sold to others. You're encouraged to download our free automotive simulation software for more information. *************************************************************************** *********** Amazon Printed-Books & Kindle: http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Dstripbooks&fiel d-keywords=mandy+concepcion Google Play Android APPs: https://play.google.com/store/search?q=mandy+concepcion&c=apps Amazon Video DVDs: http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Dmovies-tv&field -keywords=mandy+concepcion




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

1995 Nissan Maxima GXE Nitrous Auto: 10.851 @ 125.550
Jim Edwards, Engine: 3.5 2002 engine swap, Tires: M/T 22x8x15


1949 Cadillac De Ville : 11.000 @ 115.000
bill burns, Engine: 500cuin caddy, Tires: phoenix slicks


1949 Cadillac De Ville Coupe: 11.450 @ 118.000
bill burns, Engine: cadillac 500,


1998 Nissan Maxima GXE Turbo: 11.495 @ 126.780
Matt P, Engine: VQ35, Turbos: TurboneticsT66 Tires: MT ET 26x10


1999 Nissan Maxima SE TURBO: 11.556 @ 120.130
Robert Tilley, Engine: VQ35de, Turbos: 67trim t3 stage 5


1996 Nissan Maxima SE Vortech Supercharger: 11.690 @ 120.490
Matt, Engine: VQ35DE, Supercharger: vortech


1999 Nissan Maxima se Turbo: 11.745 @ 117.160
Robert Tilley, Engine: VQ35, Turbos: To4r 67trim stage 5 t3 exhaust Tires: 26X9.5X16 hoosiers


1995 Nissan Maxima SE Turbo: 11.761 @ 121.300
Neal Clary, Engine: stock VQ30, Turbos: T61-Ptrim .82A/R Tires: 26x10.5-15 MT ET Street


1992 Nissan Maxima SE Auto ALL MOTOR: 12.058 @ 114.520
Aaron Kimball - NWP Engineering, Engine: VQ35DE Swap, Tires: MT Slicks 22 inch


2002 Nissan Maxima SE Nitrous Auto: 12.190 @ 111.820
Jim Edwards, Engine: 3.5L, Tires: M/T 22x8x15


1995 Nissan Maxima GXE N/A Auto: 12.346 @ 112.990
Jim Edwards, Engine: 3.5L, Tires: M&H 23x7.5x15


1978 Cadillac De Ville coupe: 12.390 @ 109.100
L Kern, Engine: 472, Tires: Good year rear VW165 front


1998 Nissan Maxima SE: 12.610 @ 108.980
DandyMax, Engine: VQ30DEK (3L), Tires: M&H slicks


2004 Nissan Maxima SE Zex Nitrous: 12.801 @ 106.590
Kevin Crawford, Engine: 3.5L V6, Tires: Nitto 555R Drag Radials up front


1998 Nissan Maxima SE: 12.830 @ 106.900
DandyMax, Engine: VQ30DEK (3L), Tires: M&H slicks


2002 Nissan Maxima SE: 12.859 @ 108.000
Matthew Williams, Engine: VQ35DE, Supercharger: NA Turbos: Naturally Aspirated


1992 Nissan Maxima SE Automatic: 12.896 @ 104.559
Aaron Kimball, Engine: stock 3L DOHC 24V VE30DE, Supercharger: NA Turbos: NA Tires: 22x8x15 Mickey Thompson Slicks


1998 Nissan Maxima SE: 13.000 @ 104.380
DandyMax, Engine: VQ30DE w/ DEK manifold swap, Tires: M&H 24.5x15x8.5 slicks


2001 Nissan Maxima GXE: 13.275 @ 110.640
Bryan Kirkpatrick, Engine: 3.0L DOHC V6 Model: VQ30DE-K, Turbos: Turbonetics T3/T04E Tires: Dayton Daytona HR 215/60 15's


2002 Nissan Maxima SE N\A Auto: 13.325 @ 102.660
Jim Edwards, Engine: 3.5L, Tires: M/T 22x8x15


 


©2014 DragTimes - Disclaimer