When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $24.77
Compatible with: 2002 Toyota MR2 Spyder
Bring your 2002 Toyota MR2 Spyderout of the dark ages and back into the modern era!
Please Note: Your Original Toyota key fob must have a red LED light on the top. If your original key fob does not have the red LED light this key fob will not work for your vehicle. Your key fob must also be the same shape as the picture in our listing. This key fob is for Dealer Installed RS3200 Keyless Entry SystemsKey fob, car remote, clicker thingy, key bob… We\'ve heard it called just about everything under the sun. No matter what you call it, one thing is certain: life is just a little bit sweeter when you can lock and unlock your car with the push of a button. Let\'s face it, it\'s the 21st Century and no one has time to fumble with caveman technology trying to stick a key into a lock to get into their car. Once you receive your new key fob simply program it to your vehicle and you\'ll be sliding in and out of your car with ease just like the rest of the cool kids.Questions? Call us at [phone removed by eBay]
Programming Instructions2002 Toyota MR2 SpyderObtain all remote transmitters for this vehicle
1. Start with the key out of the ignition, drivers door isopen, all other doors and trunk closed and drivers door is unlocked.
2. Perform these steps within 5 seconds. A. Insert the keyinto the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into theignition (Do NOT Turn it) and Pull key out.
3. Perform these steps within 40 seconds. A. Close then openthe drivers door. B. Close then open the drivers door. C. Insert the key intothe ignition (Do NOT Turn it) and Pull key out.
4. Perform these steps within 40 seconds. A. Close then openthe drivers door. B. Close then open the drivers door. C. Insert the key intoignition and leave it in the ignition. D. Close the drivers door. E. Turn theignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove thekey from the ignition.
5. Within 3 seconds, the power door locks should lock thenunlock automatically indicating successful entry into programming mode. Returnto step 1 if the door locks do not cycle at this point.
6. Perform these steps within 40 seconds. A. Press the lockand unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediatelyafter letting go of the lock and unlock buttons, Press the lock button byitself and hold for 2 seconds. Within 3 seconds, the door locks should lock andthen unlock once indicating successful programming. If the door locks cycletwice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeatsteps A and B in step 6 for each new remote.
7. Open drivers door.
Powered by Solid Commerce,
The All-in-One Listing, Inventory & Order Management Solution for Online Merchants