When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $7.50
This is thegenuine NGK spark plug. Please check the above compatibility list to see if it fits your car.
Product Specifications:
Parts Information:Before purchase this parts, please check the compatibility information or call your local dealer to verify the correct OEM part number.
Shipping Details:We will ship to most US States with USPS Priority or first class mail service; Canada and other countries will be international rate with 7-14 days first class mail service.
Returns:We offer a 30 days return policy FROM DATE OF PURCHASE on thisitem. Items must be returned in new condition with original packaging. All returns due to our error will receive a full refund, including shipping. All other returns will incur a 20% restocking fee and no reimbursement of shipping fees.
Warranty:We offerLIFE TIME WARRANTYon this parts! Warranty is forREPLACEMENTof the parts only. If there is a problem with the item please notify us prior to altering or installing the item. Altered, abused, or improperly installed/maintained items will void the warranty and are not returnable. Warranty is not transferable. Warranty does not cover shipping, labor, towing, rentals, storage, legal fees, lost wages or any other incidental fees.
=====For=====Your=====Information=====
Know about theGaping Iridium Power spark plug:
Before attempting to gap any Iridium Power spark plug, please review the specification chart in the front of this catalog to verify the factory-preset gap. In most cases your Iridium Power plugs do not need to be gapped. Even with small variations in the factory set gap the ultra-efficient firing power design will compensate for those small variations.
Should you decide to re-gap your Iridium Power plug, use extreme caution as improper gapping may damage or destroy the Iridium center electrode or porcelain center.
To increase the gap size:
Step 1: Use needle nose pliers or spark plug gapping tool to bend the ground strap up to the desired height. DO NOT LET THE PLIERS OR GAPPING TOOL TOUCH THE IRIDIUM CENTER ELECTRODE OR PORCELAIN.
Step 2: Re-check the gap with a calibrated gapping tool.
To decrease the gap size:
Step 1:Use the same method as above, however bend the ground strap down to the desired height. DO NOT LET THE PLIERS OR GAPPING TOOL TOUCH THE IRIDIUM CENTER ELECTRODE OR PORCELAIN.
Step 2: Re-check the gap with a calibrated gapping tool. WARNING: Failure to follow these directions may permanently damage the spark plug. Note: Never use a round gapping tool to check the gap or to increase or decrease the gap setting.
WARNING: Failure to follow these directions may permanently damage the spark plug. Note: Never use a round gapping tool to check the gap or to increase or decrease the gap setting.
- Laser welded Iridium center electrode tip
- Platinum disc welded to backside of ground electrode provides long life
- Trivalent Metal Plating for superior anti-corrosion and anti-seizing
- Tapered ground electrode to minimize quenching
- Consistent and stable spark
- Faster starts and quicker acceleration
- Better fuel economy and lower emissions
Spark Plug Type Performance Differences
Know about thespark plug Installation:
Installation Key Points:
1. The threaded area of the cylinder head must be clean.
2. Using your fingers, screw the spark plug into the cylinder head, and tighten about 1/4-1/2 turn with a plug wrench. (Taper seat plug: about 1/16 turn)
3. Tightening too much may cause distortion of the plug housing, and in extreme cases could cause engine damage. Therefore, proper installation of the spark plug is important for life and performance of the spark plug.
Plug SizeCast Iron HeadsAluminum HeadsN*mlb-ftN*mlb-ft10mm Flat Seat10-157-1110-157-1112mm Flat Seat15-2511-1815-2511-1814mm Flat Seat35-4026-3020-3015-2214mm Taper Seat9-207-159-207-1518mm Flat Seat43-5232-3838-4628-3418mm Taper Seat20-2715-2020-2715-20Note:The installation torque values shown above apply to new spark plugs without lubricating the threads. If threads are lubricated, the torque value should be reduced by approximately 1/2 to avoid over-tightening.* 1N*m = 0.1020 kgf*mInstallation Procedure:
Whenever possible it is recommended that the spark plug should be installed by using a torque wrench. If a torque wrench is not available, tighten in the following manner.FLAT SEAT PLUGS
TAPER SEAT PLUGS