GM 2.4LD9 M45 Supercharger Kit - Cavalier | Grand Am | Alero | Sunfire for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $1180.00

Up for sale is a Brand New GM Eaton M-45 Roots Type Supercharger KitThis kit is Brand New, Never Used and everything is included to give your car a wake up call adding ~45HP @ 4.5PSI of boost.Everything from brackets, new colder spark plugs to high flow fuel injectors, hoses to new sensors are included with this complete kit (see below for full parts list).This kit should take between 5-6 hours for a complete install.This kit includes a full detailed and colored picture installation kit from GM in English/French/Spanish so even the modest mechanic can perform this installation.
This kit is CARB 50 state emissions legal
This supercharger kit is made to fit:GM 2.4L LD9 4-cylinder engineJ-Body (Chevy Cavalier & Pontiac Sunfire 00-02 - Automatic & Standard transmissions)N-Body (Pontiac Grand Am & Oldsmobile Alero 00-02 - Automatic & Standard transmissions)1999 J-Body\'s and N-Body\'s can fit this supercharger with modification
Performance increase can be added to this kit as well! Smaller pulleys are sold through vendors on the internet to increase boost pressure BUT this will raise intake temps and would require meth injection if you wanted to go that route so use caution.A WAI (warm air intake) and CAI (cold air intake) tube with a cone air filter like K&N can be added (sold separately)
After installation of this kit, your car would have to be towed or driven very conservatively to your local GM dealership for 2 reasons:1.) Inspection of the install by a certified GM tech2.) The car\'s onboard computer will need to be recalibrated with new fuel maps, timing and sensors of this kit. THIS IS REQUIRED!
The recalibration/inspection is to be done at your your local GM dealership as described on page 20 of the installation manual.The additional cost of this service is $99.00 and is not part of this sale! This is an out of pocket cost for you, please keep that in mind.
>>If you\'re trying to install this kit on a 1999 or Older LD9 vehicle, the onboard computer will not accept GM\'s recalibration. Other means of fuel/timing management will have to be added to your vehicle. For more detailed information see:j-body.org/forums/read.php?f=40&i=105987&t=105987
Premium Unleaded Fuel will be required to use every time after this kit is installed in your vehicle.
Parts included with this 100% complete kit:
1 - Supercharger Lower Bracket Support1 - Supercharger Upper Bracket Support1 - Intake air duct1- Supercharger snout support bracket lower1 - Supercharger snout support bracket upper1 - cruise control relocation bracket1 - Air Temp sensor1 - Intake air duct adapter2 - Hose clamps1 - PCV hose1 - EVAP hose to throttle body1 - Goodyear accessory drive belt1 - Brake booster hose1 - PCV bent tube2 - Hex flange bolts1 - Idler to lower nose support3 - Top/Bottom flange bolts7 - Manifold Flange bolts2 - Engine Block M10 bolts2 - Spiral lock washers3 - External tooth lock washers4 - Spiral Lock washers for Manifold & PCV tube2 - Spiral Lock Washer for MAP sensor2 - Cruise Control hex flange bolts1 - 2 Atmosphere Map Sensor4 - 5/8\" hose clamps1 - Installation Booklet with full color pictures1 - Accessory belt routing decal1 - Vehicle Product Info Label (Emissions Label)4 - High flow fuel injectors4 - AC Delco colder spark plugs1 - Premium Fuel Use Only decal1 - Vacuum cap throttle body nipple4 - Zip ties1 - Nylon flex loom1 - Barbed EVAP hose to rubber elbow1 - Wire Loom air temp sensor wire1 - PCV baffle assembly1 - Eaton M45 supercharger1 - Supercharger manifold assembly1 - Idler bracket assembly
Shipping weight is 43lbs
I accept payment through PayPal and will only ship to your verified address.
Give your J-Body or N-Body vehicle some added performance!


Parts Search:


Follow