Parts Search: If you like this part use the Google +1 button:

---

Price: $30

This item has been shown 754 times.

Click HERE for more information about this part.

BEST OFFER FOR 2 OR MORE ONLY PLEASE

2 PACK FIBERGLASSMOTORCYCLE PIPE WRAP KITS (2)25 FOOT ROLLS & 8STAINLESS STEEL TIES (12") WRAP SPECS:

• MATERIAL: 100% PURE GLASS FIBER
• THICKNESS: 1/16 INCH
• WIDTH:1 INCH
• HEAT TREATED
• TEMP: 1100°F CONTINUOUS, 2100°F INTERMITTENT
• COLOR: BLACK
• PREMIUMCROSS LOCK WEAVE

USED FOR:

MOTORCYCLES

STREET RODS

HOT RODS

MUSCLE CARS

VINTAGE CARS

ATVS

GO CARTS

TRACTOR AND LAWNMOWERS

AVIATION & MARINE

COMMERCIAL TRUCKS

FLEET VEHICLES

FARM EQUIPMENT

MOM'S MINI VAN

ANYTHING WITH AN EXHAUST!

BEST SELLING S.S. CABLE TIES ONLINE.. PERIOD

SPECS.

• 12"LONG X 3/16" WIDE / 300mm x 4.6mm
• HIGH POLISHED MIRROR SHINE
• 100% FIRST QUALITY 310 STAINLESS STEEL, EXCELLENT FOR HOLDING FIBERGLASS EXHAUST WRAP IN PLACE.
• 1000s OF OTHER DAILY USES AND REPAIRS.
• THEY WILL NOT RUST OR CORRODE
• HIGH DURABILITY NON FLAMMABLE NON CORROSIVE
• FULLY ROUNDED TIPS
• SMOOTH EDGES SELF-LOCKING (W/ BALL-BEARING LOCK!)
• NO SPECIAL TOOLS NEEDED FOR INSTALLATION
• THE HARDER YOU PULL THE TIGHTER THEY GET (PLEASE DONT PULL BARE-HANDED, USE PLIERS)
• 122 POUND LOAD CAPACITY! BEATS ANYTHING OUT THERE

NOT JUST FOR HIGH PERFORMANCE VEHICLES!

REASONS TO CONSIDER THIS UPGRADE:

• EXTENDS ENGINE LIFE
• INSTANT FUEL SAVINGS, HIGHER MPG
• PROVEN TO REDUCE UNDER HOOD HEAT BY UP TO 70%
• EASILY INSTALLED BY THE NOVICE AND PRO ALIKE
• WILL REDUCE TURBO LAG
• WILL INCREASE HORSEPOWER
• PROTECTS UNDER HOOD WIRING & ELECTRONICS
• KEEPS THE ENGINE COMPARTMENT COOLER, PROTECTING PLASTIC PARTS, HOSES, WIRING ETC FROM DRY ROT AND EARLY BREAK DOWN.

ALSO A GREAT WAY TO HIDE BLUING, WELD LINES OR JUST PLAINUGLY PIPES ON OLDER OR CUSTOM MADE PIPES

SO HOWMUCH FIBERGLASS WRAP DOI NEED FOR MY PROJECT? / LOOK BELOW, OR SEND ME A PICTURE.

YIELD CHART:

CHART = WRAP NEEDED PER 1 LINEAR FOOT OF PIPE YOU PLAN TO WRAP.

ALWAYS ADD 10% TO TOTAL JOB AND ANOTHER 8-14" PER BEND APROX. DEPENDING ON THE ANGLE

PIPE

DIAMETER

INCH/mm

1” WIDE WRAP

PER LINEAR FOOT

2” WIDE WRAP

PER LINEAR FOOT

1-3/8”/35mm

70”/5’

30”/2.5’

1/1/2”/38mm

76”/6.33’

33”/2.75’

1-5/8”/41mm

82”/6.8’

35”/2.9’

1-3/4”/45mm

88”/7.33’

38”/3.16’

1-7/8”/48mm

95”/7.9’

41”/3.5’

2”/50mm

101”/8.4’

44”/3.66'

2-1/8”/53mm

108”/9’

46”/3.83’

2-1/4”/57mm

113”/9.4’

49”/4’

2-1/2”/64

125”/10.5’

52”/4.33’

3”/76mm

136”/11.33’

60”/5’

EXAMPLE: IF YOU HAVE 2" PIPES THAT ARE 10' LONG AND YOU WANT TO USE A 2" WIDE WRAP.....

LOOK AT THE CHART, FIND YOUR PIPE SIZE ON THE LEFT (IN THIS CASE 2" OR 50MM {SAME THING} ) THENFOLLOW THE CHART TO THE RIGHT UNDER "2" WIDE WRAP" YOU WILL SEE YOU NEED 44 INCHES OR 3.83 FEET PER LINEAR FOOT OF PIPE

TAKE 44" or 3.66' AND MULTIPLY BY 10FT = 440 INCHES/36.6 FEET THEN ADD 10% ..... SO YOU NEED A 50 FT ROLL. DONT FORGET TO ADD FOR BENDS

INSTALLATION:

