DD Racing 4-Points Front Strut Brace Bar For |Wira|Satria|Evo 1/2/3|Mirage| for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $196.00

JDM-MOTORPARTS

  • OUR STORE
  • SALES
  • SHIPPING
DD Racing 4-Points Front Strut Brace Bar For |Wira|Satria|Evo 1/2/3|Mirage| ITEM SPECIFICATIONS
  • Brand:Unbranded
  • MPN:Does not apply
  • Manufacturer Part Number:UR-TW4-003
  • Placement on Vehicle:Front
  • Country/Region of Manufacture:Taiwan
  • Type:Strut Bar
DESCRIPTION



Item Description:

Front Strut Bar is the tools which mounted at the front chassis for strengthening purposes. To eliminate the noise which made by the suspensions and giving better stability during the acceleration. Also hard driving and braking performance (for simulating race track's conditions). front chassis of every vehicle is totally different therefore designs and also develops front strut bars based on the tested actual conditions of the vehicle‚ repeatly testing and providing to its perfection as well. High attention is taken during the design and development stage to ensure the chassis is able to withstand the load when a bar is being installed. D&D is proud to bring you the the multi-point Front Strut Bar. This 4 points front strut bar is designed to reduce this strut tower flex during hard cornering by tying two parallel strut towers together in the same moment. This also could transmits the load of each strut tower during cornering‚ which ties the two towers together and reduces chasis flex as well.

It fits your

- 1992 - 1994 Mitsubishi Lancer Evolution I [ CD9A ]

- 1994 - 1995 Mitsubishi Lancer Evolution II [ CE9A ]

- 1995 - 1996 Mitsubishi Lancer Evolution III [ CE9A ]

- 1992 - 1995 Mitsubishi Lancer CC ( a.k.a. Mitsubishi Mirage )

[ CA1A / CA2A / CA3A / CA4A / CA5A / CB1A / CB2A / CB3A / CB4A / CB5A / CB6A / CB7A / CB8A / CC3A / CC4A / CD3A / CD5A / CD7A / CD8A ]

- 1993 - 2009 Proton Wira ( a.k.a. Proton 400 Series )

- 1994 - 2005 Proton Satria ( a.k.a. Proton 300 Series / Proton Cact )

- 1996 - 2001 Proton Putra ( a.k.a. Proton Coupe / M21 )






Specification: The brackets are made of 4mm to 5mm steel plates‚ the hollow steel tubes and oval tubes are 1.2mm to 1.6mm of thickness. These materials are selected to ensure the bars are strong to maintain constant geometry at all times and ever‚ yet safe enough to crumble during an impact in order to disperse energy.

Further‚ you will never see an D&D bar with mounting plates attached with bolts. All D&D mounting plates are welded to the bars. It has minimal rigidity because energy dispersal is concentrated at the bolt mounts are not along with the whole bar. Further‚ bolts can sheer off during an impact reducing the dispersal of energy. In fact‚ these bars can become a dangerous‚ lose piece of metal creating an additional hazard rather than a protection.

To protect against the elements and corrosion‚ all of the D&D bars are powder coated to an aesthetically pleasing white color.

Packing Size : 117 x 30 x 14 cm
Packing Size : 46.07 x 11.82 x 5.52 Inches

Packing Weight : 10 KG
Packing Weight : 22 Ibs 0.74 Oz

L-MLO

Payment Shipping Return Payment Info

Payment methods: PayPal & Credit Card payment via PayPal Services. Please make sure the eBay mailing address is correct and same as PayPal address. If not, parcel will be delivered following PayPal address unless we’ve been informed. Any additional order/purchase will not include if payment has made / completed and checkout from the payment gateway.

Shipping Info


Your satisfaction is our priority and we are constantly improving our operations to provide the best service for you.


All purchases will be shipped within 2 business days after your payment is cleared by PayPal.


The parcel will be left in front of the door, once the delivery agent found nobody at home or office
International Shipping We don't cover custom duties or state taxes. Please check if it's applicable to you with your country Custom Policy, prior to purchase. If it's applicable, buyer has to bear the cost.


  • No dispatch / delivery service on weekend and public holidays
  • Postage Exclude PO Box / APO / FPO
RETURN POLICY

We are handled your order with care and attention. All products will be checked thoroughly before posting.


An exchange/replacement or Money Refund services will be provided if the product has delivered in faulty /damage / defect or seller delivered wrong item.


We will charge a 15% restocking fee for the return, unless the item is returned due to damage, defects, or not-as-described in the listing.


