MOPAR SUPER BEE DODGE RAM DECAL CAR TRUCK CUSTOM VINYL STICKER 12COLORS for Sale

Price: $2

This item has been shown 334 times.

DO NOT CLEAN WINDOWS WITH WINDEX OR OTHER CHEMICAL. PLEASE READ INSTRUCTIONS BELOW
IF YOU LEAVE DECAL IN THE HOT CAR IT WILL CAUSE THE DECAL TO WARP, WRINKLE AND POSSIBLE DAMAGE!!!!!!!
FOR CAR WINDOWS ORDER WHITE!!!!!!!!!
DECALS HAVE NO BACKGROUND!!!!!!!!!!!!!!!
ORDER USUALLY SHIP WITHIN 24HRS!!!!!!!!!!!!!Decal is made of durable high quality vinyl that is perfect for indoor or outdoor use.
It is easy to apply and will stick to almost any smooth surface, such as windows, glass doors, walls, etc., It is removable, but not reusable.
Easy to apply, just remove backing and apply to your surface, then peel off the transfer tape. It leaves no residue when removed. It will last for years!
Can be applied to:Automobile windows/paint, trailers, walls, tool boxes, laptops, game consoles, motorcycles, helmets, skateboards, snowboards, surfboards, instruments, etc.
Application Tips:The surface temperature should range from 60 degrees F - 90 degrees F. Surface prep is key for long vinyl life. Make sure the surface is clean of oil and debris. Decals should NOT be applied in the rain or snow.How To Apply A Small Sticker or DecalStep 1

Clean the area thoroughly with rubbing alcohol or water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.

Step 2

Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.

Step 3

Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.

Step 4

Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step.

Step 5

Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.


*Use a pin to poke any air bubbles in the center and push the air out through the hole.
*For best results do not apply a sticker in extreme hot or cold temperatures.

On May-25-17 at 15:40:16 PDT, seller added the following information:



Parts Search:


Follow