When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $4500.00
THIS IS MY 4 TH GEN GEAR BOX
THE FIRST PICTURE IS IF ITEM.
THIS GEAR BOX IS DESIGNED TO BE ADJUSTABLE IN THE FRAME FOR CHAIN ADJUSTMENT.
ALL SHAFTS ARE 4340 SPLINED AND HEAT TREATED.
PLANTARY DRIVEN REVERSE GEARS (ALCOHOL FUNNY CAR PLANTARYS FROM LENCO RACING).
THIS IS THE SAME GEAR BOX THAT I USE IN MY CLASS 10 OFFROAD BUGGY.
I HAVE A CUSTOMER RUNNING 617 REAR WHEEL HP ON MY GEN 1 BOX WITH NO FAILURES (5 YEARS OF ABUSE)
1.38 TO 1 GEAR REDUCTION BUILT IN BOX, 930 DRIVE FLANGES.
13 1/4 \" WIDE AT CV BOLT FLANGE.
LIVE AXLE NO DIFF FOR BETTER SLIDING AND POWER TURNING SETUP FOR DISK BRAKE.
THIS REVERSE BOX IS CHAIN DRIVEN INSIDE,USING A 3 ROW 60 CHAIN (VERY LITTLE POWER LOST)
IT IS SET UP FOR A DISK BRAKE ON THE BOX,AS OTHER BOXS REQUIRE 2 WHEEL BRAKES.
(BRAKE ROTOR 4 PISTON CALIPER AND PADS INCLUDED
(ALL MOUNTS AND ADJUSTERS $140.00) CALL
THIS BOX HAS THE BEARING SUPPORT FOR THE INPUT SHAFT AS OTHER ONES DONT.
THIS BOX HAS MOUNTS SO IT CAN BE ABLE TO MOVE WITH ADJUSTERS ON THE TOP MOUNTS SO YOU DONT NEED A CHAIN TENSIONER
I HAVE BEEN BUILDING THESE BOXS SINCE 1987
BEWARE THAT MOST OTHER BOXS REQUIRE REAR WHEEL BRAKES THIS ONE DOES NOT.
MOST OTHER BOXS DO NOT HAVE THE ABILITY TO BE MOUNTED PROPERLY AND WILL MOVE UNDER LOAD.
MANY OF THEM USE KEYS AND KEY WAYS INSTEAD OF SPLINES.
OTHER BOXS ARE TIPICALLY TO TO TO TO LOW GEARED,ANYWHERE FROM 3 TO 1,TO 6 TO 1.
THEY ARE SPUR GEAR DRIVEN INSIDE AND THAT IS WHAT WASTES YOUR POWER AND ARE WEAK.
WHEN THEY ARE THIS LOW GEARED A 15 TO 20 TOOTH SPROCKET ON THE BOX.THIS IS WHY THEY BURN AND BREAK CHAINS FROM THE ENGINE.RUNNIG THE CHAIN AROUND 2 SMALL GEARS THE CHAIN IS SHORTER AND CREATES HEAT .THIS IS A VERY BIG PROBLEM OUT THERE WITH OUTHER GEAR BOXS.....SOME GUYS ARE RUNNING FANS TO KEEP THE CHAIN COOLER (HOW MICKY MOUSE)
THE GEAR BOX I BUILD USES BETWEEN A 45 TO 50 TOOTH SPROCKET DEPENDING ON TIRE SIZE.WITH THE LARGER SPROCKET ON THE BOX THE CHAIN IS LONGER LESS ANGLE ON THE CHAIN.LESS HEAT.
NONE OF THEM HAVE A INPUT SHAFT BEARING SUPPORT.MY GEAR BOX DOES AS IT IS NOT A TWISTING LOAD SUCH AS A DRIVE SHAFTGOING TO THE BOX BUT A PULLING LOADFROM THE TOP OF THE SPROKET.
THE FASTEST MINI BUGGY OUT THERE (MIGHTY MOUSE) RUNS THE GEN 1 GEAR BOX.
THIS IS THE TOUGHEST GEAR BOX OUT THERE (BEWARE OF SALES MAN BUILT NOCK OFFS)
I DO OFFER A DUAL CHAIN SETUP FOR DESERT BUGGIES OR BUGGIES WITH HUGE POWER.(CALL)
WILL SHIP WORLD WIDE CALL FOR SHIPPING PRICE