MSD Complete Fuel and Ignition Kit - Mopar 383-400 - Atomic EFI/6AL/Distributor for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $2959.99

Your browser does not support JavaScript.To view this page, enable JavaScript if it is disabled or upgrade your browser.
Click Here. Double your traffic. Get Vendio Gallery - Now FREE!
We put together a complete Fuel Injection and Ignition System for a Mopar 383-400 Big Block here at SK Speed!

This listing is for a new MSD Ignition Atomic EFI System (part # 2900). We combined it with our popular 6AL Full Ignition Kit for Big Block Mopar engines to take car of all your Fuel and Ignition needs!WE ARE OFFERING FREE UPS GROUND SHIPPING WITHIN THE CONTINENTAL USA!


This is the complete kit for anyone planning to convert from a carburetor to Atomic EFI. You get the Throttle Body, Power Module (with Wide Band O2 sensor), Handheld Controller, and the Standard Fuel Kit for up to 525hp (at the crank).

Included in this MSD Atomic EFI System:

Throttle Body

The crown jewel of the Atomic EFI system is of course the throttle body itself. Our Engineers have countless hours in designing the unit with great performance and appearance. the compact design is similar in size to a carburetor, yet contains an Electronic Control Unit, four injectors, the Idle Air Control solenoid, TPS, MAP, Intake Air Temperature (IAT) and more. It's easy to overlook all of the details so let's have a closer look-


Power Module

The Power Module is a remote mounted item for the Atomic that handles all the high current loads. MSD’s CAN-Bus technology allows for a single, clean connection between this unit and the throttle body mounted ECU.

  • CAN-Bus
    These two ports are for MSD’s CAN-Bus technology. Just plug in the throttle body and the handheld controller and you are ready to go – nothing complicated! Best of all, these two ports are interchangeable, so don’t worry about which plug goes where.
  • Wiring
    Most of the wiring for the Atomic comes through this loom. This includes the Fuel Pump power (no relay required!), two fan controls, Wide Band 02 sensor, 12 volt switched, andpower and ground.
  • Mounting
    The Power Module for Atomic can be mountedalmost anywhere you like. Of course, we’d love to see you put it front and center on the fire wall, but if you would rather have it tucked out of sight that works too. Just make sure it protected from much water andhas a little air flow.


Handheld Controller

This little device is how you communicate with the Atomic. The initial setup takes about 5 minutes to ask a few basic questions about your engine. After that, the handheld serves as a dash for you to see all that is happening in your engine!

  • Use
    MSD knows the Handheld must be easy to use. This wasn’t made for a rocket scientist or a software engineer, the handheld is in plain English for the car enthusiasts that will use it. In the Initial Setup, you’ll answer six questions about your engine likeCubic Inches, Number of Cylinders, and your desired rev limit.
  • Dash
    After the Setup is complete, you may think theHandheld is useless; not so! The Dash function of this device can serveyou any time you want to know what’s happening in the engine. From exact Air Fuel Ratio readouts to Engine Coolant Temp, this set up tells you everything you want to know about your engine.
  • Data and Diagnostics
    The data Atomic gathers doesn’t just disappear after you look at it on the dash. If ever an issue arises, the Diagnostics feature will display alerts and save them for up to ten starts to let you come back and see what is going on.


Standard Fuel Kit

MSD’s standard fuel kit is kept simple thanks to Atomic’s built in fuel rails and returnless design – less hardware to put together and less fuel line to run. All you need for this kit is included – PWM Fuel Pump (MSD PN-2225), Post Filter, 15 feet of 3/8 I.D. fuel line, mounting brackets and EFI specific fuel line clamps. All of this is designed to work with your vehicle’s existing sending unit in the gas tank so there is no need to mess with your tank at all.

Here's a basic wiring diagram of it all:



This listing also includes a COMPLETE MSD Ignition System for your early big block 383-400 Chrysler !

Included is an MSD Digital 6A-L Ignition Box (6425), Pro-Billet Distributor (8545), 8.5mm Super Conductor Wire Set (32739), Blaster 2 Ignition Coil (8202), and an MSD Coil bracket (8213). We've put together a complete kit to take the guess work out of choosing the right components for your performance big block Chrysler 383-400 engine. This will not work with 426-440 engines. Please check out our other listing for that kit.

Digital 6AL Ignition Box - Part #6425

MSD started with a clean slate and drew up plans for an all new housing. They kept the same footprint as the traditional 6AL but lowered the profile for a sleek look. The wiring is all routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean. The rev limiter was moved right on top of the housing for easy access to the two rotary dials to set the limit in 100 rpm increments.

Inside the Digital 6AL you’ll find a microprocessor that monitors and controls every firing and rev limit. The circuits are updated with efficient components that help the ignition produce more power while drawing less current! In fact, the new Digital 6AL delivers over 530 volts to the coil with up to 135mJ of spark energy for every firing! Increased output combined with MSD’s proven multiple spark series is a win-win situation!

The new Digital 6AL are supplied with the wiring harness and the components you’ll need for installation. The 6AL is also supplied with vibration mounts. Both ignitions are compatible on 4, 6 or 8-cylinder engines with 12-volt, negative ground electrical systems. They’ll accept trigger inputs from breaker points, amplifiers and magnetic pickups.


Pro-Billet Distributor - Part #8545

This is MSD's most popular performance distributor! The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500” steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSD’s adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application.

8.5mm Super Conductor Wire Set - Part #32739

The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12" length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD uses a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. These wires have a straight end (bendable to 45 degrees) at the spark plug. A coil wire is included as well.


