Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

T3 TURBO KIT TURBOCHARGER+MANIFOLD+INTERCOOLER 06-11 HONDA CIVIC Si FA5/FG2 K20Z for Sale


Parts Search:
If you like this part use the Google +1 button:


T3 TURBO KIT TURBOCHARGER+MANIFOLD+INTERCOOLER 06-11 HONDA CIVIC Si FA5/FG2 K20Z

Price: $839

This item has been shown 3106 times.

Click HERE for more information about this part.


search also descriptions
T3 TURBO KIT TURBOCHARGER+MANIFOLD+INTERCOOLER 06-11 HONDA CIVIC Si FA5/FG2 K20Z ITEM SKU: TM-K20-S WG-38-SL OFL FG-DP-5B BOPP-HC06SI+ITCL-1S

    High Compression/ Boosting T04E Turbocharger

    The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.


    Specifics and Benefits:

  • Capable of Boosting Horse Power up to 300+ BHP
  • High Quality Material, Cast Housing with Durable Steel Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt Exhaust (Downpipe) Flange: Standard T3 5-Bolt Intake Inlet/ Outlet: 3.00"/ 2.00"

    Compressor: Trim: 55 A/R: .50 Inducer: 50.50 Exducer: 76.00
    Turbine: Trim: 73 A/R: .63 Inducer: 65.50 Exducer: 55.90

    High Performance Exhaust Turbo Manifold

    The heart of any Turbo system is the Manifold and the Turbocharger. These form the basis where the rest of the turbo system is built around. Turbo manifolds have only one, but the most critical purpose in turbo systems, and that purpose is to expel exhaust gas into the turbine of a turbocharger as efficiently as possible. Tubular stainless steel manifolds are chosen over cast manifolds for big power applications. Tubular stainless manifolds feature better and more consistent flow of exhaust gases. Most of the tubular Stainless manifolds also feature the placement of the wastegate flange towards the middle of the collector to allow accurate readings and precise control.


    Specifics and Benefits:

  • High Performance Tubular Turbo Racing Design
  • Made of High Quality T-304 Polished Stainless Steel Alloy Material for Strength and Durability
  • Computerized Mandrel-Bended to Maximize Air Flow Smoothness
  • TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing
  • Increase Engine Exhaust Output and Efficiency
  • 35mm/ 38mm External Wastegate Port and Flange Included
  • Standard T3 (T03) Turbo Flange Configuration Outlet

  • Lightweight Aluminum Bolt-On Front-Mount Intercooler

    When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine. Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present.


    Specifics and Benefits:

  • High Performance Bar and Plate Turbo Racing Design
  • Made of High Quality T-6061 Aluminum Durable Material
  • Helps Reducing Engine Inlet Temperature
  • Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level
  • Intercooler Size: 20.00" (L) X 13.50" (H) X 2.50"(W)
  • Core Size: 18.50" (L) X 7.50" (H) X 2.25"(W)
  • Inlet/ Outlet: 2.50"/ 2.50”
  • Direct Bolt-On Front-Mount Installation; Easy to Install

  • Bolt-On Aluminum Intercooler Piping

    Specifics and Benefits:

  • Made of High Quality T-6061 Lightweight Aluminum Piping
  • Powder-Coated Surface Finish
  • 7 Major Pipings' Diameter: 2.50"
  • 1 Connector's Diameter: 2.75"
  • 35mm/ 38mm Dump Pipe Included, with Port Insertion on Piping
  • Massive Air Flow Sensor Port Insertion
  • Perfect for Turbo DIY Project
  • Increase 65% Air Flow comparing with other Standard Piping

  • Universal 35mm/ 38mm Wastegate with Spring

    Specifics and Benefits:

  • High Strength Cast Steel Body with Steel Head
  • Comes with 8-PSI Spring Installed
    Stainless Steel Braided Oil Feed Line

    Specifics and Benefits:

  • Made of High Quality Stainless Steel Hose
  • 10AN Fittings Anodized Ends
  • Inner Diameter: 0.25"
  • Length: 36.00"
  • 1/8 NPT Fittings Natural Polish Finish
    T3/ T4 5-Bolt Mild Stainless Steel Downpipe Flange

    Specifics and Benefits:

  • Made of High Quality T-304 Mild Steel Durable Material
  • Construction Prevents Warping Due To High Heat
  • 5-Bolt Design Shape
  • 0.50” Thickness Flange
  • Fits T3/ T4 2.5" Diameter 5-Bolt Turbo/ Turbocharger Flange
  • Included for DIY Welding Need
  • 100% Brand New
    Professional Installation is Highly Recommended (No Instruction Included)

    Package Includes:

  • 1 X T04E Turbocharger
  • 1 X Stainless Steel Turbo Manifold
  • 1 X External Cast Steel Wastegate WG
  • 1 X Braided Oil Feed Line
  • 1 X Lightweight Aluminum Intercooler
  • 1 X Set of Bolt-On Aluminum Piping as Shown Above

    9-Piece Piping Set Includes:

  • 8 X Aluminum 2.50" Pipings
  • 1 X Dump Pipe Kit
  • 11 X Silicone Hoses
  • 21 X Bolt-Tight Clamps
  • 1 X T3/ T4 5-Bolt Flange
  • Hardware as Shown in the Picture Above


    Application:

    Direct Bolt-On:
  • 06-11 Honda Civic Si FA5/ FG2 K20Z3
    (Fits Si Models with 2.0L K20Z3 Engines ONLY)
  • Please Check Compatibilities for Exact Years and Models
    Modification might be Required for Some Universal Parts
* Professional Installation Highly Recommended! No instructions included! * DOMESTIC LOWER 48 US STATES: $0.00 AK / HI / PR / PO BOX: $199.98 CANADA: $199.98 REST OF THE WORLD: $498.98 SALES TAX: CA ONLY Shipping Information:
  • VERY IMPORTANT: Double check shipping address. We are not responsible for incorrect or undeliverable addresses.

