Parts Search: If you like this part use the Google +1 button:

---

Price: $290

This item has been shown 218 times.

Click HERE for more information about this part.

search also descriptions
T04E T3 TURBO KIT TURBOCHARGER+MANIFOLD+WASTEGATE 97-06 AUDI A4/98-05 VW PASSAT ITEM SKU: TM-AUDI-18L-T3 WG-38-SL OFL FG-DP-5B

High Compression/ Boosting T04E Turbocharger

The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.



Specifics and Benefits:

• Capable of Boosting Horse Power up to 300+ BHP
• High Quality Material, Cast Housing with Durable Steel Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt Exhaust (Downpipe) Flange: Standard T3 5-Bolt Intake Inlet/ Outlet: 3.00"/ 2.00"

Compressor: Trim: 55 A/R: .50 Inducer: 50.50 Exducer: 76.00

Turbine: Trim: 73 A/R: .63 Inducer: 65.50 Exducer: 55.90

High Performance Tubular Exhaust Turbo Manifold

The heart of any Turbo system is the Manifold and the Turbocharger. These form the basis where the rest of the turbo system is built around. Turbo manifolds have only one, but the most critical purpose in turbo systems, and that purpose is to expel exhaust gas into the turbine of a turbocharger as efficiently as possible. There is no match for power and performance for tubular stainless steel manifolds. Tubular manifolds are made up of runners coming from each cylinder, meeting up at a collector. Tubular manifolds yield a higher efficiency rate, as each runner is generally the same circumference. This allows for a much smoother flow of exhaust gas to the turbo. Tubular stainless steel manifolds are chosen over cast manifolds for big power applications. Tubular stainless manifolds feature better and more consistent flow of exhaust gases. Most of the tubular Stainless manifolds also feature the placement of the wastegate flange towards the middle of the collector to allow accurate readings and precise control.


Specifics and Benefits:

• High Performance Tubular Turbo Racing Design
• Made of High Quality T-304 Polished Stainless Steel Alloy Material for Strength and Durability
• Tubular Design to Ensure Equivalent Exhaust Flow Rate from each Cylinder
• Computerized Mandrel-Bended to Maximize Air Flow Smoothness
• TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing
• Increase Engine Exhaust Output and Efficiency
• 38mm/ 35mm External Wastegate Port and Flange Included
• Standard T3/ T4 Configuration Outlet

Universal 35mm/ 38mm Wastegate with Spring

Wastegates provide a means to control the boost pressure of the turbo charged engine. Wastegates work to bypass exhaust flow from the turbine wheel. Bypassing the exhaust flow reduces the power driving the turbine wheel to match the power required for a given boost level. Similar to the BOV, the Wastegates uses boost pressure and spring force to regulate the flow bypassing the turbine. Wastegates are bolted to exhaust manifold or header. The advantage of external Wastegates is that the bypassed flow can be reintroduced into the exhaust stream further downstream of the turbine. This tends to improve the turbine’s performance.


Specifics and Benefits:

• High Strength Cast Steel Body with Steel Head
• Comes with 8-PSI Spring Installed
  Stainless Steel Braided Oil Feed Line

  Oil feed lines and returns lines are an essential part of any turbo system. Oil feed lines bring oil to the turbocharger, at the same time the oil cools and lubricates the moving parts. The Oil Drain Lines take the oil that has passed through the turbo and guides it back into the engine’s oil pan. Without these two components, the turbocharger’s internals would overheat or seize causing major complications.

  
  Specifics and Benefits:

• Made of High Quality Stainless Steel Hose
• 10AN Fittings Anodized Ends
• Inner Diameter: 0.25"
• Length: 36.00"
• 1/8 NPT Fittings Natural Polish Finish
• CNC Machined Turbo Adapter Plate
• Brass Fitting, Block Fitting, and Port Cover Included
  T3/ T4 5-Bolt Mild Stainless Steel Downpipe Flange

  Specifics and Benefits:

• Made of High Quality T-304 Mild Steel Durable Material
• Construction Prevents Warping Due To High Heat
• 5-Bolt Design Shape
• 0.50” Thickness Flange
• Fits T3/ T4 2.5" Diameter 5-Bolt Turbo/ Turbocharger Flange
• Included for DIY Welding Need

100% Brand New
Professional Installation is Highly Recommended (No Instruction Included)


Package Includes:

• 1 X T04E Turbocharger
• 1 X Stainless Steel Turbo Manifold
• 1 X External Cast Steel Wastegate WG
• 1 X Braided Oil Feed Line
• 1 X T3/ T4 5-Bolt Flange
• Hardware, such as Gasket(s) and Bolt(s), if Shown in the Picture Above

  
  

  Application:

• 97-06 Audi A4
  (Base/ Avant/ Cabriolet)
• 97-06 Audi A4 Quattro
  (Base/ Avant/ Cabriolet)
• 98-05 Volkswagen Passat
  (GL/ GLX/ GLS) (ALL Models Above with an I4 1.8L DOHC Turbocharged Engine ONLY)
• Please Check Compatibilities for Exact Years and Models
  Modification might be Required for Some Vehicles

* Professional Installation Highly Recommended! No instructions included! * DOMESTIC LOWER 48 US STATES: $0.00 AK / HI / PR / PO BOX: $99.98 CANADA: $99.98 REST OF THE WORLD: $268.98 SALES TAX: CA ONLY Shipping Information:

• VERY IMPORTANT: Double check shipping address. We are not responsible for incorrect or undeliverable addresses.


• Please use Shipping & Payments tab on top of page for shipping details for your location.


• Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.


• For Canada shipping please select the lowest price. We do not offer expedited shipping.


• US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.


• Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.


• Customer assumes shipping charges incurred in shipping to undeliverable address.


• International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.


• We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.


• We are not responsible for any changes to address after item has been shipped.

Return policy:

• 14 Days money back, please notify us within 14 days after you've received your purchased item.


• All return requests must be submitted through your account.


• You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package.


• Buyers pay for return shipping fee.


• Items to be returned must be in resalable condition.


• All returns are for refund ONLY. No exchange accepted.


• Returns for refund are subject to a 20% restocking fee.

Terms & Conditions:

• For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing.


• All items do not come with installation instruction unless otherwise specified.


• If item is questionable, please consult your local professional/mechanic before making purchase.

Contact:

• Please use the "Ask A Question" form above to contact us. Please note that we only work from 9am-6pm PST M-F but are OFF on the weekends so messages sent after business hours especially on Friday, will be answered the following Monday.

© 2011 SPEED DADDY