Should you notice you have bought the wrong item / size, please do not hesitate write to us or leave us message. We are willing to make it right to you. Please ensure the wrong product you have been ordered/purchased is in original, unused condition including the parcel box / in wrapped packaging together with UPC bar code. Any soiled, scratches, damages, resizing, altering of any part of the product will be charged an additional fees. Photos are advisable and preferable.

Store Categories
  • Store Home
  • 4x4 Accessories
    • AfterMarket
      • Exterior
        • Interior
          • Suspension
            • JDM USED PARTS
              • PERFORMANCE
                • Other
                  jdm-motorparts DD Racing 4-Points Front Strut Brace Bar For |Wira|Satria|Evo 1/2/3|Mirage|
                  FEATURES
                  • Brand Unbranded
                  • MPN Does not apply
                  • Manufacturer Part Number UR-TW4-003
                  • Placement on Vehicle Front
                  • Country/Region of Manufacture Taiwan
                  • Type Strut Bar
                  HIGHLIGHTS



                  Item Description:

                  Front Strut Bar is the tools which mounted at the front chassis for strengthening purposes. To eliminate the noise which made by the suspensions and giving better stability during the acceleration. Also hard driving and braking performance (for simulating race track's conditions). front chassis of every vehicle is totally different therefore designs and also develops front strut bars based on the tested actual conditions of the vehicle‚ repeatly testing and providing to its perfection as well. High attention is taken during the design and development stage to ensure the chassis is able to withstand the load when a bar is being installed. D&D is proud to bring you the the multi-point Front Strut Bar. This 4 points front strut bar is designed to reduce this strut tower flex during hard cornering by tying two parallel strut towers together in the same moment. This also could transmits the load of each strut tower during cornering‚ which ties the two towers together and reduces chasis flex as well.

                  It fits your

                  - 1992 - 1994 Mitsubishi Lancer Evolution I [ CD9A ]

                  - 1994 - 1995 Mitsubishi Lancer Evolution II [ CE9A ]

                  - 1995 - 1996 Mitsubishi Lancer Evolution III [ CE9A ]

                  - 1992 - 1995 Mitsubishi Lancer CC ( a.k.a. Mitsubishi Mirage )

                  [ CA1A / CA2A / CA3A / CA4A / CA5A / CB1A / CB2A / CB3A / CB4A / CB5A / CB6A / CB7A / CB8A / CC3A / CC4A / CD3A / CD5A / CD7A / CD8A ]

                  - 1993 - 2009 Proton Wira ( a.k.a. Proton 400 Series )

                  - 1994 - 2005 Proton Satria ( a.k.a. Proton 300 Series / Proton Cact )

                  - 1996 - 2001 Proton Putra ( a.k.a. Proton Coupe / M21 )






                  Specification: The brackets are made of 4mm to 5mm steel plates‚ the hollow steel tubes and oval tubes are 1.2mm to 1.6mm of thickness. These materials are selected to ensure the bars are strong to maintain constant geometry at all times and ever‚ yet safe enough to crumble during an impact in order to disperse energy.

                  Further‚ you will never see an D&D bar with mounting plates attached with bolts. All D&D mounting plates are welded to the bars. It has minimal rigidity because energy dispersal is concentrated at the bolt mounts are not along with the whole bar. Further‚ bolts can sheer off during an impact reducing the dispersal of energy. In fact‚ these bars can become a dangerous‚ lose piece of metal creating an additional hazard rather than a protection.

                  To protect against the elements and corrosion‚ all of the D&D bars are powder coated to an aesthetically pleasing white color.

                  Packing Size : 117 x 30 x 14 cm
                  Packing Size : 46.07 x 11.82 x 5.52 Inches

                  Packing Weight : 10 KG
                  Packing Weight : 22 Ibs 0.74 Oz

                  L-MLO



                  Item Description:

                  Front Strut Bar is the tools which mounted at the front chassis for strengthening purposes. To eliminate the noise which made by the suspensions and giving better stability during the acceleration. Also hard driving and braking performance (for simulating race track's conditions). front chassis of every vehicle is totally different therefore designs and also develops front strut bars based on the tested actual conditions of the vehicle‚ repeatly testing and providing to its perfection as well. High attention is taken during the design and development stage to ensure the chassis is able to withstand the load when a bar is being installed. D&D is proud to bring you the the multi-point Front Strut Bar. This 4 points front strut bar is designed to reduce this strut tower flex during hard cornering by tying two parallel strut towers together in the same moment. This also could transmits the load of each strut tower during cornering‚ which ties the two towers together and reduces chasis flex as well.

