Dodge Throttle Body Chrysler 200 Jeep Compass Patriot Caliber Journey Avenger for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $79.89

listing

Throttle Body Chrysler 200 Dodge Jeep Caliber Journey Avenger 1.8L 2.0L 2.4L

Description:

The electronic throttle unit opens and closes the throttle blade based on input from various engine control sensors, including the accelerator pedal.

Features:

Quality: ROHS; ISO/TS16949; ISO9001:2008.

Quality & Fitment Tested.

Top quality Aftermarket part.

Replace for OEM number:

#04891735AC

Package:

1 * Throttle Body

Item number:

THRB-JP001


Suit:

2011-2016 CHRYSLER 200 1.8L 2.0L 2.4L

Also fit

2007-2012 DODGE CALIBER 1.8L 2.0L 2.4L

2008-2014 DODGE AVENGER 1.8L 2.0L 2.4L

2009-2016 DODGE JOURNEY 1.8L 2.0L 2.4L

2007-2016 JEEP PATRIOT 1.8L 2.0L 2.4L

2007-2016 JEEP COMPASS 1.8L 2.0L 2.4L

How to Replace Throttle Body

Things You'll Need

Common screwdriver

Set of ¼-inch sockets

¼-inch ratchet

Needle nose pliers

Step 1: Remove the air cleaner and duct hose assembly using the common screwdriver. Disconnect the electrical connector on the mass air flow by pulling out the plug. Disconnect the intake air temperature sensor found in the air duct.

Step 2: Disconnect the idle air control on the side of the throttle body by pulling the electrical connector out. Disconnect the throttle position sensor opposite the throttle cable levers.

Step 3: Disconnect the throttle cables by turning the throttle lever on the throttle body all the way open by hand and then removing the now slackened cables from the throttle lever.

Step 4: Remove the heated water hoses from the bottom of the throttle body if there are any (this is vehicle dependent). Use the needle nose pliers to remove the clamps by squeezing the clamps and pulling them off. Pull the hoses off. Not all vehicles have these, although there are a few that do.

Step 5: Remove the four bolts running through the throttle body and into the intake manifold. Use appropriate ¼-inch drive socket and ratchet. Lift the throttle body off the intake manifold. Protect the metal gasket that is in between the throttle body and intake. This gasket must be reused. Install the new throttle body and components in reverse order of removal.







Parts Search:


Follow