When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $2599.00
*If purchasing, please message me if you want the dolphin style tip or regular straight tip.*FD3S 3.5" 88.9mm Modular Exhaust System with a catalytic converter. This system will bolt to the factory or aftermarket 3" downpipe.These are the highest quality repackable mufflers around. They contain scrubble packing to hold up to the high exhaust temps of rotary engines. No other packing material will hold up over time.Includes:
3.5" inlet/outlet metallic catalytic converter3.5" mid pipe muffler/resonator3.5" dual stage mufflerAs shown in the pictures the mid section can utilize either the catalytic converteror muffler depending on usage. For street use, the cat will be best to reduce noise, eliminate exhaust odor, and help control boost levels for those on factory twins. If you're heading to a track event, simply loosen the four 15mm bolts, remove cat, install muffler, go racing.
Exhaust system overview:
-Stainless Steel construction
-Largest possible, yet high flowing mufflers to reduce noise and drone with the large 3.5” piping. One muffler OR cat in the midpipe and one large two stage muffler in the rear.
-Proper high temperature scrubble packing. THIS IS KEY, other mufflers internal material can degrade over time due to the rotary’s high EGT’s, common lack of cats, and will start to drone over time.
-Bolts to factory twin turbo downpipe! Even if your downpipe is only 3" this will bolt to it as there is a reducer welded in. Perfect for owners who will chop that off later when moving to a 3.5” downpipe from a single turbo etc…
-Modular. Some might ask why the mufflers are not welded to the piping? 1: The piping is meant to be sent to your favorite ceramic coater to further improve performance and heat management. 2: This will allow you to swap in the cat if you so desire. 3: If you ever go single turbo you can simply replace the front section or cut off the 3" flange to bolt to a 3.5" downpipe.
-Light weight. ~27lb for the midsection and rear section!
-Clears all factory braces
-Dolphin or straight tip*This system is for off-road use only*