                  It fits your

                  - 1992 - 1994 Mitsubishi Lancer Evolution I [ CD9A ]

                  - 1994 - 1995 Mitsubishi Lancer Evolution II [ CE9A ]

                  - 1995 - 1996 Mitsubishi Lancer Evolution III [ CE9A ]

                  - 1992 - 1995 Mitsubishi Lancer CC ( a.k.a. Mitsubishi Mirage )

                  [ CA1A / CA2A / CA3A / CA4A / CA5A / CB1A / CB2A / CB3A / CB4A / CB5A / CB6A / CB7A / CB8A / CC3A / CC4A / CD3A / CD5A / CD7A / CD8A ]

                  - 1993 - 2009 Proton Wira ( a.k.a. Proton 400 Series )

                  - 1994 - 2005 Proton Satria ( a.k.a. Proton 300 Series / Proton Cact )

                  - 1996 - 2001 Proton Putra ( a.k.a. Proton Coupe / M21 )






                  Specification: The brackets are made of 4mm to 5mm steel plates‚ the hollow steel tubes and oval tubes are 1.2mm to 1.6mm of thickness. These materials are selected to ensure the bars are strong to maintain constant geometry at all times and ever‚ yet safe enough to crumble during an impact in order to disperse energy.

                  Further‚ you will never see an D&D bar with mounting plates attached with bolts. All D&D mounting plates are welded to the bars. It has minimal rigidity because energy dispersal is concentrated at the bolt mounts are not along with the whole bar. Further‚ bolts can sheer off during an impact reducing the dispersal of energy. In fact‚ these bars can become a dangerous‚ lose piece of metal creating an additional hazard rather than a protection.

                  To protect against the elements and corrosion‚ all of the D&D bars are powder coated to an aesthetically pleasing white color.

                  Packing Size : 117 x 30 x 14 cm
                  Packing Size : 46.07 x 11.82 x 5.52 Inches

                  Packing Weight : 10 KG
                  Packing Weight : 22 Ibs 0.74 Oz

                  L-MLO



                  Item Description:

                  Front Strut Bar is the tools which mounted at the front chassis for strengthening purposes. To eliminate the noise which made by the suspensions and giving better stability during the acceleration. Also hard driving and braking performance (for simulating race track's conditions). front chassis of every vehicle is totally different therefore designs and also develops front strut bars based on the tested actual conditions of the vehicle‚ repeatly testing and providing to its perfection as well. High attention is taken during the design and development stage to ensure the chassis is able to withstand the load when a bar is being installed. D&D is proud to bring you the the multi-point Front Strut Bar. This 4 points front strut bar is designed to reduce this strut tower flex during hard cornering by tying two parallel strut towers together in the same moment. This also could transmits the load of each strut tower during cornering‚ which ties the two towers together and reduces chasis flex as well.

                  It fits your

                  - 1992 - 1994 Mitsubishi Lancer Evolution I [ CD9A ]

                  - 1994 - 1995 Mitsubishi Lancer Evolution II [ CE9A ]

                  - 1995 - 1996 Mitsubishi Lancer Evolution III [ CE9A ]

                  - 1992 - 1995 Mitsubishi Lancer CC ( a.k.a. Mitsubishi Mirage )

                  [ CA1A / CA2A / CA3A / CA4A / CA5A / CB1A / CB2A / CB3A / CB4A / CB5A / CB6A / CB7A / CB8A / CC3A / CC4A / CD3A / CD5A / CD7A / CD8A ]

                  - 1993 - 2009 Proton Wira ( a.k.a. Proton 400 Series )

                  - 1994 - 2005 Proton Satria ( a.k.a. Proton 300 Series / Proton Cact )

                  - 1996 - 2001 Proton Putra ( a.k.a. Proton Coupe / M21 )






                  Specification: The brackets are made of 4mm to 5mm steel plates‚ the hollow steel tubes and oval tubes are 1.2mm to 1.6mm of thickness. These materials are selected to ensure the bars are strong to maintain constant geometry at all times and ever‚ yet safe enough to crumble during an impact in order to disperse energy.

                  Further‚ you will never see an D&D bar with mounting plates attached with bolts. All D&D mounting plates are welded to the bars. It has minimal rigidity because energy dispersal is concentrated at the bolt mounts are not along with the whole bar. Further‚ bolts can sheer off during an impact reducing the dispersal of energy. In fact‚ these bars can become a dangerous‚ lose piece of metal creating an additional hazard rather than a protection.

                  To protect against the elements and corrosion‚ all of the D&D bars are powder coated to an aesthetically pleasing white color.

