Price: $23
This item has been shown 78066 times.
Front Wheel Hub Bearing For Chevy Impala Pontiac Grand Prix Buick 513121 5 Lug
Product either LH (Driver Side) or RH (Passenger Side)FRONT
*Fits 5 LugsWheels
*Wheel studs already installed
* Includes ABS with tegral Sensor
Item Description:
- Brand New Wheel Hub Assembly
- Direct replacement
- Built to strict quality control standards
- Replaces dealer part Fitment:
- Fits Buick Century 1997-2005
- Fits Buick LaCrosse 2005-2009
- Fits Buick LeSabre 2000-2005
- Fits Buick Lucerne 2006-2009
- Fits Buick Park Avenue 1997-2005
- Fits Buick Regal 1997-2004
- Fits Buick Rendezvous 2002-2007
- Fits Buick Riveria 1997-1999
- Fits Buick Terraza 2005
- Fits Cadillac DeVille 1997-2005
- Fits Cadillac DTS 2006-2009
- Fits Cadillac Eldorado 1997-2002
- Fits Cadillac SeVille 1997-2004
- Fits Chevrolet Impala 2000-2013
- Fits Chevrolet Monte Carlo 2000-2007
- Fits Chevrolet Uplander 2005
- Fits Chevrolet Venture 1997-2005
- Fits Oldsmobile Intrigue 1998-2002
- Fits Oldsmobile Sihouette 1997-2004
- Fits Pontiac Aztek 2001-2005
- Fits Pontiac Bonneville 2000-2005
- Fits Pontiac Grand Prix 1997-2008
- Fits Pontiac Montana 1999-2005
- Fits Saturn Relay-2 2005
- Fits Saturn Relay-3 2005
Package Include:
1 Pcs wheel hub bearing
1 Year Warranty
Exploded
- Wheel hub and bearing
- Cotter pin
- Nut retainer
- Wheel hub lock nut
- Hub bolt
- Splash guard
- Steering
- Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.
- Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
- Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
- Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
- Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
- Remove the engine side cover.
- Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
- Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
- Remove the wheel hub and bearing bolts using power tool.
- Remove the splash guard and the wheel hub and bearing from the steering
- Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
- Pull out the front wheel sensor, being careful to turn it as little as possible.
- Do not pull on wheel after removel : Check components for deformationy,cracksy,and other damagey,and boots of transverse link ball joint for cracksy,axial end play,and swing is in the reverse order of the
- Do not reuse the wheel stud.
- Do not reuse the cotter pin.
- Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
- Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
- Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock 6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.
7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.
8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.
9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.
Item SpecificsPlacement on Vehicle Driver Side or Passenger Side FrontInterchange Part Number 513121 wheel bearingsFitment For Buick Chevrolet Pontiac Saturn Cadillac OldsmobileABS Sensor Has ABS with tegral SensorBrand ECCPPWarranty 1 YearSurface Finish Polished, Rust ProtectedUPC Does not applyBolt Quantity 5Flange Bolt Hole qty 3Manufacturer Part Number ECCPP051402Spline Quantity 33Bolt Circle Diameter 4.48 InWheel Pilot Diameter 2.73 InBrake Pilot Diameter 2.75 InFlange Diameter 5.67 InFlange Shape Modified TriangleFlange Offset 1.64 InHub Pilot Diameter 3.56 InOther Part Number 12429204, 7470017, 7470105, 7470143, 7470567, 747056Material steelFitment type Direct replacementWeight 7LBPackage include 1 X wheel bearing Item SpecificsPlacement on Vehicle Driver Side or Passenger Side FrontInterchange Part Number 513121 wheel bearingsFitment For Buick Chevrolet Pontiac Saturn Cadillac OldsmobileABS Sensor Has ABS with tegral SensorBrand ECCPPWarranty 1 YearSurface Finish Polished, Rust ProtectedUPC Does not applyBolt Quantity 5Flange Bolt Hole qty 3Manufacturer Part Number ECCPP051402Spline Quantity 33Bolt Circle Diameter 4.48 InWheel Pilot Diameter 2.73 InBrake Pilot Diameter 2.75 InFlange Diameter 5.67 InFlange Shape Modified TriangleFlange Offset 1.64 InHub Pilot Diameter 3.56 InOther Part Number 12429204, 7470017, 7470105, 7470143, 7470567, 747056Material steelFitment type Direct replacementWeight 7LBPackage include 1 X wheel bearing
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.- PayPalpreferred.
