When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $200.00
Used Stainless Steel Turbine Housing
part number
740902-0586
oem number
6852 tial
Product Description
Stainless steel material
V-CLAMP INLET AND OUTLET
Fit for GT2860/GT2871 TW :47mm
A/R .86
GT28
TiAL® GT28 V-band Turbo Housings are manufactured from stainless steel to ensure long lasting performance. These compressor housings are physically smaller than traditional cast turbo housings and offer nearly a 33% weight reduction. TiAL® Turbine Housings are designed to mate with Garrett® GT Series Turbocharger's and are offered in a variety of A/R sizes. Typically a smaller A/R will offer quicker spooling for better response at lower RPM's. The downside to choosing a lower A/R is that you sacrifice peak power at high RPM's due to the higher exhaust back pressure. Therefore, if your goal is to reach peak horsepower and aren't worried about response times, then a higher A/R would be better suited for you needs. Typically higher A/R compressor housings are chosen for racing applications and lower A/R's are chosen for street applications.
TiAL GT28 Housing Features:
For GT and GTX 28 Series Turbos
Compatible with the 53.9mm 76 trim turbine wheel
Approximately 33% turbo weight reduction vs. iron housings
Cast stainless steel provides a beautiful smooth finish inside and out
Smaller physical dimensions than standard housing for tight engine bays
Inconel bolts for vibration and stretching resistance in extreme applications
Locking tabs included for high vibration and stretching resistance in extreme applications
Full V-Band Utilization eliminates the need for bolts and gaskets
V-Band inlet design allows for pivoting of the turbo to aid clearance issues and tight fits
Available with (2) A/R options: 0.63 or 0.86
Better heat retention than cast iron
What's included with the housing:
Turbine Housing
(3) Moon Tabs
(6) Inconel Bolts
(3) Locking Tabs
Also available:
V-band Inlet Flange - Counterbored for 2-1/8" OD Tubing (GTVFL3.0)
V-band Inlet Clamp (VC300)
V-band Outlet Flange - Counterbored for 3" OD Tubing (VBF300M)
V-band Outlet Clamp (VC355)