Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

2002 Chevy Silverado 2500HD Duramax Diesel Straight Pipe (HD)

2002 Chevy Silverado 2500HD Duramax Diesel Straight Pipe


 


More Videos...


Test Drive 2002 Chevrolet Silverado 2500 HD Duramax (Start Up, Exhaust, In Depth Tour)
In this video I give a short tour and test drive of a 2002 Chevrolet Silverado 2500 HD Duramax. I take viewers on a close look through the interior and exterior of this truck while showing details, over viewing of features, and noting unique styling cues to the vehicle itself. I show the truck idling as well as take it on a thorough test drive through the city and highway on various surfaces. A thorough drive of this truck designed to give others a greater overall appreciation of the vehicle.





07 Chevy 2500HD LBZ 5 inch MBRP Muffler vs. Straight Pipe - DURAMAX
This is my 07 Chevrolet 2500HD with the 6.6 Duramax LBZ. The truck has the MBRP downpipe installed. The first video is with the 5 inch MBRP downpipe back with the muffler. The second shot is with the 5 inch MBRP downpipe back straight pipe with no muffler. This is to give everyone an idea on what they want to choose when they go to purchase an Exhaust for their truck.





MARS 5HP DIESEL ENGINE - 1st Start Up in 50 Years!
Watch as an early 1940's MARS Diesel engine is fired up after 50 years. Originally acquired from a cane farmer in Nambour, Queensland, Australia in the 1970's, this engine sat in careful custody with another three owners before finally retiring with me. MARS engines were made by the MARS Machine Tool Manufacturing Company in Brisbane, Australia and were preceded by the horizontal and vertical Rapson and Dutton engine, made by the same company under the Rapson and Dutton company name. MARS engines are not Lister clones. Mars engines are bigger, heavier and more robust than Lister engines. When you listen to a Lister and then to a MARS you will agree. This engine has a 3 " diameter crankshaft and not one component is interchangeable with a Lister. MARS engines were commonly used in industrial situations such as factories to power line shafts which powered a number of machines, a task Lister engines had some trouble with apparently with their crankshafts twisting under the load on start up, and why this company made the Mars Diesel. 5 HP MARS engines were painted Maroon colour as standard from the factory although there are variations of colour in existence. 8 HP engines were a different colour. This engine has not run since the original owner sold it in the early 1970's. Apparently it had not run for some years before that. The second owner sadly passed away before restoring it and it sat in a shed untouched with the third owner. Close friend and temporary fourth owner, Simon Devere, assisted actively in the mechanical restoration when I purchased it and assisted in the first start after its mechanical restoration. This man is a genius when it comes to diesel engines and he has the nickname "The Lister Whisperer" for good reason. Thanks "Slippery". This engine appears to have not done much work judging by its internals. Work to the engine includes new rings, liner/cylinder hone (the original factory liner had indiscernible wear in it), new valve guides made to original specs, new valves to original specs (original was bent and caused damage to the guide) , new big end Babbit bearing, new conrod bush, very light head machine to ensure true flatness, new internal oil pipes, new head gasket, new oil gaskets, new high pressure line, new welch plugs in the head and new oil pickup. There are still remnants of the original factory maroon paint on it that have survived the years of weathering out in the cane fields. Cosmetic restoration is planned shortly to bring it back to its original livery. It will be mated with a steel transporter to emphasise its industrial heritage and will be rallied with pride. Video of the finished engine on transporter will be posted when it is done. Enjoy and please share if you like. This is the only video of a Mars engine running to this date anywhere. Hope to see more. Cheers Phil





