Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

GT45 13PC TURBO KIT TURBOCHARGER+MANIFOLD+DOWNPIPE+WG 79-93 FORD MUSTANG 5.0L V8 for Sale


Parts Search:
If you like this part use the Google +1 button:


GT45 13PC TURBO KIT TURBOCHARGER+MANIFOLD+DOWNPIPE+WG 79-93 FORD MUSTANG 5.0L V8

Price: $879

This item has been shown 14848 times.

Click HERE for more information about this part.


search also descriptions
GT45 13PC TURBO KIT TURBOCHARGER+MANIFOLD+DOWNPIPE+WG 79-93 FORD MUSTANG 5.0L V8 ITEM SKU: TM-FM7950L WG-46-SL OFL VCF-GT45 ITCL-2004 FMICPP-U-25-ST BOV-SQV-B-SL FP-H250 BC-BK ODL AF-H-3-BL

    High Compression/ Boosting GT45 Oversize Turbocharger

    The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.


    Specifics and Benefits:

  • Capable of Boosting Horse Power up to 600+ BHP
  • High Quality Material, Cast Housing with Durable Steel Exhaust (Turbo Manifold) Flange: Standard T4 4-Bolt Exhaust (Downpipe) Flange: Standard 3.25" Inner Diameter V-Band Intake Inlet/ Outlet: 3.75"/ 2.25"
    Compressor: Trim: 69 A/R: .66 Inducer: 68.70 Exducer: 97.80
    Turbine: Trim: 92 A/R: 1.05 Inducer: 87.4 Exducer: 77.00
    High Performance Tubular Exhaust Turbo Manifold

    The heart of any Turbo system is the Manifold and the Turbocharger. These form the basis where the rest of the turbo system is built around. Turbo manifolds have only one, but the most critical purpose in turbo systems, and that purpose is to expel exhaust gas into the turbine of a turbocharger as efficiently as possible. There is no match for power and performance for tubular stainless steel manifolds. Tubular manifolds are made up of runners coming from each cylinder, meeting up at a collector. Tubular manifolds yield a higher efficiency rate, as each runner is generally the same circumference. This allows for a much smoother flow of exhaust gas to the turbo. Tubular stainless steel manifolds are chosen over cast manifolds for big power applications. Tubular stainless manifolds feature better and more consistent flow of exhaust gases. Most of the tubular Stainless manifolds also feature the placement of the wastegate flange towards the middle of the collector to allow accurate readings and precise control.


    Specifics and Benefits:

  • High Performance Tubular Turbo Racing Design
  • Made of High Quality T-304 Polished Stainless Steel Alloy Material for Strength and Durability
  • Tubular Design to Ensure Equivalent Exhaust Flow Rate from each Cylinder
  • Computerized Mandrel-Bended to Maximize Air Flow Smoothness
  • TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing
  • Increase Engine Exhaust Output and Efficiency
  • 44mm External Wastegate Port and Flange Included
  • Standard T4 Configuration Outlet


  • Lightweight Stainless Steel Cross Pipe


    Specifics and Benefits:

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends
  • i.e. Maximizing Smoothest Exhaust Airflow
  • High Performance Racing Spec. Design
  • TIG Welded CNC Machine Flange for Strength and Durability
  • Inlet Sizes: 3.75" (Pipe 1)/ 3.25" (Pipe 2)
  • Outlet Sizes: 2.50" (Pipe 1)/ 3.00" (Pipe 2)
  • Piping Diameter: 2.50" (Both)
  • O2 Sensor Bung and Flexpipe Insertions on Cross pipe 1
  • 44mm Wastegate Bung on Cross pipe 2
  • Increases Engine Output and Efficiency
  • Instantly Gains 10 - 15 HPs
  • Direct Bolt-On Installation, Requires NO Modification

  • Universal Lightweight Aluminum Bar and Plate Front-Mount Intercooler

    When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine. Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present.