  • Please use Shipping & Payments tab on top of page for shipping details for your location.

  • Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.

  • For Canada shipping please select the lowest price. We do not offer expedited shipping.

  • US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.

  • Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.

  • Customer assumes shipping charges incurred in shipping to undeliverable address.

  • International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.

  • We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.

  • We are not responsible for any changes to address after item has been shipped.
Return policy:
  • 14 Days money back, please notify us within 14 days after you've received your purchased item.

  • All return requests must be submitted through your account.

  • You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package.

  • Buyers pay for return shipping fee.

  • Items to be returned must be in re-sellable condition.

  • All returns are for refund ONLY. No exchange accepted.

  • Returns for refund are subject to a 20% restocking fee.

Terms & Conditions:
  • For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing.

  • All items do not come with installation instruction unless otherwise specified.

  • If item is questionable, please consult your local professional/mechanic before making purchase.

Contact:
  • Please use the "Ask A Question" form above to contact us. Please note that we only work from 9am-6pm PST M-F but are OFF on the weekends so messages sent after business hours especially on Friday, will be answered the following Monday.
© 2011 SPEED DADDY


Follow DragTimes on Twitter
Share |


Similar 1/4 mile timeslips to browse:

2003 Honda Civic EX coupe: 6.525 @ 213.500
stephan papadakis, Engine: acura nsx, Turbos: twin 64mm Tires: toyo


1995 Honda Civic DX: 8.192 @ 174.080
Kenny Tran - Jotech, Engine: 1.8 Liter, Turbos: Garrett GT4202 Tires: M/T


2000 Honda Civic SI: 8.411 @ 175.320
Stephanie Eggum, Engine: B18C1, Turbos: GT42R 74mm Tires: Mickey Thompson


2003 Honda Civic ex: 8.680 @ 169.000
John Brown, Engine: b18c, Turbos: t72 Tires: gooyear


1990 Honda Civic DX Hatch: 9.200 @ 162.000
Jim, Engine: LS VTEC B18 LS Block and B16 Head, Turbos: T70 Tires: Full Slicks


1997 Honda Civic Coupe Dunlop NoLimit VTG: 9.439 @ 151.000
Witold Karalow, Engine: B16A, Turbos: GT40 Tires: M/T 28


1997 Honda Civic Coupe: 9.665 @ 150.000
Vogelsinger Sandor, Engine: B18B, Turbos: Garrett Tires: Yokohama,M/T


1995 Honda Civic vx hatchback: 9.680 @ 155.000
kyle, Engine: b18c1, Turbos: garrett gt4294r Tires: 24.5x8.5x13 m&h slicks


2007 Honda Civic 8th Civic SI: 9.849 @ 155.960
Everton Carvalho, Engine: K24, Turbos: GTX4202 Tires: M/T 24,5x8


1992 Honda Civic CX: 9.870 @ 145.660
Alexei Guinitaran, Engine: 1.8 L, Turbos: 60-1 Tires: M/T 24.5 x 9


1993 Honda Civic Street all motor : 9.871 @ 138.833
Adel tuning, Engine: drag cartel k26,


1998 Honda Civic Turbocharger: 9.930 @ 142.190
Angela Proudfoot, Engine: B18, Turbos: Turbonetics custom


1994 Honda Civic Coupe: 9.980 @ 145.580
Angel Robles, Engine: 1.8 acura integra gs, Turbos: 60-1 Tires: m&h


1993 Honda Civic cx: 10.050 @ 144.440
joytech, Engine: b18c, Supercharger: n/a Turbos: gt40/ Tires: 24.5 x 9.5


1996 Honda Civic EX Coupe: 10.081 @ 146.430
Shannon, Engine: B18C, Turbos: GT40/35R


1993 Honda Civic cx: 10.200 @ 142.000
dean, Engine: 2.0L gsr, Turbos: ITS 62-1 Tires: 24.5x8.5x14


1992 Honda Civic si: 10.350 @ 141.000
jared wahl, Engine: b18c1 block guarded 82mm stock sleeves, Turbos: t70 Tires: mickythompson 24.5x8x13


1996 Honda Civic DX LS1: 10.395 @ 132.610
Travis Chaney, Engine: LS1, Tires: 26x10.50 Hoosiers


1994 Honda Civic Coupe: 10.400 @ 137.860
John Brown, Engine: 1.8 acura integra gs, Turbos: t3/t4 Tires: m&h


1986 Honda Civic SI, AH5: 10.416 @ 125.000
Jimmy Fernandez, Engine: B16a, Turbos: GARRETT T3/T4 60mm / 63mm Tires: FRONT full slick M/H / BACK 205/R50/15 KUMHO ECSTA



©2014 DragTimes - Disclaimer