Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

SUPER 16" REVERSIBLE ELECTRIC FAN 200 WATT # HC-7105 for Sale


Parts Search:
If you like this part use the Google +1 button:


SUPER 16

Price: $30

This item has been shown 6863 times.

Click HERE for more information about this part.


16 INCH REVERSIBLE SUPER HIGH OUTPUT ELECTRIC FANTRUE200 WATT OUTPUT

Thislisting is a must read!

THIS FAN IS VERY POWERFUL, LIGHT WEIGHT, AND EFFICIENT.3 1/2INCHES THICK AT THE CENTER, AND 2.2 INCHES AT THE TOP OF FRAME

MEASUREMENTS: 15 3/4" FLAT SIDE OF SHROUD, 16 1/4" ROUND SIDE OF SHROUD, 15" BLADE

You may see other 16 inch fans that have same measurements for depth, but they will not have this samemotor. Our Super 16 fan has a much taller motor, but to compensate for this, the fan frame profile is much lower than any 16 inch fan we have seen. Take notice in the picture above. The frame sits much lower than usual. This kept our fan at 3.5 inches maximum height, and that includes the center bearing hub of the motor.

Please read the complete ad

Lifetime warranty! This will be the last fan you will ever need.

THE TRUE CFM RATING IS 2350 THIS FAN HAS A VERY LOW AMP DRAW - 14 AMPS TO START AND 6-7 RUNNING. BALL BEARINGS IN THE FRONT AND REAR OF THE MOTOR. SKIP WHITE WOULD NOT HAVE CHOOSE THIS FAN IF IT WERE NOT THE BEST YOU CAN BUY. 200 WATT MOTOR. THERE ARE OTHERS ON THE MARKET SIMILAR, BUT THEY ARE NOT THE SAME. THOSE RATING CFM RATINGS CLOSE TO OR HIGHER THAN THIS FAN ARE USUALLY FALSE. WE RATE THE TRUE MANUFACTURES RATING. PLEASE READ THE COMPLETE ADD!.

This fan has a computer balanced blade for smoother operation.

Rest assured this fan is far superior to most others on the market.


We also include a fan mountingkit. As many of know you should always mount the fan in a staggered clock position to allow the fan to rest on a total of four of the radiator tubes rather than two. This can often cause the mounting hole to not line up with one or more of the tubes. These additional mounting holes give you a variance of choiceas they are spaced about half an inch apart.This fan is reversible, andcan be used as a puller or pusher.Fans that are mounted between the engine and radiator are considered pullers. Fans mountedbetween the grill and radiator are considered pushers. This fan is reversible. Establish the fans setup before installing.It is important to know thatto change the airflow direction you must reverse the blade and thepositive/negative polarity.Just reversing the polaritywillnot flow air in the opposite direction due to the blade pitch.Reversing the blade is a very simple task.

THIS IS A NEWLINE OF 16 INCH FANS. THEY ARE THE MOST POWERFUL 16 INCH FANS ON THE MARKET. REGARDLESS OF WHAT OTHERFAN MODELS CLAIM,THIS FAN IS SUPERIOR IN OUR OPINION.THECURVED COMPUTER BALANCED BLADE PUTS OUT AHUGE AMOUNT OF AIR, AND IS MUCH QUIETER THAN ANY WE HAVE SEEN.

Many sellers claim to have the best 16 inch fan on the market, we know this to be false. The fan that most others are selling pale in comparison.Ours has a much larger armature with brass brush holders, and the permanent magnets are at least 35% larger, and ourblade is computer balanced, and proof of this will be the occasional metal clips on some of the blades.This is the exact fanwe run on our company race car. Our car is a pro street car, and is drove to the track every week during race season, when we arrive to the track the waiting time in the staging lanes can be very lengthy. This is the type fan we can trust to not fail, and to have a high enough output to keep our 400 cubic inch 535hp engine perfectly cool. Many sellers make outrageous claims for no other reason than to have a superlative over other sellers. We have dealt with many fan manufacturers over the years and have found the 16 inch sizeto have the highest failure rate due to the bladesvery large rotational mass. They also have theworst vibration problems due to this largeblade, and excess vibration will destroy the motor before long.In the past wehave stopped sellingthe 16" fan due toour very lowtolerance to fan failure.Our search wentfrom onecompany to the nextlookingforwhat wehoped wouldbe a better 16"fan. Wellthe searchhas been successful, and our newSuper 16 inch fanis truly the best on the market.Itmay beslightly higher in price,but it is a muchbetter value.In short most low cost 16 inch fans on the market are very risky to use on your car,as the failure rate is high, and cfm output is marginal at best.

