When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $64.74
Custom Dash Cover
For Your Vehicle
^^^Vehicle/Part Specific Photo ^^^
To tell us about your color choice,
Click Here: Color Choice and Sensor OptionInformation Form!
Photos BELOWin this listing are just examples they are not vehicle specific - shown so you can see different colors- you will receive the dash cover for your vehicle!!
(sample photo)
Why Purchase a Dash Cover?
First and foremost, a dash cover provides protection from sunlight, heat and dust.
Sunlight
Sunlight constantly works against your dash.
After just a few years of prolonged exposure to the Ultra Violet rays,
your dash will fade and no longer match your interior.
A dash cover creates a barrier that keeps interior color looking fresh.
Heat
Heat can cause your dash to buckle.
Soaring temperatures eventually cause the air molecules
in your dash to expand, rupturing the surface.
A dash cover disperses the heat across its fabric surface, shielding the dashboard.
Dust
Dust and dirt regularly collect on your dash surface.
A dash cover simply swallows the dust,
which is infinitely less visible when resting between carpet/velour fibers.
It can be vacuumed clean at the same time you do the rest of your interior.
Why ours?
You won\'t be getting a \"stock\" dash cover that doesn\'t fit.We specialize in a custom fit that is sewn by experienced sewers using zig-zag, straight stitch and precise edge binding machines. Special cuts for sensors, airbags, satellite radios and other components are also available.
You won\'t be getting rough, stock grade fabrics.
OurCarpet
We uses non-woven carpet material and matching solar guard edge binding. All are polyester for consistent color, maximum color fastness and UV resistance!
We offerVelour, Suade, Camouflage, and Tech Fabric - for an Upgrade Fee....let us know when you purchase you\'d like to upgrade and we\'ll invoice you the upgrade fee.
OurDash Covers are really easy to install.
There\'s no glue and no mess! Velcro adhesive makes the installation a breeze. Download our installation instructions and see how easy it can be.
Weoffer a wide selection of colors.
We have over a dozen colors each for our carpet and velour fabric selections. You\'re certain to get the right color for your interior.
Our Dash Cover Kits use self-adhesive Velcro for easy installation.
Ourdash covers are made with foam-backed top quality fabric to help protect the dash board from the damaging direct sun-light and extremee heat.
Our dash cover is cut and sewn to perfectly match your dash board. We include allowance for air vents and safety air bags, if present.
All Dash Covers come in an array of colors and materials.
See the chart below:
Carpet - Made withnon-woven carpet material and matching solar guard edge binding.Dyed Polyester for consistent color, maximum color fastness and maximum UV Ultraviolet protection! This is less expensive and tends to be a bit stiffer than the other materials below. Velour - Upgrade Fee of $5 - Made with a 3 layer factory bonded construction: a Velour Upholstery Fabric on top (face), a foam core and a special scrim fabric backing. It is permanently bonded together in a flash oven process that does not use adhesives. Face materials are Solution Dyed Polyester with high UV protection, consistent color and maximum color fastness over time. Edge binding is color matching Velour Fabric. This material choice will provide a soft feel, adjust extremely well to the dash contours and provide a smoother look. Velour does have a different color chart...let us know if you would like to see it.
Suede - Upgrade Fee of $5 - Suede is similar to the Velour mentioned above except the face fabric is an upholstery grade suede material instead of Velour. It has a very nice smooth look. Edge binding is done with color matched Velour material. Suede does have a different color chart...let us know if you would like to see it. Tech Fabric - Upgrade Fee of $10 - Tech Fabric has a face fabric that is one of the modern \"Technical\" fabrics you see in new vehicle seat upholstery. It has a small square weave pattern and looks a bit 3 dimensional on the surface. Edge binding is done with matching Dashtech fabric. Tech Fabric does have a different color chart...let us know if you would like to see it. Camouflage - Upgrade Fee of $10 - Camouflage has the famous \"Superflauge Game\" pattern by Lynch as the face fabric. Edge binding is one color.
Install is easy! – Please follow instructions below:
! Handling: Never fold the dashcover! Always re-roll carefully for storage. Don’t put heavy objects on the Dash Cover, as they can leave permanent marks or indentations!
Installing:
1. Clean your dash before installing. Use provided alcohol pad to clean area where Velcro will be applied.
2. Place Dash Cover on the dash making sure vents and other features line up, use hands to form to contours.
3. IMPORTANT! Push Dash Cover edge into the gap between the windshield glass and the dash.
4. Cut provided Velcro strips into small pieces and match them to the sewn Velcro on back side of Carpet dashcovers or anywhere desired on back side of Velour, Suede,
DashTech & Camo Dash Covers. DO NOT REMOVE backing on adhesive until you are sure the dashcover is located exactly how you want it to be.
