When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $163.14
America\'s Oldest Speed Shop® Lincoln, NE Wilwood 260-7563 Tandem Master Cylinder w/ Remote Reservoirs, 1 Inch Sku # 8352607563 Mfr. Part # 260-7563 Condition New Brand Wilwood Sold Each Details Info
Tandem remote master cylinders provide one of the safest ways to actuate four wheel or dual caliper axle brake systems. This versatile, lightweight and easily adapted master cylinder provides single pushrod activation of two separate brake fluid circuits. By completely isolating the fluid reservoirs and circuits, the front and rear brakes are able to operate independently of each other and provide a safety net should any one side of the system become inoperable. Shipped complete with the master cylinder and all necessary hardware including 30 inches of hose that can be cut to the desired length for remote mounting of the two 4 ounce fluid reservoirs.
- Can be bolted directly to Wilwood single mount pedals
- 50/50 front/rear brake output from a 1.00" bore with 1.10" stroke
- Great match for Wilwood\'s Bolt-On-Disc Brake Kit systems configured from OE components
- Reservoirs can be either remote or master cylinder mounted
(PDF)
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.
Specs Sold in Quantity Each Finish Natural Outlet Count Tandem Reservoir Type Remote Master Cylinder Material Aluminum Thread Pitch 5/16"-24 Outlet Fitting 3/8"-24 MFG Centerline of Holes 2.25 Overall Width 2.91 Mounted Length 7.03 Area 0.78 GTIN Code 889545067910 Reservoir Included Yes Stroke 1.1 Brake System Type Disc Position Firewall Reservoir Material ABS Plastic Outlet Fitting 2 15mm x 1.00 Overall Length 10.9 Master Cylinder Bore Size 1 Inch Reviews great upgrade for old single master cylinder systems. Rated by Oliver on February 02, 2017Summary: I used this item to upgrade the brakes on a 1946 Willys cj2a. The installation was really simple. I mounted the master cylinder to a 3" x 4" x1/4" thick plate. The plate was then welded to the mount on the frame where the old master had been. I used the support that connected the brake pedal pivot to the old master cylinder by simply shortening it up and bending it 90° then bolting it to the new mount. The remote reservoirs were mounted on the firewall above the master cylinder. This unit came with 10lb residual valves for both front and rear brakes. They are simple to remove before the brake lines are hooked up. My Jeep has discs in front and drums in the rear so I took both residual valves out because I already had a 10lb residual valve in the rear brake line, I installed a 2lb residual valve in the front brake line. The original Jeep pushrod works fine by simply grinding the knob off of the end, it is also adjustable.
Pros: Versatile works great to upgrade an old system Rugged Construction Easy To Set Up
Yes, I recommend this product.
This product I using on a 1930 model and works fantastic Rated by Fast on January 27, 2017Summary: Installed on 31 model lay with remote tanks works great
Pros: Easy To Set Up
Yes, I recommend this product.
master cylinder for tiny space Rated by dandit on January 14, 2016Summary: This master cyl saved my 32 Ford roadster--it had to fit a very confined space and works perfectly
Pros: Well Made--remote Fill
Yes, I recommend this product.
Keeps me from crashing! Rated by Racing Strong Motorsports on January 13, 2016Summary: Crashed when we lost brakes in the race car using a single reservoir master cylinder . This is a good product separating front and rear brake systems to help allow the car to stop if there is a catastrophic failure in the brake system.I needed a firewall adapter to make it fit to the Toyota MR2, but this was easy to make with plate aluminum/steel.
Pros: Easy Install Keeps My Drivers Safe
Cons: Requires Some Fab Not A Bolt-in
Yes, I recommend this product.
Perfect for my project Rated by Fabman on May 21, 2010Summary: Very basic, effective, inexpensive, and easy to install. Wish plugs for the bleeders were included.
Pros: Bench bleed easy Easy setup Low Price
Yes, I recommend this product.
Related Items / Suggested Parts Alum. 5/16"-24 Rh Female Master Cylinder Return Spring Kit Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit ShippingShipping Policy:
- Please pay for all items at the same time.
- If shipping rates do not combine properly, contact us or send a buyer requested total.
- You must contact us before making payment to combine your items.
- Failure to do so will result in separate shipping fees for each individual item.
- We cannot combine your order if you have already paid.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS. All exchanges need to have reshipping charges included.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise. Payment
- Accepted Payment Methods - PayPal and major credit cards are accepted. Sales tax applies to the following states: 7.25% in Nebraska, 7.0% in Indiana, 6.0% in Kentucky, and 9.5% in Washington.
- Terms - Immediate payment is required on all listings.