LC Engineering STREET HEADER KIT FOR 1985-95 TOYOTA Pickup 4Runner 22R 22RE for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $450.00

Street Header Kit 4wd Direct-Fit 22R/RE 1985-1995 Pickup Or 4Runner 22R 22RE 50 State Legal C.A.R.B. EO: D-462-1


Some people don\'t know it but a header makes the most power gain with a single bolt on part with no need of complicated and super expensive modifications to your vehicle. It increases an average of 10-15HP on your engine by increasing improved flow in the exhaust system (Logic says: the faster everything comes out, the faster everything can come in).There are many headers in the market these days, probably cheaper, but they are far from better. LC Engineering has been producing, testing, installing and designing these headers for more than 20 years. so we can assure you that there is not a better header for a Toyota 22 engine series out there on the market. So after installing your LC Engineering Street header on your Toyota you will know why we still the #1 header around, why race and off-road enthusiasts prefer us and why we are worth the extra expense.Our most popular product are the street header kits. LCE uses all 304 1 1/2\" Stainless steel tubing, 16 gauge .065 wall, the collector is made in house with 409 Stainless steel. A huge 1/2\" thick steel header to head flange and 3/8\" steel flanges at the collector that accepts the stock Toyota round exhaust gasket. As if that were not enough, the whole package is coated in a high temp ceramic coating. To make the install easy on you LCE supplies you with all the gaskets needed to bolt your header on your vehicle. Our header flanges are cut to allow the use of OEM exhaust manifold gaskets. These gaskets feature a metal crush fire ring and a heat deflector for the plug wires. No cheap paper gaskets to blow out with a LC Engineering Header. This header kit is a direct fit for 85-95 4-Wheel drive trucks, and includes an adjustable connector pipe to connect to the factory catalytic converter in most applications. Complete Kit Includes:

  • 4WD (81-95) Street Header
  • 4WD Connector Pipe (1041006)
  • Street Header Gasket Set (1040015)

Additional Options For Header can be found on our website LCEPerformance.com

  • O2 Block Plate Kit $5.00 (1045003)
  • Header Air Injection Block Off Plates $15.00 (1045014)
  • Header Stud Set $15.00 (1045030)
  • Heated O2 Sensor for pre 1988 models $69.95 (1065034)


If your O2 sensor is located in the exhaust manifold (1984-1988) applications, then all youwill need to extend the wire to match to the new location is a piece of 18 gauge wire and 2 small crimp connectors from your local auto part store.

All Toyota Pickups and 4Runners manufactured before 1988 have a factory non-heated single wire oxygen sensor. When installing our Street Header Kit you will notice that the oxygen sensor provision has been moved downstream from its factory location. We recommend that anyone with a pre 1988 application utilize our universal 4 wire heated O2 sensor in replace of there factory single wire. This will not only improve the signal but the gas mileage as well as the performance of the vehicle. Vehicles made from 1988-1995 should have a factory heated O2 sensor and should not need to change it unless their factory one is damaged. Universal Heated O2: 1065034 Available on our website at LCEPerformance.com

    Installation Note:
    Over 20+ years of producing these headers LC Engineering has made all attempts to make these header kits fit as best as possible. Unfortunately there are a very small amount of applications that may require more extensive modification or even fabrication to make the connector pipe fit correctly. This is mostly contributed to numerous changes in Toyota\'s production along with aftermarket modifications. LC Engineering offers full technical support to make your fitment as easy as possible but they will not be responsible for any \"custom\" connector pipes. Contact our Tech Support Line for further information at 928-855-6341.


    Powered by eBay Turbo Lister
    The free listing tool. List your items fast and easy and manage your active items.


    Parts Search:


    Follow