                  Packing Size : 117 x 30 x 14 cm
                  Packing Size : 46.07 x 11.82 x 5.52 Inches

                  Packing Weight : 10 KG
                  Packing Weight : 22 Ibs 0.74 Oz

                  L-MLO



                  Item Description:

                  Front Strut Bar is the tools which mounted at the front chassis for strengthening purposes. To eliminate the noise which made by the suspensions and giving better stability during the acceleration. Also hard driving and braking performance (for simulating race track's conditions). front chassis of every vehicle is totally different therefore designs and also develops front strut bars based on the tested actual conditions of the vehicle‚ repeatly testing and providing to its perfection as well. High attention is taken during the design and development stage to ensure the chassis is able to withstand the load when a bar is being installed. D&D is proud to bring you the the multi-point Front Strut Bar. This 4 points front strut bar is designed to reduce this strut tower flex during hard cornering by tying two parallel strut towers together in the same moment. This also could transmits the load of each strut tower during cornering‚ which ties the two towers together and reduces chasis flex as well.

                  It fits your

                  - 1992 - 1994 Mitsubishi Lancer Evolution I [ CD9A ]

                  - 1994 - 1995 Mitsubishi Lancer Evolution II [ CE9A ]

                  - 1995 - 1996 Mitsubishi Lancer Evolution III [ CE9A ]

                  - 1992 - 1995 Mitsubishi Lancer CC ( a.k.a. Mitsubishi Mirage )

                  [ CA1A / CA2A / CA3A / CA4A / CA5A / CB1A / CB2A / CB3A / CB4A / CB5A / CB6A / CB7A / CB8A / CC3A / CC4A / CD3A / CD5A / CD7A / CD8A ]

                  - 1993 - 2009 Proton Wira ( a.k.a. Proton 400 Series )

                  - 1994 - 2005 Proton Satria ( a.k.a. Proton 300 Series / Proton Cact )

                  - 1996 - 2001 Proton Putra ( a.k.a. Proton Coupe / M21 )






                  Specification: The brackets are made of 4mm to 5mm steel plates‚ the hollow steel tubes and oval tubes are 1.2mm to 1.6mm of thickness. These materials are selected to ensure the bars are strong to maintain constant geometry at all times and ever‚ yet safe enough to crumble during an impact in order to disperse energy.

                  Further‚ you will never see an D&D bar with mounting plates attached with bolts. All D&D mounting plates are welded to the bars. It has minimal rigidity because energy dispersal is concentrated at the bolt mounts are not along with the whole bar. Further‚ bolts can sheer off during an impact reducing the dispersal of energy. In fact‚ these bars can become a dangerous‚ lose piece of metal creating an additional hazard rather than a protection.

                  To protect against the elements and corrosion‚ all of the D&D bars are powder coated to an aesthetically pleasing white color.

                  Packing Size : 117 x 30 x 14 cm
                  Packing Size : 46.07 x 11.82 x 5.52 Inches

                  Packing Weight : 10 KG
                  Packing Weight : 22 Ibs 0.74 Oz

                  L-MLO

                  PAYMENT Payment Info

                  Payment methods: PayPal & Credit Card payment via PayPal Services. Please make sure the eBay mailing address is correct and same as PayPal address. If not, parcel will be delivered following PayPal address unless we’ve been informed. Any additional order/purchase will not include if payment has made / completed and checkout from the payment gateway.

                  SHIPPING Shipping Info


                  Your satisfaction is our priority and we are constantly improving our operations to provide the best service for you.


                  All purchases will be shipped within 2 business days after your payment is cleared by PayPal.


                  The parcel will be left in front of the door, once the delivery agent found nobody at home or office
                  International Shipping We don't cover custom duties or state taxes. Please check if it's applicable to you with your country Custom Policy, prior to purchase. If it's applicable, buyer has to bear the cost.


                  • No dispatch / delivery service on weekend and public holidays
                  • Postage Exclude PO Box / APO / FPO
                  RETURN RETURN POLICY

                  We are handled your order with care and attention. All products will be checked thoroughly before posting.


                  An exchange/replacement or Money Refund services will be provided if the product has delivered in faulty /damage / defect or seller delivered wrong item.


                  We will charge a 15% restocking fee for the return, unless the item is returned due to damage, defects, or not-as-described in the listing.


                  Should you notice you have bought the wrong item / size, please do not hesitate write to us or leave us message. We are willing to make it right to you. Please ensure the wrong product you have been ordered/purchased is in original, unused condition including the parcel box / in wrapped packaging together with UPC bar code. Any soiled, scratches, damages, resizing, altering of any part of the product will be charged an additional fees. Photos are advisable and preferable.




                  Parts Search:


                  Follow