When wepublish the factory cfm ratingsof a given size fan we are selling, it's not long beforemany of our competitors will publish the same number or higher, yet they are selling the very same fan that once claimed lowercfm numbers. Wethen started to publish wattage ratings, and the same sellers suddenlystarted claiming the sameor even higher numbers. We know of one seller that has wasted no time in publishing what we suspect to be false wattage ratings, and they certainly don't have this fan. They are actually selling the fan we used to carry, and it has aslightly smaller motor. We can say one thing aboutall of this, forget any number ratings period, and let us just saythat our fan will dissipate the maximum amount of heatpossible from the thickestradiator coremade.The company that builds these also builds fans forfactorycars throughout the world.This is not a knock off of a goodfan, rather this is the fan the othersmake knockoffs from. We have nothing against knockoffs if they are good products, but when it comes to electric cooling fans, we have not seen anyone offer a good 16 inch size that we truly like till now. This is why we are offering a lifetime warranty on this fan.A commonly asked question about this fan is if it has ball bearings in it, and the answer is YES. It has them in the front and rear of the motor. Not a bushing, but a true set of ball bearings. As mentioned the brush holders are solid brass. When we tore into one of our old 16" fans that was returned for a failure, we noticed that the brush holders were made from plastic, and had melted into a blob. Now this may not have been the reason the fan failed, as the motor may have been creating to much heat due to the fact itwas insufficientin size, added to this the heat produced by the radiator and engine. Hard to say, but that fan was one of the lines we dropped after one too many failures. We will soon do a video clip showing us disassemble our fan alongside ofour competitors16" fan. The difference is dramatic in more ways than one. The two fansdo appear similar on the outside other than the much taller motor,but we were amazed at the difference inside. We were wondering why it weighedover a quarter pound more, yet appearedvery similar on the outside. This fan is amazing for the slight increase in cost.

Enough said

BRAND NEW IN THE BOX. FIRST LINE. MOUNTING KIT INCLUDED.

THIS FANIS REVERSIBLE. Lifetime Warranty

For Technical info or service related issues please call us at 423-722-5152

THIS FAN IS RATED AT2350 CFM. THIS IS MUCH MORE THAN MOST FACTORY FANS ON CARS AND TRUCKS. ANY HIGHER THAN THIS WOULD SURELY CREATE A HUGE AMPERAGE DRAIN ON THE BATTERY. I WOULD NOT PUT MUCH STOCK IN CFM RATINGS, AS THEY ARE OFTEN INACCURATE. WE CAN PROMISE YOU THIS FAN PULLS AND PUSHESAN ENORMOUS AMOUNT OF AIR ANDDOES HAVE A200 WATT MOTOR.

THE MEASUREMENTS ON THIS FAN ARE: 15 3/4 x 16 1/4 x 3.5, THIS IS NOT COUNTING THE MOUNTING TABS, BUT YOU CAN MOUNT WITHOUT THEM BY USING THE TAB SLOTS ON THE FAN FRAME IF NEEDED, OR SIMPLY ROTATE THE FANS CLOCK POSITION ON THE RADIATOR.

A RULE OF THUMB IS TO FIT THE BIGGEST FAN YOU CAN FITON YOUR RADIATOR. WE ALSO HAVE 10, 12 AND14 INCH FANS AVAILABLE.

It is very important to use a temp sensor, circuit breaker, and relay system with any electric cooling fan. We have many accessories for our line of fans in our other listings.

We will warrantyfan for life!No one has a warranty like this. We do stand behind our warranty. We have 40 years experience in the performance automotive business.

