Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

FRONT+REAR 4 PERFORMANCE DRILLED SLOTTED BRAKE ROTORS AND 8 CERAMIC PADS M400534 for Sale


Parts Search:
If you like this part use the Google +1 button:


FRONT+REAR 4 PERFORMANCE DRILLED SLOTTED BRAKE ROTORS AND 8 CERAMIC PADS M400534

Price: $242

This item has been shown 2960 times.

Click HERE for more information about this part.

Untitled Document Toll Free (877) 477-9320 FRONT and REAR BRAKE KIT

Includes:
- 2 Front and 2 Rear cross drilled and slotted rotors
- 1 Front and 1 Rear set of performance ceramic pads
-

Pontiac GTO 2005 - 2006 CROSS DRILLED AND SLOTTED ROTORS BY KINETIC RACING

Kinetic rotors are machined from the finest G3000 grade castings the ideal balance between tensile strength and hardness.

PERFORMANCE CERAMIC PADS

Kinetic Ceramic Pads offer superior resistance to fade without the noise and dust associated with metal pads.

CHAMFERED AND SLOTTED LIKE THE OE PAD THERMAL SCORCHED FOR FAST BREAK-IN More Stopping Power Than Other Leading Brands
FASTER STOPS!

Cross drilled rotors can improve stopping power up to 35% over stock rotors as reported in SAE Technical Paper 2006-01-0691 "The Effect of Rotor Cross-drilling on Brake Performance". That is why Corvette, Porsche, Mercedes and BMW vehicles come factory direct with drilled brake rotors, i.e. not dimpled or slotted. The fact is that the drill holes greatly improve convection heat transfer and the result is more pad bite. The report also states that "it is possible to have too many holes, in which case too much cooling air would be lost before reaching the hottest part of the rotor". Kinetic rotors are designed for optimum rotor cooling and durability with one cooling hole per vane. This also provides superior strength to avoid cracking.

STOP ROTOR WARPING!

High rotor temperature can cause heat spots to form in the rotor, and this causes pulsating brakes. Cross drilled rotors keep the brakes up to 150 degrees cooler to prevent rotor warping.

GENUINE KINETIC CERAMIC BRAKE PADS!

Most vehicles come with ceramic pads from the factory. Kinetic's pads are the perfect replacement for serious street performance. All pads are made using positive mold technology for quiet, consistent braking. Pads are chamfered and slotted like the OE, and come with dual layer rubber shims.

Brakemotive is one of the largest brake suppliers in North America, with over 100,000 satisfied customers. We only sell premium performance brake kits to assure the very best quality. Because of our large volume, we can offer steep price discounts. In most cases, the delivered price of our performance rotor and ceramic pad kit is at or below the cost of equivalent plain rotors and pads from your neighborhood retail store.

Our engineering team uses advanced CAD (computer aided design) software to configure the drill holes and slots for optimum braking. We machine the rotors with state-of-the-art CNC (computer numerical controlled) machines in our mid-west plant with strict quality control. We guarantee a perfect fit to your vehicle, but please check the fitment information in this listing before you order. We never request a restocking fee if you do order the wrong parts.


Brakemotive has lightning fast shipping, in fact over 98% of our orders ship within one (1) business day from our 70,000 square foot mid-west warehouse. Fedex will deliver packages to your door including Saturday. Fedex shipping takes 1 to 4 days depending on your location. We always e-mail your tracking information (to your registered e-mail) as soon as it ships.


The Brakemotive team members are available to answer your questions Monday through Friday 8:30AM CST to 6:00PM CST and Saturday through Sunday from 9:30AM CST to 4:30PM CST. If you can't find the parts for your vehicle, just give us a call. Toll Free (877) 477 9320 Brakemotive warrants to the original purchaser of this product, that this product will be free from defects in materials and workmanship for a period of six months (6 months) from the date of purchase or for 6,000 miles of use of the brake rotor or brake pads, whichever occurs first. Warranty does not cover normal wear and tear or damage caused by negligence, lack of maintenance, abnormal operation, track racing, off-road use, or improper installation. If a defect in workmanship or materials is found in a product that has been properly installed, in the type of vehicle these parts are cataloged for and such product has been returned to Brakemotive within such six months from date of purchase, the product will be exchanged. The customer is responsible for freight charges in regards to warranties. The warranty is non-transferable.

You are required to receive a RMA (Return Merchandise Authorization) number and return instruction from us before you return any item. Any return without a RMA number could be refused. Customers are responsible to return the defective item to Brakemotive for all warranty claims. Brakemotive will be responsible for freight for defective parts that are inspected by us and are determined to be defective per our published policy. No additional fees for installation or any other cost will be reimbursed with warranty claim. Only one warranty claim is allowed per customer. Brakemotive neither makes nor implies any other warranty as to suitability for purpose other than expressly warranted here and is not liable for any form of consequential damage losses or cost. All parts which are returned for a reason other than warranty are subject to a 15% restocking charge.

Shipping is FREE to the 48 contiguous states. There will be a $240.00 (USD) shipping cost for shipments going to Hawaii, Alaska and Puerto Rico. Shipping cost to Canada will be $115.00 (USD); this cost includes all taxes, and brokerage fees. For shipments to Illinois addresses, we are required to collect 8.75% sales tax. We cannot ship to PO boxes, if you place and order with us and the address on your account is to a PO Box the parts will not ship until we receive a physical address from you. We apologize, but we are unable to ship to APO addresses.

We prefer PayPal and accept all major credit cards.

Are the drilled holes and slots directional?

