Mishimoto Front Mount Intercooler Kit, Black, for Subaru WRX/STI 01-07 for Sale

Price: $940

This item has been shown 662 times.

Click Here to Visit Our Store Mishimoto Front Mount Intercooler Kit, Black, for Subaru WRX/STI 01-07

  • Part #: MMINT-WRX-01BK

Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto WRX/STI Front-Mount Intercooler Kit will provide your Subaru with the ability to make the most horsepower and torque possible. This front-mount intercooler was designed with a large, 28" intercooler core that provides the maximum cooling capability without excessive pressure drops that will wear out any turbocharger over time. The intercooler features smooth cast end tanks that are CFD tested for maximum airflow with no sharp walls or bends from cut-and-weld end tanks that disrupt airflow. The intercooler provides the best airflow and heat exchange properties for those time attack laps, or a 10-second blast down the quarter mile. The Mishimoto Subaru WRX/STI Front-Mount Intercooler also features four mandrel-bent aluminum pipes for optimum airflow. The hot-side pipes are 2.25" in diameter to keep airflow velocities high, giving your car instant response without excessive throttle lag that plagues many front-mount intercooler designs. The cold side of the system features 3" mandrel-bent aluminum tubing designed for maximum airflow and to match the diameter of your throttle body. The kit is compatible with both stock and aftermarket bypass or blow-off valves.The kit contains everything needed for a worry-free installation, including an application-specific crash bar that both supports the intercooler and mounts to existing points on the vehicle. No cutting or drilling is required to install the crash bar and intercooler. The kit also includes all necessary mounting brackets, including a resistor block relocation bracket to move the resistor block out of the way of the intercooler piping. All mounting brackets will come with applicable hardware, zip ties, and thermal wrap. The kit also includes every coupler and clamp needed for a clean install. For larger-than-stock turbos, Mishimoto has included a larger turbo hot-side pipe that will fit turbochargers with an outlet of 2"–2.13". As an added bonus, we've engineered the Mishimoto Subaru WRX/STI Performance Air Intake as an additional option to work perfectly with this intercooler kit and provide a rich and aggressive intake tone. Mishimoto tested this intercooler on our 320 whp STI to find significant drops in AITs (air intake temperatures), and the intercooler has also been flow tested to over 600 whp! This kit is available with either a Sleek Silver or Stealth Black color and includes the Mishimoto Lifetime Warranty

  • Fits the 2001–2007 Subaru WRX/STI
  • Intercooler design optimized for maximum flow, and smooth cast end tanks allow the best possible airflow in and out of the intercooler
  • Optimal core design for maximum cooling efficiency with minimal pressure drop
  • Flow rated to approximately 700 whp/30 psi of turbo boost (See Tech Specs below)
  • Includes all necessary hardware, brackets, and accessories
  • Also fits right-hand drive models
  • Available in Sleek Silver or Stealth Black
  • Works with stock bypass valve or aftermarket blow-off valve
  • Mishimoto Lifetime Warranty

