AirBagit: How to properly install Airbagit Air Struts
If your installer knows what he is doing, you will never have a problem
installing air struts. Thrust bearings must PROPERLY installed, and never
ride with less than 10 psi, and never overextend the shafts by riding fully
extended. They are built for riding at the ride height they are setup for
at the factory
Drag 'N' Wagon [S5 Ep.11-4]
Today on GEARZ, Stacey rolls the Ram 1500 Express back in the shop and
starts to transform it into the Drag'N' Wagon. Pulling on the legacy of the
iconic Superbee, the Little Red Wagon wheelstander, and the current
popularity of Dragon folklore, Stacey sets out to create a modern street
machine from a lowly base pickup that anybody can afford. To get the rig to
handle, a state-of-the-art air suspension is installed, along with massive
brakes, and cool performance wheels and tires. One thing about this
wagon... it's going to handle!!!!
After that, it's off to the Dyno to see what kind of
difference a spark plug can make in the performance of your engine.
4-Link Rear Suspension Install
Step by step instructions on how to install a Ridetech weld-in 4-link onto
a streetrod chassis. For more information go to http://www.ridetech.com
How to Install Airbag Helper Springs (Firestone Ride Rite)
Handle more weight, properly! In this video we are installing Ride Rite
airbag helper springs from Firestone for XMT Construction to better help
the pickup handle payload and heavy tongue weights when towing.
Here we go through some basic tips to installing the airbags to make your
install easier and proper.
Product Featured: Firestone Ride Rite Airbag Helper Springs
How to install plug n play airbag suspension kit? Air ride suspension installed on caddy
This video will demonstrate a quick tutroial on how to install the complete
plug n play kit that http://www.rideonairbags.com/ offers. Please note
every car is different for installation and other cars may be all 4 air
struts or all 4 air bags with no air struts. This video is just to show you
what is all involved with installing a air bag suspension kit on a vehicle.
If you are looking for a complete air bag suspension kit for your vehicle
check out http://www.rideonairbags.com/
Drag'N'Wagon and Carrera Slot Cars [S6 Ep.2-2]
Today on GEARZ, Stacey brings back the Drag'N'Wagon to see if he can get
the beast to breathe some fire! The first thing he puts on is an ATI Supercharger system to get some air sucking
in. Then adds some hotter coils to help light the flame...and finally slaps
on a bigger Exhaust system to help
blow the air out. If you are wondering how to make a street beast out of
an entry level truck, this show spells it out. Then it's on to the world
of slot cars, as Stacey explores the past, present, and future of the
little motorized miniatures that helped shape the gearhead world as we know
it and introduces you to Carrera slot cars.
VW Golf GTI Air Suspension installation
Here's the video shot during the installation of the Air Lift air
suspension system fitted to eurotuner magazine's Mk4 VW GTI 1.8T. You can
see another video of the finished system operating that is listed on this
Old Trucks and Other Junk [S5 Ep.12-3]
Today on GEARZ, Stacey rolls in an old '67 Ford pickup that has been hacked
on over the years, and shows how to get rid of the old afterthought floor
shifter, and convert it to a column shift that will actually shift gears!
After that, Stacey digs into one of the newest fuel injection units on the
market and shows how easy it is to install, and then demonstrates how to
shave the drip rail off of your muscle car. Finally, we answer the
question: Is it possible to put chrome plating on aluminum or stainless
steel? We take a trip to Advance plating in Nashville to find out. There's
so much stuff going on, you're gonna need to watch this show twice!
Airkewld Ultimate 4" Narrowed Beam Air Ride Kit
Airkewld 4" Narrowed Ultimate beam with our Standard Air ride Kit. We
installed the lower shock relocaters to reduce the PSI to lift the car by
35psi. The beam is 100% Made in America with brand new parts. The tie rods
are 100% new, Forged drop spindles, BAD Series disc brakes with Wilwood 2
piston Calipers on 17" Billet wheels with 205-40-17's tires.
Junkyard Truck [S4 Ep.2-1]
On this episode, Stacey goes where all of us have been before to pull an
old derelict SEMI TRUCK ('69 Loadstar/International) out of a quiet
junkyard to demonstrate the steps necessary to get an old, neglected
vehicle running again. From rat's nests to chicken poop, it's all here as
Stacey slowly coaxes the old truck back to life. This show definitely
drives the point home that if something like this can be revived, there's
NOTHING that you should be afraid to tackle as long as you are armed with a
set of tools and a sense of adventure! Go get 'em!