Blaster 2 Performance Ignition Coil - Part #8202

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. All of the Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the Blaster Coil available. All of them have the same internal specifications, but have different housings or components. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application (not included).

Universal Ignition Coil Bracket - Part #8213

The MSD Coil Bracket offers easy, univer­sal mounting for standard size ignition coils up to 2.25” in diameter. The Bracket uses a bolt and nut combination instead of the easily stripped self-tapping screw common on other brand brackets.


Here's a diagram on just how simple it is to wire up this complete MSD Ignition system!

The magnetic pickup connection will be utilized from the ignition box to the distributor.



Payment:

We accept Paypal. You can also call in your payment over the phone for credit card payments [phone removed by eBay] or 319). We collect New York State Sales Tax of 8.63% if you are a New York State resident.

Return Policy:

Weaccept returns for 14 days from the date you received your item. Allreturns are subject to a 20% restocking fee. You can choose to exchangeyour item for one of equal value, a refund less the 20% restocking fee, or youcan apply the value of your returned item (less restocking fee) to any otheritem from our store.

Exchangesand credits for returns cannot be applied to out-of-stock or special orderitems; only those currently available in our store.

ANYRETURNED ITEMS MUST BE AUTHORIZED BY Espeedshop PRIOR TO RETURNINGTHEM!

Ifyou wish to return something, you must contact us for an RMA number andshipping address. You can call us toll free at [phone removed by eBay] or319. There is no charge for this, but in order to organize and process returnspromptly we must tag them so they can be tracked in our system. Failureto obtain authorization will void our return policy and any obligation forrefund or exchange.

Return/Exchange FAQ:

You charge a 20% restocking fee, why so much?

Becausemany of our items ship at no charge and this is one of the costs we must recoupwhen items are returned to us. Additionally we often have to replace themanufacturers packaging and thoroughly inspect the items to they can be sold asnew again and we can certify that they are in perfect condition.

Inthe event we shipped or listed an item incorrectly, it arrived damaged or issomehow defective we will, of course, issue a full refund including anyshipping costs.

I just got my RMA number, how long do I have to getthe item back to you?

Oncethe RMA is issued we must receive the item within 30 days. After 30 days theRMA is voided and the item is no longer eligible for return or refund.

I want to return an item that I have unboxed.I threw out the box/instructions/packaging but want to send it back anyway -can I?

Maybe- sometimes we can get new packaging materials from manufacturer, sometimes wecannot. In the event they are available they are never free. If youhave unboxed your item and destroyed or disposed of the packaging or some otheritem that was included you'll need to contact us to see if the item is eligiblefor return.

My return or refund was refused - why?

Ifwe have received your item and it is not eligible for a return refund orexchange we've likely already contacted you with an explanation and youroptions to have the item returned to you. Most likely the item was not innew condition as it was sold and delivered to you. We cannot and will notaccept damaged, installed or used parts for return. If you disagree withour assessment of your return we encourage you to file a claim with PayPal andlet them mediate the return/credit process. We pride ourselves on the waywe run our business and feel we represent all of our items and policiesaccurately, but we understand two parties may not always view a situation anddraw the same conclusion so PayPal and ebay have policies in place to help usreach a satisfactory conclusion in the event of a disagreement ormisunderstanding.

Shipping information and guidelines:

Weare closed on weekends and most major holidays. We do not ship on thesedays. Your item(s) will leave the next business day. Please noteshipping times quoted by ebay, USPS, or UPS are quoted inbusiness days-these do not count weekends.

Contacting us:

We'rehappy to answer your questions whenever possible. You can message us hereon ebay, or you can always call us toll free at [phone removed by eBay] or 319. We are closed on weekends and Holidays, so we will reply as soon as we can the following business day.

International shipping and customs:

Weship Internationally via UPS, DHL and USPS.

Anytimewe ship an item internationally Ebay and PayPal publish their estimated timeframe for delivery. In many cases we have found these times to beoptimistic for delivery to buyers but fairly accurate for delivery to a givencountry’s customs agency. We have absolutely no control over local non-USpostal delivery times nor the time it takes for an item to clear customs in agiven country. We do our best to ship items as quickly as possible but wecannot assume any responsibility for customs or international shipmentdelays. We post tracking information with EVERY item we ship.Unfortunately in the case of items shipped via the United States PostalService we have found this tracking often lags behind the packages actualprogress or doesn’t work at all once the package has left the United States.We are happy to ship any international item via DHL or UPS as their tracking ismuch better but unfortunately their freight costs are typically significantlyhigher.

Declared values for items shipped internationally:

Weare frequently asked to declare a value lower than what is paid for an item tohelp customers save money on customs duties and associated taxes. Wecannot do so. All of our items ship insured for their full value, as suchthey must also be declared for that value. This protects us both in theevent and item is lost, damaged or does not reach it's destination.

Warranty Policy:

We are happy toassist with any warranty issues. We must state that any and all warrantyexpressed or implied is that of the manufacturer NOT Espeedshop. Thatsaid we will offer whatever help in processing a solution that we can.Some warranty claims can be handled by us, some must be submitted directly tothe manufacturer, in either case we will assist in the process. We willonly support products purchased from us, we apologize in advance but we simplydo not have the time to supply support for products purchased from othervendors. Nowarranty of any kind is offered or implied for parts that are discontinued,new-old stock, or used. Your browser does not support JavaScript.To view this page, enable JavaScript if it is disabled or upgrade your browser.


On Nov-16-12 at 14:19:02 PST, seller added the following information:

FREE! Sellers: Add a FREE map to your listings. FREE!


We are required by New York State law to collect 8.63% New York State sales tax if your billing address is in the state of New York.


Parts Search:


Follow