Cooler Overall Size
44" x 9.00" x 5.5"Cooler Core Size
28" x 8.25" x 3.5"Crash Bar Specs
– Steel construction with black powdercoat
– Application-specific mounting holes
– 6.5 lbsHot-Side Intercooler Pipe Specs
– Made from polished mandrel-bent aluminum
– 2.25" I.D.
– Includes upper and lower intercooler pipesCold-Side Intercooler Pipe Specs
– Made from polished mandrel-bent aluminum
– 2.75" I.D.
– Includes upper and lower intercooler pipesPurchase Includes
(1) Bar-and-Plate Intercooler
(1) Steel Crash Bar w/ Mounting Hardware
(2) Hot-Side Intercooler Pipes
(2) Cold-Side Intercooler Pipes
(1) BPV Flange Adapter
(1) Resistor Block Relocation Bracket w/ Mounting Hardware
(2) Lower Intercooler Brackets w/ Mounting Hardware
(1) Aluminum Overflow Can w/ Mounting Hardware
(1) Turbo to Hot Pipe Coupler (for stock turbo)
(1) Turbo to Hot Pipe Coupler (for aftermarket turbo)
(1) 2.25" Straight Coupler
(2) 2.75" Straight Couplers
(1) 2.75" x 3.25" Long Straight Coupler
(1) 2.00"-2.75" Transition Coupler
(1) BPV Recirculation Hose
(1) PCV hose
(1) 2.00" T-bolt Clamp
(4) 2.5" T-bolt Clamps
(7) 3" T-bolt Clamps
(1) 1.5" Worm-Gear Clamp
(1) Bypass Valve Gasket
(1) Black Nylon Hose Fitting, 3/4" I.D.
(1) Black Nylon Tee Hose Fitting, 3/4" I.D.
(1) 12" of Thermal WrapNote
Mishimoto recommends that this intercooler kit, with or without the optional air intake, is not used with the stock ECU programming. It is highly recommended that the customer is able to retune the vehicleÍs ECU after installing the intercooler kit. Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle.This kit is rated for approximately 700 whp, or 30 psi of turbo boost. Exceeding these horsepower or pressure limits may require a custom-sized front-mount intercooler.Cooler Inlet / Outlet
2.75" I.D. / 3.00" O.D.Cooler Weight
25.5 lbsCooler Tank Wall Thickness
3.5mmCooler Construction
Bar-and-plate with cast end tanksAlso Fits
02–07 Subaru WRX
04–07 Subaru STI
05–06 Saab 9-2x AeroEngine Codes
GGTurbo to Hot-Side Hose Specs (for Stock Turbo)
– 1.875" I.D. / 2.20" O.D. – On turbo outlet
– 5mm hose thickness
– Withstands up to 400°F (204°C) temps
– Fits on turbos with 1.97" (50mm) maximum compressor outlet sizeTurbo to Hot-Side Hose Specs (for Aftermarket Turbo)
–2.00" I.D. / 2.40" O.D.–On turbo outlet
– 5mm hose thickness
– Withstands up to 400°F (204°C) temps
– Fits on turbos with 2.25" (57mm) maximum compressor outlet sizeIntercooler pipe to throttle-body coupler specs
– 3.25" Length
– 2.75" I.D.
– 3.00" O.D.
– 4mm thickBPV Hose Specs
– Application-specific bend for this kit
– 1.25" I.D.
– 1.50" O.D.
– 4mm thickPCV Hose specs
– 17.5" length
– 0.45" I.D.
– 0.75" O.D.
– 4mm thick

ABOUT We have access to a very large product line. If you have any questions regarding this item or any others please contact us thru messages to insure a prompt reply. PAYMENTS Paypal is our preferred and only method of payment.
Items shipping to Florida are subject to 7% Sales Tax. Warranty Info: All warranties, if any, are offered by the manufacturer. Any defect or warranty claims are handled direct with the manufacturer. SHIPPING NOTE: ** Orders may be shipped signature required due to value or contents. If signature required is a concern please contact us BEFORE ordering for further details. **
All items ship within 1 business day and tracking information is uploaded to .
We ship from multiple warehouses around the country to insure the quickest delivery possible.
Orders are processed nearly instantly to insure quick delivery. Should you need to make any changes to your order please notify us immediately, we are unable to make changes once an order is processed. RETURNS Please contact us directly for any return inquiries, due to recent changes in 's system we are no longer able to process returns with 's return tool. Returns are only accepted in cases where an item is received not as described in the listing description. Items delivered exactly as described in the listing are not accepted as returns.
Items that are closeouts, open box, discontinued, wheels, or any engine internals are not returnable. Please ask any questions in advance of purchase to insure this item will properly fill your needs.
  • NO RETURNS ARE ACCEPTED WITHOUT AN RMA. Do not return any item without receiving an RMA/return shipping instructions.
  • A 20% Restocking Fee applies to any items returned in any condition other than brand new unopened resellable condition.
  • If ordering a universal part keep in mind that by nature, they are not designed for any specific vehicle and may require custom work to fit your particular vehicle. Universal parts cannot be returned for reasons of incorrect fitment as there is no specifically intended fitment for universal items.
Warranty Info: All warranties, if any, are offered by the manufacturer. Any defect or warranty claims are handled direct with the manufacturer. If warranty submission info is needed feel free to contact us for info.

Parts Search: