When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $315.00
Mustang 5.0 GT40 Style Upper and Lower Intake Manifold Set WITHOUT EGR and all hardware. This is the same style that Ford sold through the Ford Racing Catalog. These should fit 5.0 Mustangs from 87-93, and 94-95(these will require an intake elbow adapter. $70 from Summit) and from what I am told, 94-95 doesn\'t need an EGR ported intake because the EGR is in the intake elbow. Again, this unit is NOT ported for EGR. This is great if you don’t need the EGR, because these units run cooler and make a slightly higher amount of torque from the EGR Style. I clean these up and sell them as a hobby. I do NOT intentionally paint over grease and dirt like some intakes for sale (if that happens with one of my intakes it is an accident). Should be ready to bolt on and go! It\'s hard to find these things this clean and in good condition! Why waste your money on a filthy intake that you don’t know if the threads are damaged or about any other damage? That being said, I do not advertise a “perfect” intake.
These are pressure washed, tanked, and scrubbed by hand before painting. Lower intakes that have NOT been glass blasted are pressure washed and cleaned by hand. If pitting has become too severe, I have the intake machined. ALL THREADS HAVE BEEN CHECKED AND/OR CHASED! This protects me as well as you. You know you are getting an intake free of defects, I know that if anything happens with threads, its due to improper installation. Keep in mind that you are buying a USED intake and that some pitting and imperfections cannot be removed. Pictured is the actual intake that you will receive. The upper is a high gloss black and the lower is a metallic silver. I really like how the finish turned out on this one. I included a picture of where one vacuum tube had been cut short and capped, and the EGR cooler tubes have been capped. Both have been painted over but and are generally NOT used on a Mustang swap. I just try to include everything. The plaques are painted by hand, so please don\'t judge me too badly! If there are ANY questions, please ask them before bidding/buying. If you need an additional picture, a question, a concern, please just ask! I do not accept returns and I do try to describe each one the best that I can. I recommend the higher performance intake gaskets as they are thicker and seem to seal better with used intakes. Again, PLEASE ask any questions ahead of time before bidding/buying.
These things are heavy (42lbs) so shipping is rough, but I usually absorb a good chunk of it. I’ve found that packaging them myself and shipping them FedEx seems to be the cheapest (usually right at $45). If you would like FedEx to package it for you, they charge around $120. Low ball offers will be ignored and offers are often determined by your shipping location. Message me for local pickup (as well as obviously not having to pay shipping). Thanks for looking and have a great day!
I also fly from Monday evenings until Thursday evenings. Any items purchased during this time window will be immediately shipped out Friday morning. Thank you for looking.