Awesome V12 Monster diesel engine Awake and Alive startup
Awesome V12 Monster diesel engine Awake and Alive startup The first V-type engine (a 2-cylinder vee twin) was built in 1889 by Daimler, to a design by Wilhelm Maybach. By 1903 V8 engines were being produced for motor boat racing by the Société Antoinette to designs by Léon Levavasseur, building on experience gained with in-line four-cylinder engines. In 1904, the Putney Motor Works completed a new V12 marine racing engine -- the first V12 engine produced for any purpose.[2] Known as the 'Craig-Dörwald' engine after Putney's founding partners, the engine mounted pairs of L-head cylinders at a 90 degree included angle on an aluminium crankcase, using the same cylinder pairs that powered the company's standard 2-cylinder car. A single camshaft mounted in the central vee operated the valves directly. As in many marine engines, the camshaft could be slid longitudinally to engage a second set of cams, giving valve timing that reversed the engine's rotation to achieve astern propulsion. "Starting is by pumping a charge into each cylinder and switching on the trembler coils. A sliding camshaft gave direct reversing. The camshaft has fluted webs and main bearings in graduated thickness from the largest at the flywheel end."[3] Displacing 1,119.9 cuin (18,352 cc) (bore and stroke of 4.875" x 5" (123.8 x 127 mm)), the engine weighed 950 pounds (430 kg) and developed 150 bhp (110 kW). Little is known of the engine's achievements in the 40-foot hull for which it was intended, while a scheme to use the engine to power heavy freight vehicles never came to fruition.[2] One V12 Dörwald marine engine was found still running in a Hong Kong junk in the late-1960s. Two more V12s appeared in the 1909-10 motor boat racing season. The Lamb Boat & Engine Company of Clinton, Iowa built a 1,558.6 cuin (25,541 cc (5.25" x 6" (133.4 x 152.4 mm)) engine for the company's 32-foot Lamb IV. It weighed in at 2,114 pounds (959 kg). No weight is known for the massive 3,463.6 cuin (56,758 cc) (7" x 7.5" (177.8 x 190.5 mm)) F-head engine built by the Orleans Motor Company. Output is quoted as "nearly 400 bhp (300 kW)". By 1914, when Panhard built two 2,356.2 cuin (38,611 cc) (5" x 10" (127 x 254 mm)) engines with four-valve cylinder heads the V12 was well established in motor boat racing.[2] In automobiles, V12 engines have not been common due to their complexity and cost. They are used almost exclusively in expensive sports and luxury cars because of their power, smoother operation and distinctive sound. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ▬▬ ★ MORE INTERESTING VIDEOS: http://www.youtube.com/watch?v=yrbwGmtZ8pM&list=UUYH8swcp71EHt-88lkaMDTQ ★ SUBSCRIBE: http://goo.gl/GynuUU ★ Follow my Twitter: https://twitter.com/GeorgeDominik1 ★ Thanks For Watching ★ ★ Post comment , share and tell us what u think ★ ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ▬▬





Duramax Fuel Filter Install - Chevy Duramax #PFF50216 : #1130730
Having problems installing a fuel filter on a Duramax? This can be a difficult task sometimes and we will show you the proper way install this filter. Want a Racor Fuel Filter? Order one Today! (PFF50216) http://www.thoroughbreddiesel.com/fuel-filter.htm How about a PPE Fuel Valve? Order one Today! (1130730) http://www.thoroughbreddiesel.com/ppe/race-fuel-valve.htm Saving Diesel Lives! Check out our online store for performance products at http://www.thoroughbreddiesel.com/ Contest, Videos, Give-A-Ways, Free Diesel Advice for our Facebook Fans: http://www.facebook.com/Thoroughbreddiesel





2015 Silverado HD 3500 Duramax Diesel Review & Walk Around - New 2015 Chevy HD Duramax Video
2015 Chevy Silverado HD 3500 Duramax Diesel Video Walk Around - Review from Riverton Chevrolet by Allen Sauer - www.rivertonchevy.com Utah's #1 Chevy Silverado Dealer. Take a look at the All-New Redesigned 2015 Chevrolet Silverado HD 3500 Diesel Duramax in Salt Lake City, Utah at Riverton Chevy. Riverton Chevy is located in Sandy, UT in the South Towne Auto Mall, serving all of Utah including Salt Lake City. View our 2015 Chevrolet Silverado HD 3500 Diesel Duramax Inventory http://www.rivertonchevy.com/VehicleSearchResults?search=new&model=Silverad o+3500HD&minYear=2015 For more information or to schedule an appointment call us at 801-576-4675 - www.rivertonchevy.com Take a first look at the newly redesigned 2015 Chevrolet Duramax in Utah! COMMENT BELOW WITH QUESTIONS!





Chevy Duramax with Dual cat back 5' exhaust
My 2002 Chevy Silverado 2500HD 6.6L Duramax with Dual Cat Cack 5' Exhaust. The rest of the truck is stock. Not the best camara. Comment anyway





GIANT 2010 CHEVROLET DURAMAX 2500HD 4X4 on 46's PULLS STUCK MUD TRUCK!!
2010 Chevrolet 2500HD LTZ Crew Cab Z71 4x4 Duramax diesel with 14" of lift and 46" Mickey Thompson Baja Claw tires on 20" wheels. Attempts to pull out a stuck Chevy with a dinky strap someone had. It kept breaking, so they didn't want to risk damaging that nice truck, so Joey pulled him out with Keith's big Chevy. Silverado on tractor tire detials - 5.7L Vortec with headers. 6.72 gears in the front and rear ends. 241 transfer case that also runs into a divorced 205 before heading to the axles. Be sure to check us out on Facebook at Triple-X Motorsports & Outdoors for all the latest updates! http://www.facebook.com/pages/Triple-X-Motorsports-Outdoors-RekjavicXXX/143 751552330968





Installing New Injectors Chev Duramax
New Install Duramax Diesel Injectors





Alex's self tuned duramax
new video of 2003 chevy duramax with 6" stack revving and loping.





