When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $687.95
Click Here to Visit Our Store Mishimoto Downpipe for Subaru WRX, 2015+, Manual 6 Speed, Includes Cat (Catted)
- Part #: MMDP-WRX-15CAT
Mishimoto is proud to release the performance Subaru WRX downpipe for the 2015+ models. The biggest restriction in the stock exhaust system is the downpipe. By installing the Mishimoto WRX downpipe, the FA20DIT exhaust system is able to breathe easier, providing a significant increase in horsepower and torque when tuned. During countless dyno pulls, Mishimoto saw gains of up to 73 whp and 64 wtq with the catted downpipe, Mishimoto Subaru WRX Tuning Kit, and Mishimoto Subaru WRX Performance Air Intake using 93 octane fuel on the 6-speed WRX (see additional images for dyno chart). With the catted downpipe and Mishimoto Subaru WRX Tuning Kit, Mishimoto saw dyno proven gains of up to 57 whp and 52 wtq using 93 octane fuel on the 6-speed WRX (see additional images for dyno chart). Above all, this downpipe provides a significant torque improvement in the low end and across the entire power band. The Mishimoto 2015 WRX downpipe provided an extremely aggressive turbo and exhaust tone under acceleration and boost, giving you that aggressive tone you have been looking for!
The engineers at Mishimoto designed the WRX downpipe as a one-piece design with precision TIG-welded 304 stainless steel. This allows uninterrupted exhaust flow from the 3.5\" 4-bolt exhaust flange all the way through the 3.0\" downpipe. The engineers also created two different transmission-specific brackets, for the 6-speed manual and CVT, to mount the downpipe to the transmission. To customize the WRX downpipe even further, it is offered in either a catted or catless version. Because the engineers know that WRX owners commonly like to add wideband O2 gauges, they included an additional O2 sensor bung and plug in an ideal location for aftermarket wideband sensors! To top it off, the 2015 WRX downpipe includes new turbine housing studs and nuts (which commonly strip), a new turbo outlet gasket, a new 3 2-bolt flange gasket, and all stainless steel hardware, so you dont have to worry about rust on your hardware. The Mishimoto Subaru WRX Downpipe is proudly made in the USA and comes with the Mishimoto Lifetime Warranty you know and trust.
- **NOTE: This listing is for the 6 Speed Manual Catted Downpipe, for other applications please see our other listings.**
- Direct fit for the 2015+ Subaru WRX and 2014+ Subaru Forester XT
- Dyno-proven gains of up to 57 whp and 52 wtq with catted downpipe and Mishimoto Subaru WRX Tuning Kit, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)
- Dyno-proven gains of up to 73 whp and 64 wtq with catted downpipe, Mishimoto Subaru WRX Tuning Kit, and Mishimoto Subaru WRX Performance Air Intake, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)
- Significant torque improvement in the low end and across the entire power band
- Fits with both CVT and manual transmissions
- Extremely aggressive turbo and exhaust tone under acceleration and boost
- 304 stainless steel one-piece design allows for uninterrupted exhaust flow
- 3/8\" thick stainless steel, CNC-machined four-bolt flange
- 3.5\" to 3.0\" transition out of turbo outlet allows exhaust gas to flow smoothly
- Additional wideband oxygen-sensor bung and plug-in ideal location for aftermarket wideband sensors
- Mates with the stock cat-back exhaust
- New studs for turbine housing
- High-flow catalytic converter (optional)
- Includes stock gasket for turbo outlet
- Made in the USA
- Mishimoto Lifetime Warranty
Pipe Material
304 Stainless SteelFlange Material
304 Stainless SteelDiameter
3.5\" at Turbo Flange
3.0\" From First Bend to End of PipeOverall Size
65\" x 12\" x 5.5\"Weight
18 lbs (with cat)Catalytic Converter Material
409 Stainless Steel
(only equipped on catted downpipe)Chassis Codes
VAEngine Codes
FA20DITFits
15+ Subaru WRX
14+ Subaru Forester XTPurchase Includes
(1) Stainless Steel Downpipe w/ 4-Bolt Turbo Flange and 2-Bolt Cat Flange
(1) Stainless Steel Transmission Bracket (Manual or CVT)
(1) High-flow Catalytic Converter (Optional)
(1) Additional M18 x 1.5 O2 Bung with Plug
(1) 4-Bolt Flange Gasket
(1) 2-Bolt Flange Gasket
