Fabtech K2093M (IN STOCK) 4\" Basic System 99-00 Ford Super Duty Gas 2WD for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $1380.60

4\" Basic System w/ Stealth Monotube Shocks

Utilizing the vehicle’s stock I beams and radius arms the heavy duty 1/4” thick brackets relocate these components with extended length coil springs for increased ride height and proper front suspension geometry. System includes heavy duty brackets, drop pitman arm, front and rear performance shocks and a rear block kit.

Wheel/Tire Recommendations

  • Use 305/70 R16 tire w/ 16x8 wheels w/ 4 5/8” BS w/ minor trimming
  • Use 285/70 R17 tire w/ 17x8 wheels w/ 4 5/8” BS w/ minor trimming


Notes

  • Vehicles may require alignment after kit is installed
  • Non Dually models only
  • 5 Year 60,000 Mile Powertrain Warranty

Parts Included

  • U-Bolt (x4)
  • U-Bolt Hardware
  • Rear Block (x2)
  • I-Beam Bracket (x2)
  • Radius Arm Bracket (x2)
  • Pitman Arm
  • Coil Spring (x2)
  • Sway Bar Drop Bracket (x2)
  • Alignment Cam (x2)
  • Hardware Kit (x2)
  • Stealth Monotube Shock Absorber (x4)


Stealth Monotube Shocks

Stealth is the first all black monotube shock absorber, with an identifiable raised metal nameplate, that represents the signature of quality you can rely on for a superior ride at an affordable price. Stealth monotube shocks are built with a 46mm diameter high flow piston and vehicle specific valving, for a great ride with oversized tires. Each Stealth shock absorber has a free floating piston that separates the nitrogen gas charge from the oil to reduce shock fade in offroad conditions. All Stealth shock absorbers feature Nitrocarburized piston rods that are superior to chromed rods in durability and corrosion resistance. These\"Nitrocarb\" piston rods are finished in matte black for a complete \"black out\" shock package.

  • Monotube construction
  • 50mm OD seamless steel body
  • 46mm High flow piston for best ride
  • Vehicle specific valving designed for oversized tires
  • Full floating piston separates gas from oil for a consistent ride
  • 14mm Nitrocarb piston rod resists rock chips and corrosion
  • All black finish with raised nameplate as a signature of quality


Fabtech Suspension Accessories

  • Dual Performance Steering Stabilizer - Obtain increased steering control and reduce front end shimmy from oversized tires and wheels with a Steering Stabilizer kit. Easy fit heavy duty brackets allow for a quick installation


Fabtech 5 Year 60,000 Mile Powertrain Warranty

Fabtech provides a 5 Year 60,000 Mile Powertrain Warranty to the original retail purchaser who owns the vehicle, on which the product was originally installed, for defects in workmanship and materials. The Warranty excludes the following Fabtech items; bushings, bump stops, ball joints, tie rod ends, limiting straps, cross shafts, heim joints. These parts are subject to wear and are not considered defective when worn. They are warranted for 60 days from the date of purchase for defects in workmanship. Take apart shocks are considered a serviceable shock with a one year warranty on leakage only. Service seal kits are available separately for future maintenance. All other shocks are covered under Fabtech\'s Limited Lifetime Warranty. Fabtech does not warrant any product for finish, alterations, modifications and/or installation contrary to Fabtech’s instructions. Alterations to the finish of the parts including but not limited to painting, powdercoating, plating and/or welding will void all warranties. Some finish damage may occur to parts during shipping which is considered normal and is not covered under warranty.


Shipping/ Returns

Any and/or allproduct(s)should be inspected for quality & fitment when received. It is the responsibility of the customer to check for correct part number/correctproduct(s)and or damages & test fitproduct(s)to insure correct vehicle fitment before installing product(s). DO NOT paint or modifyproduct(s)before installing as theproduct(s)CANNOT be returned after they are painted or modified. We are notliable for damage done to your vehicle and/orproduct(s)because of oversight.ABSOLUTELY NO EXCEPTIONS!!No Returns after 30 Days of Date of Purchase.Please inspect your merchandise for damage when you receive your shipment. In the event that your merchandise is damaged, notifyPCS Custom Automotiveimmediately. You MUST make a note of the damages with the freight carrier when you sign for delivery.Only items that were purchased in the last 30 days may be returned.All products must be returned in original boxes & not used.There will be a 15% restocking fee charged on all returns with a minimum restocking fee of $15.00. There will be no exceptions to the restocking fee. Return shipping is the responsibility of the customer. Refunds will be given for the product value only. The freight incurred to get this to you is not refundable. Truck freight cost is $100.00 per pallet.Restocking fees and Freight cost will be deducted from ALL exchanges.Keep in mind that shipping is not \"free\", but it is included in the final price. A freight carrier is paid to deliver this to you. Ebay adds the Free Shipping Sticker on their own and I cannot remove it. If a return is processed the freight is not refundable from the carrier, so this is a non refundable service. If you have any questions about this, please contact us.


Parts Search:


Follow