Yes, the rotors are machined based on their orientation on the vehicle. Driver's side (left) and passenger's side(right) have unique patterns so the slot trails toward the back of the vehicle.

CLICK HERE for guide.

How many pads come in a "set"?

On listings for front or rear only, one set refers to four individual brake pads, enough for the entire front or rear axle of the vehicle. Front and rear kit listings come with eight individual brake pads, enough for all four wheels of the vehicle. Please note that some applications such as Audi and Corvette, among others, have a unique number of pads based on their caliper design, e.g. a Corvette Z06 set is 12 brake pads for the front and 8 brake pads for the rear. The important thing to understand is that a "kit" refers to all the parts for the application specified, I.e. front is two complete front wheels; front and rear is four complete front and rear wheels.

Are any modifications necessary to make these rotors fit my vehicle?

No modifications or alterations are needed in order to install our brakes. All parts are designed to be direct original equipment replacement parts with simple bolt-on installation.

Is the brake rotor picture the same as the rotor I will receive?

The photo in the listing is a generic representation of the item you will receive. With over 1700 different part numbers, it is not possible for us to post unique pictures for each application due to graphic storage space limitations. The purpose of the image is for visual representation of a typical patter of the machined drill holes and slots as well as the silver zinc surface finish.

Will I get tracking information?

Yes, tracking information is automatically sent to your email address when the items have been shipped. After payment has cleared, handling time is one (1) business day. So, you will typically receive the e-mail from FedEx within 24 hours of the order being shipped. Please check your junk mail box for the Fedex tracking information as it sometimes ends up there.

How do I know if I have Solid Rotors or Vented Rotors?

CLICK HERE for guide.

What causes rotor warping?

CLICK HERE for guide.

Drilled vs slotted rotors, what is better?

CLICK HERE for guide.

Metallic vs Ceramic Brake Pads.

CLICK HERE for guide.

Jeep Grand Cherokee - Do I have Akebono or ATE/Teves front calipers?

CLICK HERE for guide.

Toyota Trucks - Do I have ST3WE or 13WL Calipers?

CLICK HERE for guide.


Follow DragTimes on Twitter
Share |


Similar 1/4 mile timeslips to browse:

2003 Ford Ranger Full Tube Chassis: 7.414 @ 183.980
Don Nase Jr, Engine: 2.3 Liter, Turbos: Single


1979 Chevrolet Malibu : 8.532 @ 159.100
Todd Geisler, Engine: 582ci BBC, Tires: Hoosier DOT Drag Radial 295/65-15


1978 Chevrolet Malibu : 9.023 @ 148.970
scott lorenzen, Engine: 496 bb chevy, Tires: 17.5 x 32 et streets


1978 Chevrolet Malibu : 9.410 @ 143.000
Tug Brock, Engine: 488 BBC,


1987 Suzuki Samurai : 9.460 @ 138.000
Yiyito Deliz, Engine: 1,324cc, Supercharger: none Turbos: T3/T4 Custom turbo Tires: front M/T 24x5 rear M/T 26x10 slicks


1978 Chevrolet Malibu : 9.510 @ 142.700
todd pasch, Engine: Dart 540, Tires: m/t29,5x13.5x15


1983 Ford Ranger short wheelbase: 9.690 @ 119.000
Robert, Engine: 408, Tires: 11.00


1979 Chevrolet Malibu Coupe: 9.710 @ 135.000
Garrett Porter, Engine: 426 cubic inch Chevy small block, Supercharger: none Turbos: none Tires: Hoosier


1984 Ford Ranger : 9.710 @ 136.000
, Engine: 331,


1965 Chevrolet Malibu ss: 9.840 @ 139.230
MIke stevenson, Engine: chev sb 355, Tires: mickey thompson et street


1978 Chevrolet Malibu : 9.903 @ 135.970
Jerry, Engine: 496, Tires: 31x13 Phoenix


1987 Ford Ranger : 9.943 @ 132.520
Jay Taylor, Engine: 351 Windsor, Supercharger: Nope Turbos: Nope Tires: Mickey Thompson ET Drags


1979 Chevrolet Malibu 2 door: 9.975 @ 135.540
todd myers, Engine: 496 bbc, Tires: 28x10.5 15 mickythompson


1989 Ford Ranger : 9.980 @ 135.480
Roughcut Racing Ranger, Engine: 408 Windsor (All Motor), Supercharger: Nope Turbos: Nope Tires: 31*12.5*15 MT rear / Hooiser 26/3.5 Front


1979 Chevrolet Malibu station wagon: 10.000 @ 115.450
jim bowling, Engine: 383 s/b chev, Supercharger: none Turbos: none Tires: m/t 29.5x9x15


1978 Chevrolet Malibu classic: 10.080 @ 130.000
dennis cantrell, Engine: 414 small block, Supercharger: no Turbos: no Tires: 14x32x15


1982 Chevrolet Malibu Station Wagon: 10.201 @ 127.660
Ian Carlo Rodriguez, Engine: 1987 Buick 3.8 S.F.I., Turbos: (1) 70 - 1 Tires: M/T 28x4 F & 29.5x10.5 R


1979 Chevrolet Malibu : 10.325 @ 132.150
jeremy redmond, Engine: 377 sbc, Tires: 32/14


1979 Chevrolet Malibu Classic: 10.392 @ 126.150
Dave Cook, Engine: 406 Smalllock, Supercharger: no Turbos: no Tires: 9


1979 Chevrolet Malibu : 10.410 @ 127.000
MIKE JONES, Engine: 439 ci bb chevy, Supercharger: nope Turbos: nope Tires: good years



©2014 DragTimes - Disclaimer