Injector Rebuilding Process for 2002 Duramax 6.6 Diesel with the LB7 Engine
Purchase at www.wholesaleinjectors.com This Video is a Quick rundown of how to remove injectors from a 6.6 LB7 and actually Rebuild your existing injectors with a kit that I now sell. We also have these kits for the LLY engine now!!! Its not as difficult as you think it would be. Contact us for the kit, We sell a basic kit for only $435 delivered to the USA. It now includes 8 new nozzles, all O-rings and the copper washers. The tiny replacement steel balls and the return line seals are also available. Cheaper then anywhere else. Hopefully this helps anyone out who is looking to rebuild injectors. You can contact me at nateornat@gmail.com or purchase at www.wholesaleinjectors.com. We will sell individual parts too if your interested on the website, but this kit will cover your rebuild. (We have the standard or the +30 nozzles for the LB7 and the LLY) Please don't post requests for parts on the comment section. PLEASE use the email I provided above to contact me about parts or even questions. I don't look at this page enough to be able to respond to requests here in a timely manner. Thanks





RUN AWAY Detroit Diesel! 453-T
DD 453-T runs away! rack gets stuck on valve cover. almost lost some fingers too, it was all i could find. F'ed up new turbo compressor wheel, was only damage thankfully!





DURAMAX DIESEL SAND RAIL
DVDs & APPAREL - http://www.bustedknuckle.com The Merchant Auto Duramax Diesel Sand rail was rolling coal at the 2014 Griztek snow challenge. It has a 700hp Duramax and a powerglide transmission. Follow us on Facebook - http://www.facebook.com/bustedknucklefilms





Haze during Idle Injector Replacement Solutions - 01-04 Duramax
So your Duramax has haze during idle. What does it mean and how do I fix it? Haze during idle could lead to major problems down the road. You need to fix immediately! Want some injectors? Order one Today! http://www.thoroughbreddiesel.com/injectors.htm Saving Diesel Lives! Check out our online store for performance products at http://www.thoroughbreddiesel.com/ Contest, Videos, Give-A-Ways, Free Diesel Advice for our Facebook Fans: http://www.facebook.com/Thoroughbreddiesel





King of the Hill - Chevrolet Duramax - Ford Powerstroke - Dodge Cummins
www.marcheitzchevy.com Marc Heitz Chevrolet presents the Chevy Silverado 2500 HD GMC Sierra 2500 HD Duramax vs Ford Duramax Scorpion Engine vs Dodge Cummins H.O. engine. In a True test of all 3 diesel 3500 trucks with high output heavy duty suspensions, the king of the hill is revealed. At Marc Heitz Chevrolet we have all of the above available.




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

1972 BMW 2002 : 8.580 @ 156.592
Tero.Laukkanen, Engine: 2.2l -16 valve, Turbos: Turbo.... Tires: M / T ET street


1964 Chevrolet Chevy 2: 10.610 @ 117.000
, Engine: 355, Tires: firestone


1991 Chevrolet Chevy S10: 11.526 @ 115.370
Jason Miller, Engine: 350, Tires: micky thomson 32-14.5-15


1967 BMW 2002 2.1 turbo: 12.250 @ 120.000
pentti pekola, Engine: 2.1 8valve, Turbos: modified holset 3 ld Tires: 245 street normal


2005 Chevrolet Chevy Corvette C6: 12.557 @ 110.860
James, Engine: LS2, Tires: Stock non Z51 run flats


1955 Chevrolet Chevy : 12.720 @ 109.500
Ken Abbott, Engine: 454 Chevy, Tires: 28.5 Slicks on rear


1975 BMW 2002 : 14.008 @ 98.450
Arturo Martnez, Engine: 1990, Tires: Bridgtone 215X50X13 DOT


1975 BMW 2002 tii: 15.500 @ 95.000
Jose Martinez, Engine: 2002, Supercharger: no Turbos: no Tires: 205X50


1976 BMW 2002 : 17.466 @ 75.320
Zvonimir Kokorovic, Engine: M10 2.0L I4, Tires: 215 Sumitomo


 


©2014 DragTimes - Disclaimer