PAYMENT AND SHIPPING DETAILS

WE OFFER GREAT DISCOUNTS ON SHIPPING. YOUONLYPAY THE FULL SHIPPING FEEON THE HIGHEST SHIPPING COST OF YOUR ITEMS, AND HALF PRICE SHIPPING ON ALL ADDITIONAL ITEMS. FEW OFFER DISCOUNTS ON SHIPPING SUCH AS THIS.EMAIL US USING THE"ASK THE SELLER A QUESTION"TABIF YOU WOULD LIKE US TO CALCULATE YOUR SHIPPING COST ON MULTIPLE ITEM ORDERS.YOU MAY ALSO REQUESTAN INVOICE AT TIME OF CHECKOUT. IF YOU ARE UNABLETO CONTACT US BY EMAIL PLEASEGIVE US A CALL AT423-722-5152 FROM 8AM-8PM EASTERN TIME MON-FRI AND 10AM-3PM ON SAT.WE WILL ANSWER YOUR EMAILWITHIN THEONE BUSINESS DAYIN MOST CASES,SO KEEP SHOPPING AND PAY HALF PRICE SHIPPING ON ALL ADDITIONAL ITEMS. OUR CHECKOUT SYSTEM WILL AUTOMATICALLY CALCULATE YOUR SHIPPING DISCOUNT AT TIME OF PAYMENT,SO LONG ASYOU CONSOLIDATE YOUR PAYMENT.

If you checkout and start over, the auto calculator will not recognize the multiple purchases, and there will be no shipping discount. Should you decide to start purchasing again after checking out, you willneed to contact us so we can calculate your shipping for you.

IF YOU ARE HAVING DIFFICULTY PAYING WITH PAYPAL, FEEL FREE TO GIVE US A CALLAT 423-722-5152.SALES AND CUSTOMER SERVICEHOURS OF OPERATION ARE 8AM-8PMMON-FRI &10AM-3PM SAT EASTERN TIME ZONE

FOR TECH SUPPORT, PLEASE USE THE "ASK SELLER A QUESTION TAB". IT'S LOCATED AT THE TOP RIGHT HAND SIDE OF THIS PAGE. YOU MAY ALSO CALL FOR TECH SUPPORT IF YOUR UNABLE TO EXPLAIN WHAT YOU NEED IN AN EMAIL. TECH SUPPORT IS USUALLY NOT AVAILABLE UNTIL AROUND 11AM-7PM MON-FRI

FedEx is our primary shipper. Weare unable toship to APO/FPO addresses. Help us ship your order promptly by including your physical address at checkout.If your order MUST be shipped to a PO BOX, please contact us by phone. Additional charges may apply. Below is a map representing the estimated delivery time to get to youfrom our location.

FedEx Home Delivery delivers Tuesday - Saturday. If apackage leaves here on aThursday, and youare in a 2 day deliveryzone, your package will deliver to you on Saturday.If you are in a3 day zone, and your package leaves on aThursday, you will not receive it until Tuesday.Expedited shipping is available upon request for an additional fee. Please contact us forrates.

Hawaii and Alaska have a 6+ dayestimated delivery time.

The shipping quoted in this ad is only for the 48 continental United States. If shipping to anywhere else, please give us a call or email us for quotes. The half price shipping on all additional items also only applies to items that are being shipped in the 48 continental United States. If you have any questions, you may give a call at 423-722-5152

Pay with your credit card through PayPal, orif having difficulty feel free to call us at423-722-5152 or toll free at 877-383-5152




Follow DragTimes on Twitter
Share |


Similar 1/4 mile timeslips to browse:

1991 Audi 200 20v: 11.940 @ 115.110
Nick Sgambelluri, Engine: Stock, Turbos: Garrett GT3076r Tires: General UHP 225-45-17


2011 Chrysler 200 S: 14.386 @ 94.750
D. Sokol, Tires: Michelin Pilot Super Sports


2011 Chrysler 200 s: 14.405 @ 96.150
D. Sokol,


2011 Chrysler 200 S: 14.557 @ 95.990
Charlie Lindstrom, Engine: 3.6L Pentastar V6, Supercharger: none Turbos: none Tires: Cooper Zeon RS3-A (P225/45R18)


2011 Chrysler 200 Touring: 14.651 @ 92.940
MichaelC, Engine: 3.6 Liter Pentastar V6, Supercharger: n/a Turbos: n/a Tires: Factory Goodyear Eagle LS-2 Touring 225/50R18 All-


1991 Audi 200 20-valve turbo quattro: 14.700 @ 95.000
Ralph, Engine: 2.2l 5-cylinder, Supercharger: No Turbos: Yes indeed


1991 Audi 200 20V QUATTRO: 14.890 @ 92.210
CHRIS ALLEN, Engine: 2.3L 20V, Supercharger: NA Turbos: STOCK Tires: STOCK


1989 Audi 200 10v Turbo: 15.798 @ 84.650
Rasmus Rydstrom, Engine: 2.2 i5 10v Turbo, Supercharger: none Turbos: K26 Tires: 205/60/15s - Stock



©2014 DragTimes - Disclaimer