(4) M10 x 1.25 Exhaust Studs
(2) M10 x 1.25 x 40mm Hex Bolts, Stainless Steel
(6) M10 x 1.25 Serrated Flange Nuts, Stainless Steel
(2) M10 x 1.25 x 16mm Hex Bolts (w/ 5mm Head Height), Stainless Steel
(4) M10 Washers, Stainless Steel
(2) M8 x 1.25 x 20mm Flange Bolts, Stainless Steel
(1) M6 x 1.0 x 10mm Flange Bolt, Stainless Steel
Mishimoto Lifetime Warranty
Note
This product has been designed to fit both manual and CVT transmission vehicles. Customers must select the correct transmission in the drop down menu to receive the correct bracket.Note
The downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle\'s ECU after installing the downpipe. We offer the Mishimoto Subaru WRX Tuning Kit, programmed specifically with Mishimoto products. Power gains will vary depending on the type of ECU tune that is applied to the vehicle.The Mishimoto catless downpipe is for track and off-road use only. The customer must have a professional engine tune/calibration after installing the catless downpipe.Customers installing the Mishimoto catted downpipe and Mishimoto EcuTek tune/calibration must remove the stock boost pill in the wastegate vacuum hose. The Mishimoto tune/calibration has been optimized to work with this combination and will prevent boost spikes. The hose which requires this modification is next to the wastegate actuator. The boost pill can be easily removed and replaced with a screwdriver or pliers. For additional technical information, please contact Mishimoto Technical Support.Customers installing the Mishimoto catted downpipe and professional engine tune/calibration must consult with their tuner for recommendations on how to handle the boost pills.The catalytic converter is manufactured using 409 grade automotive stainless steel. This particular grade of stainless has the tendency to form a protective layer of surface rust in wet/humid/snowy climates or when exposed to salted roads. This layer is superficial and will not penetrate the metal itself. It can be removed using soap and water and a steel Brillo or S.O.S pad. In the rare event that 409 stainless steel pipes become rusted through, Mishimotos lifetime warranty will cover replacement.
ABOUT We have access to a very large product line. If you have any questions regarding this item or any others please contact us thru eBay messages to insure a prompt reply. PAYMENTS Paypal is our preferred and only method of payment.
Items shipping to Florida are subject to 7% Sales Tax.Warranty Info: All warranties, if any, are offered by the manufacturer. Any defect or warranty claims are handled direct with the manufacturer. SHIPPING NOTE: ** Orders may be shipped signature required due to value or contents. If signature required is a concern please contact us BEFORE ordering for further details. **
All items ship within 1 business day and tracking information is uploaded to eBay.
We ship from multiple warehouses around the country to insure the quickest delivery possible.
Orders are processed nearly instantly to insure quick delivery. Should you need to make any changes to your order please notify us immediately, we are unable to make changes once an order is processed. RETURNS Please contact us directly for any return inquiries, due to recent changes in eBay\'s system we are no longer able to process returns with eBay\'s return tool. Returns are only accepted in cases where an item is received not as described in the listing description. Items delivered exactly as described in the listing are not accepted as returns.
Items that are closeouts, open box, discontinued, wheels, or any engine internals are not returnable. Please ask any questions in advance of purchase to insure this item will properly fill your needs.
- NO RETURNS ARE ACCEPTED WITHOUT AN RMA. Do not return any item without receiving an RMA/return shipping instructions.
- A 20% Restocking Fee applies to any items returned in any condition other than brand new unopened resellable condition.
- If ordering a universal part keep in mind that by nature, they are not designed for any specific vehicle and may require custom work to fit your particular vehicle. Universal parts cannot be returned for reasons of incorrect fitment as there is no specifically intended fitment for universal items.