Product either LH (Driver Side) or RH (Passenger Side)FRONT
*Fits 5 LugsWheels
*Wheel studs already installed
* Includes ABS with tegral SensorItem Description:
- Brand New Wheel Hub Assembly
- Direct replacement
- Built to strict quality control standards
- Replaces dealer part Fitment:
- Fits Buick Century 1997-2005
- Fits Buick LaCrosse 2005-2009
- Fits Buick LeSabre 2000-2005
- Fits Buick Lucerne 2006-2009
- Fits Buick Park Avenue 1997-2005
- Fits Buick Regal 1997-2004
- Fits Buick Rendezvous 2002-2007
- Fits Buick Riveria 1997-1999
- Fits Buick Terraza 2005
- Fits Cadillac DeVille 1997-2005
- Fits Cadillac DTS 2006-2009
- Fits Cadillac Eldorado 1997-2002
- Fits Cadillac SeVille 1997-2004
- Fits Chevrolet Impala 2000-2013
- Fits Chevrolet Monte Carlo 2000-2007
- Fits Chevrolet Uplander 2005
- Fits Chevrolet Venture 1997-2005
- Fits Oldsmobile Intrigue 1998-2002
- Fits Oldsmobile Sihouette 1997-2004
- Fits Pontiac Aztek 2001-2005
- Fits Pontiac Bonneville 2000-2005
- Fits Pontiac Grand Prix 1997-2008
- Fits Pontiac Montana 1999-2005
- Fits Saturn Relay-2 2005
- Fits Saturn Relay-3 2005
Package Include:
1 Pcs wheel hub bearing
1 Year Warranty
Exploded
- Wheel hub and bearing
- Cotter pin
- Nut retainer
- Wheel hub lock nut
- Hub bolt
- Splash guard
- Steering
- Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.
- Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
- Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
- Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
- Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
- Remove the engine side cover.
- Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
- Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
- Remove the wheel hub and bearing bolts using power tool.
- Remove the splash guard and the wheel hub and bearing from the steering
- Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
- Pull out the front wheel sensor, being careful to turn it as little as possible.
- Do not pull on wheel after removel : Check components for deformationy,cracksy,and other damagey,and boots of transverse link ball joint for cracksy,axial end play,and swing is in the reverse order of the
- Do not reuse the wheel stud.
- Do not reuse the cotter pin.
- Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
- Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
- Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock 6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.
7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.
8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.
9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.
Item SpecificsPlacement on Vehicle :Driver Side or Passenger Side FrontInterchange Part Number :513121 wheel bearingsFitment :For Buick Chevrolet Pontiac Saturn Cadillac OldsmobileABS Sensor :Has ABS with tegral SensorBrand :ECCPPWarranty : 1 YearSurface Finish :Polished, Rust ProtectedBolt Quantity :5Flange Bolt Hole qty :3Manufacturer Part Number :ECCPP051402Spline Quantity :33Bolt Circle Diameter :4.48 InWheel Pilot Diameter :2.73 InBrake Pilot Diameter :2.75 InFlange Diameter :5.67 InFlange Shape :Modified TriangleFlange Offset :1.64 InHub Pilot Diameter :3.56 InOther Part Number :12429204, 7470017, 7470105, 7470143, 7470567, 747056Material :steelFitment type :Direct replacementWeight :7LBPackage include : 1 X wheel bearing Item SpecificsPlacement on Vehicle Driver Side or Passenger Side FrontInterchange Part Number 513121 wheel bearingsFitment For Buick Chevrolet Pontiac Saturn Cadillac OldsmobileABS Sensor Has ABS with tegral SensorBrand ECCPPWarranty 1 YearSurface Finish Polished, Rust ProtectedBolt Quantity 5Flange Bolt Hole qty 3Manufacturer Part Number ECCPP051402Spline Quantity 33Bolt Circle Diameter 4.48 InWheel Pilot Diameter 2.73 InBrake Pilot Diameter 2.75 InFlange Diameter 5.67 InFlange Shape Modified TriangleFlange Offset 1.64 InHub Pilot Diameter 3.56 InOther Part Number 12429204, 7470017, 7470105, 7470143, 7470567, 747056Material steelFitment type Direct replacementWeight 7LBPackage include 1 X wheel bearing
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.- PayPalpreferred.
Copyright of eccppautoparts. All rights reserved.