1. WEAR GLOVES AND A LONG SLEEVE SHIRT TO PREVENT ITCHING/AND IRRITATION.
2. WRAP WILL SMOKE LIGHTLY AFTER INITIAL INSTALLATION (JUST FEW MINUTES).
3. STARTING AT THE FLANGE END LEAVE ABOUT ¼"- ½" FOR HARDWARE.
4. EACH WRAP SHOULD OVERLAP THE PREVIOUS LAYER BY APPROXIMATELY ¼"- ½"
5. TURNS AND CURVESWILL HAVEBIT MORE OF AN OVERLAP.
6. TRY TO KEEP THE WRAP AS SNUG AS POSSIBLE AS YOU GO AND CONTINUE TO THE END OF THE PIPE.
7. USE A STAINLESS STEEL TIE AT BOTH ENDS TO HOLD WRAP IN PLACE. ( I USE 2 0R 3 AT EACH END FOR LOOKS, EXTRA SECURITY & PEACE OF MIND)
8. YOUR DONE.

IF YOU NEED MORE STAINLESS STEEL TIES. PLEASE LOOK IN OUR STORE (SEE BELOW)

DONT FORGET TO CHECK OUR OTHER FIBERGLASS,LAVA AND CERAMIC WRAP COMBINATIONS, KITS AND ROLLS. WE ALSO HAVE STAINLESS TIES IN 3/16" (STANDARD) AND 5/16 (MONSTER) IN LENGTHS FROM 4"- 54"! AND PACKS FROM 5-100

CUSTOM PRODUCED USING OURQUALITY GUIDELINES EXCEEDING STANDARDS OF OTHER RETAILERS

BEST PRICES ON EARTH!

WE WILL SHIP THIS FAST & FREE~!

> CLICK HERE TO VISIT OUR STORE <

WE STRIVE TO REACH THE FOLLOWING GOALS, QUALITY PRODUCTS, FAST SHIPPING, INTEGRITY, AND SERVICE AFTER THE SALE. ↓QUESTIONS?↓ PLEASE TAKE A QUICK MOMENT TO READ OUR POLICY'S BEST OFFERS: WE TRY OUR BEST TO WORK WITH EVERYONE. WE RECEIVE 20-100 OFFERS EACH DAY. PLEASE BE PATIENT WITH US. WE REVIEW ALL OF THEM... RIDICULOUS OFFERS WILL NOT BE RESPONDED TO. response: PLEASE CONTACT US WITH ANY ISSUES PRIOR TO LEAVING response OTHER THAN A POSITIVE WITH ALL 5 STARS. WE TRY VERY HARD TO MAINTAIN A HIGH SELLER RATING AND WANT YOU TO BE HAPPY WITH YOUR PURCHASE EVERY TIME! INTERNATIONAL & APO CUSTOMERS: SHIPPING IS FREE FOR USA ADDRESSES ONLY. YOUR SHIPPING COST INCLUDES POST AND, OUR TIME FOR DOCUMENTATION, RESTRICTED GOODS CHECKS AND OTHER PROCEDURES UNIQUE TO EACH COUNTRY. AVERAGE PURCHASE TO DELIVERY TIMES (W/ STANDARD DOMESTIC SHIPPING): MIDWEST/1-3 BUSINESS DAYS EAST/ 2-4 BUSINESS DAYS SOUTH/ 2-4 BUSINESS DAYS WEST/ 3-6 BUSINESS DAYS HI, AK, PR, GU, VI/ 4-7 BUSINESS DAYS TIMES ARE NOT GUARANTEED OVERNIGHT/EXPRESS SHIPPING: IF YOU CHOOSE OVERNIGHT SHIPPING. PLEASE NOTIFY US AS SOON AS YOU PAY. CUT OFF IS 3-4PM CENTRAL STANDARD TIME. ORDERS PLACED AFTER THE CUT-OFF SHIP THE NEXT BUSINESS DAY. SOME ZIP CODES ARE NOT ELIGIBLE FOR OVERNIGHT SHIPPING AND MAY TAKE 2 DAYS. ABOUT US: SELLERS FOR OVER TEN YEARS. WE WANT TO GIVE YOU THE MOST VALUE FOR YOUR DOLLAR. OUR ITEMS ARE MANUFACTURED UNDER STRICT QUALITY CONTROLLED GUIDELINES. WE ARE LOCATED IN THE CENTRAL UNITED STATES! WE CAN AND WILL:

~ANSWER YOUR QUESTIONS

~UNDERSTAND YOU AND YOUR CONCERNS

~HAVE KNOWLEDGE ABOUT THE PRODUCT YOU MAY BUY FROM US

~SHIP YOUR PRODUCT FAST (EVERYDAY MONDAY-FRIDAY)

~SHIP FROM THE CENTRAL UNITED STATES, (ILLINOIS) GIVING FAST SHIPPING TRANSIT TIMES NATIONWIDE

~SHIP YOUR ITEM WORLDWIDE, WE ARE SPECIALISTS IN INTERNATIONAL SHIPPING AND CUSTOMS

FINALLY, IF YOU ARE UNHAPPY WITH YOUR PRODUCT WE OFFER AN EXTENDED RETURN, EXCHANGE, REFUND POLICY ON MOST ITEMS (WRAP KITS MUST BE UNOPENED & UNUSED)

PLEASE FEEL FREE TO CONTACT US WITH ANY QUESTIONS. !!THANKS FOR STOPPING IN, COME BY AGAIN!!