    Specifics and Benefits:

  • High Performance Bar and Plate Turbo Racing Design
  • Made of High Quality T-6061 Aluminum Durable Material
  • Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level
  • Intercooler Size: (24.50" Including Piping) 22.25" (L) X 10.75" (H) X 2.50"(W)
  • Core Size: 17.75" (L) X 10.50" (H) X 2.50"(W)
  • Inlet/ Outlet : 2.00"/ 2.00”
  • Inlet/ Outlet Inner Diameter: 1.75"/ 1.75”

  • Universal Aluminum Intercooler Piping

    Specifics and Benefits:

  • Made of High Quality T-6061 Lightweight Aluminum Piping
  • Powder-Coated Surface Finish
  • 2.50" Piping Diameter
  • Increase 65% Air Flow comparing with other Standard Piping

  • Adjustable Billet Aluminum Blow Off Valve BOV

    The Blow-Off valve (BOV) is a pressure relief device on the intake tract to prevent the turbo’s compressor from going into surge. When the throttle is closed rapidly, the airflow is quickly reduced, causing flow instability and pressure fluctuations. Surge can eventually lead to thrust bearing failure due to the high loads associated with it. Blow-Off valves use a combination of manifold pressure signal and spring force to detect when the throttle is closed. When the throttle is closed rapidly, the BOV vents boost in the intake tract to atmosphere to relieve the pressure, helping to eliminate surge.

    Specifics and Benefits:

  • Billet Aluminum Body with Anodized Finish
  • Draw In Surrounding Air and Release a Unique Discharge Sound
  • High-Quality Diaphragm and Short Stroke Significantly Increase Response
  • Dual Spring System Promoted Response and Allows for High Boost Pressures
  • Holds Up to 30 PSI Boost Pressure
  • 2 Bolt Mounting Design
    Aluminum 2.5” Flange Pipe

    Specifics and Benefits:

  • Fits SSQV Dump Pipe Flange
  • Construction Prevents Warping due To High Heat
  • Made of High Quality T-6061 Aluminum, Lightweight Design
  • 2.50" Pipe Size

  • Universal 46mm Wastegate with Spring

    Wastegates provide a means to control the boost pressure of the turbo charged engine. Wastegates work to bypass exhaust flow from the turbine wheel. Bypassing the exhaust flow reduces the power driving the turbine wheel to match the power required for a given boost level. Similar to the BOV, the Wastegates uses boost pressure and spring force to regulate the flow bypassing the turbine. Wastegates are bolted to exhaust manifold or header. The advantage of external Wastegates is that the bypassed flow can be reintroduced into the exhaust stream further downstream of the turbine. This tends to improve the turbine’s performance.


    Specifics and Benefits:

  • High Strength Cast Steel Body with Steel Head
  • Comes with 12-PSI Spring Installed
    30 PSI Turbo Boost Controller

    Specifics and Benefits:

  • CNC Machined Aluminum Body
  • 1-30 PSI Adjustable
    Stainless Steel Braided Oil Feed Line

    Oil feed lines and returns lines are an essential part of any turbo system. Oil feed lines bring oil to the turbocharger, at the same time the oil cools and lubricates the moving parts. The Oil Drain Lines take the oil that has passed through the turbo and guides it back into the engine’s oil pan. Without these two components, the turbocharger’s internals would overheat or seize causing major complications.


