When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $1196.94
Chevrolet Performance 19256514 LS 5.3L Engine Control Kit;This controller is engineered for the following enginecodes, which feature 58X ignition systems:
LC9 (2005-2009)
LH8 (2008-2009)
LY5 (2007-2009)
LMF (2008-2009)
LMG (2007-2009)
Installation Notes:Installing the ECM - The ECM is the brain of the controller. It is weather-resistantand can be mounted under the hood, but it should be placed to avoid extremeheat and away from potential splash. Chevrolet Performance does not recommendmounting it directly to the engine.
Accelerator pedal - Chevrolet Performance\'s controller kits are designed for usewith factory-type electronic throttles (no conventional throttle cable) that requirea matched accelerator pedal. The pedal contains an electronic sensor that conveysto the controller when and how much to open the throttle. The pedal shouldme mounted at least 2.5 inches to the right of the brake pedal and 2 inchesbelow it. There should be at least 0.75-inch clearance between the pedal and thetransmission tunnel/center console. The pedal has a wire harness that connectsto the controller, requiring it to be fed through the firewall - possibly requiring anew hole. Use a grommet on the hole to prevent chafing of the harness.
MAF - The mass airflow meter that comes with some Chevrolet Performancecontroller kits must be mounted in a 4-inch-diameter tube that has at least a6-inch-long straight section. The kit includes the bracket and mounting bossesonto which the meter is secured on the tube - the tube must be cut to allowthe meter to hang inside of it. The meter sensor must be mounted at the centerof the straight section, making sure that is at least 10 inches from the throttlebody. Orienting the MAF is essential for proper operation. The meter\'s sensorshould be mounted with the connector end pointed between horizontal and fullyupright.
Oxygen sensors - The oxygen sensors (one for each side of the exhaust) mustbe inserted in the exhaust stream ahead of the catalytic converters (if used).Holes are simply drilled into the exhaust tubing and the mounting bosses weldedto them. After that, the oxygen sensors simply screw onto the mounting bossesand are connected to the wire harness. Payment
We accept the following forms of payment.
- PayPal
- Visa
- MasterCard
- American Express
- Discover
For shipments to Ohio addresses, we are required by State law to collect Sales Tax.
ShippingStandard shipping is 1-5 business day delivery on most items.
Additional delivery days may apply in some instances, such as hazardous items, mounted tires and wheels, oversized items, truck freight items, select zip codes, Global Shipping Program and remote delivery areas.
Contact InformationJEGS High Performance
101 Jeg\'s Place
Delaware, Ohio 43015
Call Us 24/7!
US: [phone removed by eBay]
International: +1-614-294-5050
If you are not completely satisfied, return the new/unused item in the original box pre-paid (customer is responsible for shipping cost) postmarked within 90 days of purchase, with a copy of the invoice, for a refund/exchange. Once a return has been approved, the credit will be processed within 2 days to original form of payment. A 15% restocking fee will be deducted from any item returned more than 90 days after the ship date. A 15% reboxing fee will be deducted for any item not returned in its original packaging.