0-60 and top speed cummins 12v
People seem to be wondering where my gauges are and how fast they go up so
here you go. 1997 2500 cummins 12v #100 plate full forward, no AFC,16*
timing, 5" with see through muffler.
Cold Start Cummins 5* below
24v cummins sled puller. Custom ground haisley cam, 200 hp ddp injectors
64/71/14 turbo, port and polished head,
fly cut pistons, quadzilla adrenaline stacked with a smarty.
12 valve Dodge Cummins 4000 rpm rev. and smoke
Just wanted to hear it after installing 3000gsk. 17 deg. of
timing.Performance valve adj. marine head gas.Already have done afc spring
custom ground fuel plate rotated plungers K&N bhaf Banks Big Head waste
gate set @ 40 psi. or so of Boost.Dimond Eye 4" turboExhaust
with muffler.Bllet torque converter and valve body.
12 valve cummins rollin coal
My 1995 12 valve cummins showin off...again. 75/stock injectors, full cut
delivery valves, 0 fuel plate, super b 63mm turbo, afe full intake, high pressure Boost/innercooler lines, Boost elbow, and a 10" single stack....enjoy
whats wrong with it?
after i put on a 4k gsk it had this problem, i replaced the valve springs
with 60lbs but it still has it. the problem is once it hits close to 3000
rpm it starts to sputter and smoke, just watch.
First Cummins to 5000+ RPM with EFILive
This is a short video of a no-load run to 5300 rpm's on an 06 CR Dodge
tuned by Fleece Performance using EFILive. Notice the tach gives up the
ghost at 4800 but the rpm's keep on climbing.
There are screenshots of the datalog at http://forum.efilive.com .
The truck has upgraded valve springs, push tubes etc to be able to handle
Contact us at 765.676.5063 or www.fleeceperformance.com for more
97 12v cummins pullin 30k
12v bd turbo 370 sticks banks intake
dpi Exhaust manifold mbrp 4" dave
goerend transmision. Cedar City Diesel Tuners. 23 bales 1k each 8600
lb trailer This load did not go on the road just field to barn.