    Specifics and Benefits:

  • Made of High Quality Stainless Steel Hose
  • 10AN Fittings Anodized Ends
  • Inner Diameter: 0.25"
  • Length: 36.00"
  • 1/8 NPT Fittings Natural Polish Finish
  • CNC Machined Turbo Adapter Plate
  • Brass Fitting, Block Fitting, and Port Cover Included
    Universal Braided Stainless Steel 10AN Oil Drain Line

    Specifics and Benefits:

  • Stainless Steel Braided Hose 1/2" Inner Diameter 20.00" Length
  • 10AN Fittings Anodized Finish
  • Weldable 10AN Oil Pan Fitting Included

  • 3.00” Universal Mushroom Type Air Filter

    Specifics and Benefits:

  • Made of Reinforced Material and Covered with Chromed Finish for Lightweight and Durability
  • 3.00” Filter Inlet, 3.00" Inner Diameter Pipe
  • Performance: Improves Up to 95% Filtration Efficiency
  • Micro High Density Foam Gauze Type Filter Material, Washable with Water or Soap, and Reusable
    Stainless Steel GT45 V-Band Clamp

    V-Band Clamps makes it easy to install and remove exhaust systems and turbo parts, such as downpipes, B Pipes and the like. Great for racers and tuners, these clamps make it easy to remove parts to gain access to vital componenets easily as there are no hard hard to reach bolts or special tools needed. Simply undo the clamp and you can remove the component easily

    Specifics and Benefits:

  • Made of High Quality T-304 Mild Steel Durable Material
  • CNC Machined Stainless Steel Flange
  • Inlet Flange Inner Diameter: 3.25"
  • Overall Clamp Width: 4.25"
  • Direct Bolt-On, High Performance Use
  • Universally Fits GT45 Turbochargers

    100% Brand New
    Professional Installation is Highly Recommended (No Instruction Included)


    Package Includes:

  • 1 X GT45 Turbocharger
  • 1 X Stainless Steel Turbo Manifold
  • 1 X Set of Exhaust Manifold Cross Pipe
  • 1 X External Cast Steel Wastegate WG
  • 1 X Type-SSQV Blow Off Valve Kit
  • 1 X Flange Pipe
  • 1 X Mushroom Type Air Filter
  • 1 X Oil Drain Line Kit
  • 1 X Braided Oil Feed Line
  • 1 X Adjustable Boost Controller
  • 1 X GT45 V-Band Downpipe Clamp
  • 1 X Lightweight Aluminum Intercooler
  • 1 X Set of Aluminum Piping

    4-Piece Piping Set Includes:

  • 2 X 180 Degree U-Pipe
  • 2 X 90 Degree Pipe
  • 2 X 45 Degree Pipe
  • 2 X Straight Pipe
  • Hardware, such as Gasket(s) and Bolt(s), if Any is Shown in the Picture Above


    Application:

  • 79-93 Ford Mustang
    (Models Above with a V8 5.0L Engine ONLY)
  • Please Check Compatibilities for Years and Models
    Modification might be Required for Some Vehicles Some Minor Extra Tools and Accessaries, such as V-Band Clamps (NOT INCLUDED) might be Required for Installation
* Professional Installation Highly Recommended! No instructions included! * DOMESTIC LOWER 48 US STATES: $0.00 AK / HI / PR / PO BOX: $199.98 CANADA: $199.98 REST OF THE WORLD: $498.98 SALES TAX: CA ONLY Shipping Information:
  • VERY IMPORTANT: Double check shipping address. We are not responsible for incorrect or undeliverable addresses.

  • Please use Shipping & Payments tab on top of page for shipping details for your location.

  • Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.

  • For Canada shipping please select the lowest price. We do not offer expedited shipping.

  • US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.

  • Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.

  • Customer assumes shipping charges incurred in shipping to undeliverable address.

  • International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.

  • We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.

  • We are not responsible for any changes to address after item has been shipped.
Return policy:
  • 14 Days money back, please notify us within 14 days after you've received your purchased item.

  • All return requests must be submitted through your account.

  • You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package.

  • Buyers pay for return shipping fee.

  • Items to be returned must be in re-sellable condition.

  • All returns are for refund ONLY. No exchange accepted.

  • Returns for refund are subject to a 20% restocking fee.

Terms & Conditions:
  • For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing.

  • All items do not come with installation instruction unless otherwise specified.

  • If item is questionable, please consult your local professional/mechanic before making purchase.

