When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $164.99
Complete with reducers, gaskets and bolts, Choose Raw, Black, Armor hot coat or stainless steel, Note:: Not for angled plug heads Small Block Chevy Clipster Headers, Raw Finish Sku # 9300108 Mfr. Part # 9300108 Condition New Brand Speedway Motors Sold Set Details Notes These headers are treated with a light coating of anti-corrosion paint to avoid rust during shipment and on the shelf. This coating must be removed entirely before painting with a high-temp paint for final installation. Coating can be removed with lacquer thinner. Info
These S/B Chevy Clipster headers are for 1964-87 GM A*, F* and G-Body cars and fit many street rod applications with uni-body front clip suspensions. Clipster headers use longer primaries than Tight Tucks, yet shorter than full length headers. Collectors exit toward the rear of the engine compartment providing excellent ground clearance on "slammed" applications as well as clearing steering and suspension components.
1-5/8" primaries and 3" collectors. Fits straight or angle plug heads.
Header Sizing Chart (GIF)
WARNING: This header will require the use of Autolite 'short' style spark plugs OR NGK BR8ECM type plugs to be used for clearance purposes. No other plugs or shorty plugs offered other than Autolite branded 'shorty' plugs will clear.
Application This Part FitsApplications include, but not limited to:
- 1967-1981 Camaro
- 1968-1981 Chevelle, Malibu
- 1964-1988 El Camino
- 1968-1979 Nova
- 1970-1988 Monte Carlo
Summary: they look great, will keep to use later
Pros: Rugged Construction
Yes, I recommend this product.
100% happy Rated by Jon159 on October 08, 2014Summary: I have a small-block Chevy in my '67 Cutlass and had a hard time finding headers that would fit this application. I stumbled upon these headers and they fit perfectly. I thought the price was very reasonable and the delivery was just as promised.I will definitely recommend this product to others.
Pros: Fast delivery Perfect Fit Reasonably Priced
Yes, I recommend this product.
Check you r application carefully Rated by SeanT on September 02, 2010Summary: These are a nice product, HOWEVER, they are advertised as fitting a '64 and up GM "A" body. These WILL NOT fit a '64 - '66 A body as the driver's side header hits the front crossmember. I ordered a set for my '65 Malibu, and they do not fit. The box they came in clearly states "'67-'81 Camaro" They will fit '67-up models.
Pros: Comes with all necessary Hardware and gaskets Thick flange design
Yes, I recommend this product.
Related Items / Suggested Parts Small Block Chevy Clipster Headers, AHC Coated 1969-87 GM A/F/G Body SBC Shorty Headers, Manual Trans, Raw 1969-1987 Small Block Chevy Shorty Headers, Manual Trans, AHC Small Block Chevy Clipster Headers, Chrome Small Block Chevy Clipster Headers, Stainless ShippingCombined Shipping:
- Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
- Some products are too large for standard ground delivery and must be shipped via truck freight.
- Please contact us via eBay Message for a freight shipping estimate.
- When possible, please provide a business or commercial address for delivery to eliminate additional fees.
- Please ensure the phone number provided is accurate to avoid delays.
- Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise. Payment
- Accepted Payment Methods - PayPal and major credit cards are accepted.
- Terms - Immediate payment is required on all listings.
- To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.