When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $29.00
LIGHTNING FORCE PERFORMANCE
MAKE US AN OFFER
LFP 99-04 Ford SVT F-150 Lightning Clunk Washers
DEALER INQUIRES WELCOMEDOur LFP precision-CNC-machined billet spacers fit between the driver\'s side front lower control arm and the frame bracket. The factory holes for the rear bolt are slotted, and the installationof these washers will prevent unwanted movement of the control arm mounting bolt. The movement that results from the factory arrangement can be felt as a \'clunk\' when the steering wheel is turned and as instability in the steering while driving.
Our LFP 1.5\" diameter spacers are precision-machined from high-grade STAINLESS STEEL unlike our competitors. Two washers (one for each side of the bolt) are included in each kit. Installation is very simple and no special tools are required.
The two washers install at each end of rearmost bolt for the driver\'s side lower control arm.
(Photo by Speedin Bob, F150online.com)
Note 1: It is recommended that the truck be aligned following the installation of these clunk washers.
Note 2: In some instances, it appears that Ford used a control arm bolt with the same thread but a slightly larger OD. The fit of the washerover the fastener is tight by design, but some trucks using this particular bolt with the taller threads may require a slight honing of the ID of the washers for proper installation.
Item will ship US mail, FEDEX, or UPS