5. Pull the backing off the Velcro adhesive in one area at a time. Start at one of the edges near the windshield and work across to the other side. It is very important to clean the
spot on the dash where the Velcro will be applied.
6. Your new Dash Cover will form to the dash over time and with the heat generated by sun through the windshield. This can take several days or weeks depending on weather
conditions
Sensors: many vehicles have sensors on the dash. Their location varies widely by make, model and trim level. On some vehicles, the sensor is incorporated into the windshield vent
and no extra cutting is required. In other cases, a sensor may be an option (not on all vehicles of a model). In these cases, your Dash Cover will be marked with the sensor
location on the back side but will not be cut unless requested at time of ordering. Typically, sensor holes are too small to have sewn binding edges.
Speakers: Sound passes through the dashcover quite well so no cutouts are made. Speaker cutouts can be requested on some models when ordering (added cost) but this is not
recommended for best dash protection.
Defrosting Vents: Make sure to fasten the dashcover well around vents. Make a test with fan on full to see if it is secure. Depending on the model, the Dash Cover design may extend over the edges of vents. This will help protect the vent walls from developing cracks.
Cleaning your dashcover: Hand wash with mild detergent in cold water. Air dry.
FAQsWhen will my Dash Cover Ship and How long will it take to get to me?The Factorymakes Dash Covers Monday through Thursday every week. Once we have all your vehicle information and color choice, in most casesthey shipthe next business day, especially for the holiday periods. Our basic shipping is USPS Priority Mail. We do not consolidate orders over a week or two for manufacturing planning nor do we have them made in another country like some other Dash Cover companies! How does the Dashcover fit to the design of my vehicle\'s dash? We make all our own patterns and we do it by working directly on each vehicle model including models that have options that effect the dash. Our design philosophy is to fit the dash geometry with the best look possible and make sure the coverage is proper for a rich look. Design is part science and part art. We take into account for all the vents, sensors, gauges, displays, options like larger screens for NAV\'s, etc. We do not design our patterns to cut corners on material or labor. We strive to make the best looking, best fitting dashcover for each vehicle. It is our goal to put up pictures of actual Dashcovers for each model vehicle so you can see the design. When looking at the pictures, remember that they are on a flat surface and not on the complicated geometry of a dash. What about AirBags? Starting in the early 1990\'s and depending on your Make/Model and option package, your vehicle may have an Airbag built into the dash on the Passenger side. Many vehicle have a visible Airbag panel. In more recent vehicles, you may not be able to tell exactly where the Airbag is placed because there is no visible panel. When they first arrived on the scene it was thought that dash covers needed to have a cut out for the airbag to deploy if there is a great distance between the edge of the dashcover and the Airbag panel. Many of our patterns have such a cutout. But many patterns do not because the panel is either close to the edge or there is no visible panel. We see a few requests to not make the airbag flap cut because some people prefer the look without it. The Airbag will definately deploy whether or not there is a cutout. What about speakers in the dash? We do not make cutouts for speakers. We feel this would defeat the purpose of the dashcover to protect the dash. Sound will travel through the dashcover material quite well so no cutout is needed. Trust us on this - leave them covered. What if my vehicle has sensors on the dash for Automatic Headlights or Automatic Climate Control? When possible, we make our design to include the sensor cutout within a vent cutout so the \"cut\" is automatic. That way you don\'t need to know if you have a sensor or if you need to specify you need it cut. Typically, sensors are small and round, about 1\" diameter. Sometimes they are not positioned in a vent, then a separate cut must be made. Sometimes every vehicle made for a model has a sensor - in other words it is not an option but a standard feature. Most of the time it\'s an option and your vehicle may or may not need to have it cut. If the sensor is separate, we always mark it\'s position on the bottom side. We do not cut unless we know it is for 100% of the vehicles of that model or if you tell us you have a sensor that needs to be cut. FYI, the cuts are so small that no edge binding issewn there.Check out MORE great items we carry at Autonotions
Ordering is a simple process!
Prior to hitting buy it now:
Please! complete the info form link below. This is the only way
to make sure we have all the information we need
to ship you the correct item.
To tell us about your color choice,
Click Here: Color Choice and Sensor OptionInformation Form!
Once you have completed the form just hit \"Buy It Now\"
That\'sall there is to it!
If we have questions, we will contact you prior to processing your order
We take customer care and satisfaction Very Seriously.
Making a sale is the easiest part of any transaction.
The important thing is to make sure
you are pleased with the purchase after the sale. I hope you will take a moment to
review my Ebay Feedback and buy with confidence!
Thank you for looking at my auction!