Emery@STM going for some 9s in their Full Weight SSL Evo!
Emery gunning for some 9 second passes in his and Shawna's Full weight SSL
AEM EMS tuned by Emery@STM
Stock Brakes, Hoosier Drag Radials on MR Wheels
Drove the car 3.5 hours to the track, did passes exactly how it is driven
everday, drove home!
STM - HD2 EVO - Shake Down
The STM crew shake down, the HD2 EVO at a private test day prior to the
Northern Nationals at Fram Autolight Dragway, Meremere, New Zealand.
With a soft tune to get some data, the car went 1.17 to the 60'.
We only got one pass in as we found tiny pinhole in the intake port of the
cylinder head. This resulted in oil from the rocker cover entering the port
at idle. The pin hole is the result of a thin section of the head casting
where the head was ported which didn't show up until the car was put under
some stress at the track.
The car will be racing next at the South Island Champs. Thanks for all your
See our build up thread of this car.
Motul - http://www.motul.co.nz
Sparktech Ignitions - http://www.sparktechignitions.net/
HD2 - http://www.horizontaldrilling.co.nz/
evo smokes v8 drag car
my evo 4 rs takes on a v8 cortina drag car on an unprepped track, they put
water down to so the rwd can smoke up, hense my 2 sec 60ft, still smoked
him with an 11sec et
ILR Built Street Evo IX MR, firstname.lastname@example.org !!!
A Full weight 100% Street Evo 9 MR, testing it out.
Still dialing the launch control, to try to improve the
60' and avoid bogging.
ILR HTA3586R turbo kit.
ILR long block
QM twin clutch
Sheptrans Stage 2 transmission
STM Project DS9 - 8.63 @ 164MPH
David Stock driving his STM prepared EVO 9 to a new PB of 8.63 @ 164mph at
Masterton Motorplex, Masterton, New Zealand. 9th of January 2010.
STM | Speedtech Motorsport Ltd
Performance Vehicle Specialists
9 Second Evo
A Lancer Evo with 900whp running 9 second 1/4 miles at Portland