When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $775.00
06-14 Lexus IS-F Type-WD (Wald Style) Front Half Aero Bumper
Offered in our signature flexible HybridFRP™ material (Original Wald version came in standard non-flexible FRP). Also offered with optional carbon or carbon-kevlar accents (front splitter & vent sections). Choose between Plain or Twill Weave Carbon.
FullHYBRID FRP® - $600
HYBRID FRP® w/carbon accents - $775
*Comes installed with high-quality black powdercoated mesh grille (side vents)
*Comes installed with prongs (mesh holders) for easy installation of center OEM mesh grille (removed from OEM front bumper)
*Carbon accented version is built using Toray Carbon, which is the same high-grade carbon also used by Ferrari
*Superb fitment over authentic version and other replicas which tend to have gap issues along the upper middle section
*HybridFRP™ material offers superb durability over standard fiberglass products
*Accurate design
*Quality construction & OEM-like trimmed edges
*Please tell us if you prefer Plain Weave or 2x2 Twill Weave Carbon
Shipping
- Shipping to the lower 48 States is $165 to a business; $185 to residential
- CA buyers, please add 7.75% sales tax.
- For quotes to Alaska, Hawaii, Puerto Rico, and Canada please email us.
International Shipping
WE SHIP INTERNATIONAL!
- Please provide us with the FULL shipping address or the nearest airport/seaport
- We quote for Door-to-Door as well as Door-to-Port (you pick-up at the port) services
- We only quote and collect funds for transportation. You will need to be responsible for your country's local fees such as duties, customs, taxes, VAT, brokerage, and other possible misc. fees
- International freight is usually costly thus we encourage multiple buyers in your area to combine shipping whenever possible
- Package dimensional size determines freight cost. The bigger the size, the higher the cost
- Air Freight will be the fastest & most expensive service (1-2 weeks)
- Sea Freight will be the slowest & least expensive (4 weeks)
Shine Auto Project International
10275 Philadelphia Ct.
Rancho Cucamonga, California 91730
[phone removed by eBay]
About Us
Shine Auto Project is a composites manufacturer of automotive aerodynamic & dress-up components for popular sport cars and sport sedans. Our product specialty is light-weight & durable exterior components such as bumpers, side skirts, front chin spoilers/lips/splitters, front & rear diffusers/under trays, vented hoods, rear spoilers, and GT wings. Our products are made in-house at our Southern California facility, providing us with access to quality raw materials, skilled labor, and ability to maintain strict quality control and provide timely delivery.
Follow us on Instagram @shineautoprojectusa
Like us on Facebook /shineautoproject
Our unique Flexible HYBRID FRP® material
Shine Auto Project was established in 2005 to meet the growing need of enthusiasts for quality aero & dress-up components locally at competitive prices. Our focus is (but not limited to) reproduction/replica pieces of OEM components, high-demand & hard-to-get exclusive aero, and rare discontinued items. Our brand has made a bold impression in the Japanese sport compact car after-market industry shortly after the introduction of our trademark HYBRID FRP® line. While it is conventionally known for fiberglass (FRP) automotive products such as bumpers, front lip spoilers, and side skirts to be stiff and brittle, and thus ill-suited for daily road use, our HYBRID FRP® line challenges the existing marketplace by being one of the first and few automotive FRP products to have durable and flexible properties. Our Hybrid FRP® material is a proprietary formulation with over a decade of proven performance to satisfied enthusiasts worldwide. Our competitors have made bold claims of being able to offer a similar product, but have yet to match our standard. Other features such as light-weight construction, attention to detail, and excellent product fitment make our product the preferred choice.
SHINE AUTO CARBON FIBER & Carbon-Kevlar: Ours vs Others'?
Key Features:
*Toray T300 (Japan) 3K Plain & 3K 2x2 Twill Weave Carbon (Used By Ferrari)
*Marine-grade UV Protected Clear Gel Coat
*UV Protected Resin Custom-Formulated for Carbon Fiber. (Has a light-blue tint vs. a yellowish-brownish tint often found in inferior resins to protect against fading and yellowing over time)
We use Toray Carbon (Japan), which is used by Ferrari and Mercedes. We chose Toray because the carbon weaves are compact and comes with a smooth sheen. Good enough for Ferrari ...good enough for us. Inferior carbon brands/grades tend to have a wavy ocean-like effect, looser weaves, and off-beat lines that clearly show under sunlight. Our carefully selected UV protected clear gel coat and light-blue tinted resin protects against yellowing & pre-mature oxidation over time.
There are a myriad of raw material grade-levels and brands that go into composite products. Therefore, it would be unwise to view all carbon products to be the same. Just as there are different quality primers, paints, and clear coats that go into determining a cheap or good paint job, the same criteria applies to composite parts. Will the part look beautiful on your car and will it stand the test of time?
If you are looking for a quality part and willing to pay the price for materials & labor that goes into building such a part, it would be in your best interest as a consumer to purchase from a reputable brand. A reputable brand vs. a fly-by-night brand will have established some level of integrity and consistency. This is important as the typical consumer has no idea what type of raw materials go into these parts. Integrity has not been established with these fly-by-night brands, therefore you never know what you are truely getting until it is too late. Even an inexpensive paint job can look great the first week...
Return Policy
We offer a 60 day return policy. There is no restocking fee. If one wishes to return a product because he has changed his preferences he will be responsible for the shipping costs (to and from) of the item and a refund will be granted on the price of purchase of the item (no refund on shipping.) If you are unsatisfied with a product because there is a valid defect (must be proven) we will send out a replacement (if we feel we can replace it with a non-defective item). The main defect we are referring to is a fitment issue. Slight aesthetic /cosmetic inconsistencies will not constitute as a defective item. Our parts are handmade and there will be some level of inconsistency in the presentation of the product, which is not unusual for composite parts. Most items will require professional preparation before painting and slight surface inconsistency issues will be resolved during the process. Carbon items, which do not require any paint work or prepping for the most part (applying an automotive urethane clear coat is highly recommended) will show some level of finish inconsistencies such as air bubbles and very light levels of scratches and swirl marks, which will take up close scrutinizing to see with the naked eye. We are known for producing quality parts and stand behind our products.
Orders, for the most part, can be cancelled at any time before shipping of the goods. However, custom items such as parts made in carbon-kevlar or special request constructions cannot be cancelled.
We are open and fair with our customers and long as our customers are open and fair with us.
Disclaimer
All products of Shine Auto Project are for Off Road Use only. Shine Auto Project is not liable for any damages through improper use. Products should be installed, fitted, and painted by a professional body shop. Aftermarket aero parts do often require the removal of bumper support beams and protection foam for fitment. Our parts are often made from multi-piece molds so split lines or seam lines are common and inevitable. They are not flaws. They are inherent in the production process and must be sanded down during the prep process. Keep in mind these parts are hand-crafted and it is nearly impossible to consistently have a 100% perfect laminate. Air bubbles and pinholes are minor imperfections common with composite parts. Bondo and putty are often used to fill in these imperfections, while a coat of primer gives an added even fill throughout the surface. We do our best to spot these imperfections before they leave the facility. These minor imperfections can be easily taken cared of through the proper prep and paint process as well.
Please Click on Images for a Larger View
(HybridFRP™ w/ Plain Weave Carbon Accents)
Detailed pictures of the ACTUALaero parts WE PRODUCE
(Comes with high quality black-powdercoated aluminum mesh)
(Mesh-mounting prongs pre-installed for a clean look)
(Accurately trimmed edges)
(Test Fit Demonstration)
(No Gap issues along upper front common in Authentic and other replica brands)