Contact:
  • Please use the "Ask A Question" form above to contact us. Please note that we only work from 9am-6pm PST M-F but are OFF on the weekends so messages sent after business hours especially on Friday, will be answered the following Monday.
© 2011 SPEED DADDY


Follow DragTimes on Twitter
Share |


Similar 1/4 mile timeslips to browse:

1969 Ford Mustang : 6.860 @ 204.000
Bill Sexton, Engine: 712ci Pontiac built by Sonny Leonard,


1969 Ford Mustang : 7.170 @ 177.000
CARL EPPLE, Engine: 572CI SVO 460, Tires: 33X10.5W MICKY THOMP


1969 Ford Mustang Mach 1: 7.670 @ 178.210
Phil Manquen - Walt Drakeford, Engine: 602 CI, Tires: 10.5


1987 Ford Mustang Turbo: 7.816 @ 180.800
Brad, Engine: 347CI, Turbos: Precision 98.5mm Tires: 28 x 10.5 MTs


1995 Ford Mustang Cobra: 7.889 @ 197.360
Jim Mills, Engine: 427 Windsor, Turbos: Twin GT47-88 Tires: M/T 325/50/15 Radials


2007 Ford Mustang Super GT500 Twin Turbo: 7.890 @ 175.220
EV, Engine: Built 5.4L Aluminum Engine, Turbos: Twin 67mm Precision Turbos


1989 Ford Mustang LX Hatchback 10.5 tire: 8.000 @ 170.000
Marshall Hancock, Engine: 572 ci, Supercharger: n/a Turbos: n/a Tires: M/T


1986 Ford Mustang THE STAMPEEDE BANDIT: 8.013 @ 170.033
Larry Gotreaux, Engine: BBF-ELIMINATOR-460-605ci, by Tims Engines, Denham Springs,, Supercharger: N/A Turbos: N/A Tires: 27x15 GY & 33.5x17x15W-GY-D1


1989 Ford Mustang lx: 8.150 @ 167.000
jorge fretts, Engine: 598, Tires: 33x10.5w


1993 Ford Mustang LX: 8.390 @ 167.870
Lee Howie, Engine: Bennett, Turbos: 1 Precision PT90 Tires: DOT


1987 Ford Mustang coupe: 8.400 @ 162.370
Todd, Engine: 385ci,


1989 Ford Mustang coupe: 8.420 @ 167.000
Ryan Ellington, Engine: sbc 434, Tires: mt 275/60/15 drag radial


1991 Ford Mustang GT: 8.520 @ 172.700
PRO LARRY, Engine: 351W, Supercharger: NA Turbos: NA Tires: NA


1990 Ford Mustang GT: 8.527 @ 172.300
PRO LARRY AND BRANDON G.T, Engine: 351W, Tires: 10.5 SLICK'S


1993 Ford Mustang Cobra 363 Nitrous: 8.541 @ 152.870
CJ Williams, Engine: 363,


2006 Ford Mustang GT: 8.579 @ 158.780
Paul Fercho, Engine: 572 CID big block ford, Supercharger: none Turbos: none Tires: M/T 29.5X10.5WX15 Slicks


1985 Ford Mustang lx: 8.600 @ 159.000
mike pritchard, Engine: 537ci, Tires: 30x13.50 et streets


1990 Ford Mustang LX Coupe: 8.780 @ 154.000
Clint Lynch, Engine: 418 windsor, Tires: 28x10.5


1991 Ford Mustang Turbo: 8.800 @ 161.000
Mike, Engine: 306CI, Turbos: Air Research 91mm Tires: 28X13.5X15 ET STREETS.


1985 Ford Mustang GT coupe: 8.860 @ 154.000
James Cudse, Engine: 358 W, Supercharger: Paxton Novi 2000 Tires: skinnies, Hoosier 14.5x28



©2014 DragTimes - Disclaimer