REBUILD REPAIR for 94 95 96 97 98 99 VW Golf Jetta Passat Cabrio Cluster for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $94.99

PLEASE NOTE: This is a ModuleMaster REBUILD SERVICE. You will need to remove YOUR cluster and ship it to us; we will rebuild it and ship it back to you.Please read the ENTIRE auction before purchasing!

1994 - 1999 VW Cabrio Golf Jetta Passat Cluster REBUILD!This rebuild applies to the following vehicles:

  • 1994 - 1999 VW Cabrio
  • 1994 - 1999 VW Golf
  • 1994 - 1999 VW Jetta
  • 1994 - 1999 VW Passat
  • Please VERIFY that your cluster is the same as the one in the auction photo (with or without MFI) before sending in for rebuild.

This rebuild should correct the following issues with YOUR VW Cluster:

  • Erratic or inaccurate speedometer
  • Erratic or inaccurate tachometer
  • Indefinite 'twitch' of speedometer or tachometer at the zero position
  • Dim cluster illumination

Please contact us through eBay if you have any other symptoms than described or general questions about this rebuild.

This rebuild service includes the following work performed on YOUR VW Cluster:

  • Restoration of speedometer
  • Restoration of tachometer
  • Replacement of faulty parts
  • Restoration of back-lighting
  • Power up before and after restoration
  • 2-5 business day turnaround
  • Five year guarantee against return failure - MUST send in face-plate!
  • We DO NOT charge a bench test fee.

REMOVAL INSTRUCTIONS:

Before removing your cluster; please read the following:

  • Obtain security code for anti-theft radio, if applicable.
  • Disconnect battery ground (GND) strap.
  • Be sure the ignition is switched to OFF (also applies when connection the battery)
    • Failure to do so may result in damage to the ECM (Engine Control Module)
  • Disconnecting the battery may cause the basic setting of the ECM to be erased
    • You may notice minor driving issues until the ECM relearns driver and engine characteristics over the course of a few days.

To remove your VW cluster; please use the photo diagrams provided to assist you:

  • REFER TO PHOTO DIAGRAM NUMBER ONE (1):
    • It is not necessary to remove the steering wheel when removing the cluster; the steering wheel has been deleted from the photo diagrams to allow for an unobstructed view of each removal step.
    • Carefully pry off left-side trim panel (left arrow), press release on side of light switch and remove light switch.
    • Carefully pry off right-side trim panel (right arrow).
    • Blank left and right-side trim panels may be replaced by additional switches or warning lamps, depending on equipment level.
    • On vehicles equipped with heated seats; the driver's heated seat regulation switch and passenger's heated seat regulation switch are usually located on the right side of the instrument cluster.
  • REFER TO PHOTO DIAGRAM NUMBER TWO (2):
    • Remove screws (arrows) and remove upper part of steering column trim. This will give you the room needed to remove the instrument cluster.
  • REFER TO PHOTO DIAGRAM NUMBER THREE (3):
    • Remove two screws (arrows) from instrument cluster.
    • Release instrument cluster trim side retainers by pulling firmly at top.
    • Remove instrument cluster trim.
  • REFER TO PHOTO DIAGRAM NUMBER FOUR (4):
    • Remove mounting screws (arrows) from instrument cluster.
    • Tilt instrument cluster downward.
    • Disconnect two multi-point connectors from back of cluster.
    • Remove instrument cluster.

Instructions on shipping YOUR VW Cluster to us:

  • PLEASE include the following when sending your cluster to us:
    • Year Make and Model of the vehicle that the cluster is out of.
    • Description of the issues you are having with your cluster.
    • Contact information or PayPal receipt with a phone number we can reach you at.
  • Wrap the cluster in bubble wrap inside a sturdy cardboard box so it doesn't move around.
  • Allow several inches of padded space between the cluster and inner walls of the box.
  • Cluster NOT packaged carefully can, and will, break while in transit.
  • DO NOT use large air pouches as they will deflate and become useless.
  • You are responsible for shipping your cluster to us.
  • The shipping that is included in the auction is for the return shipping back to you, we cover shipping on SOME auctions and the default is FedEx Ground/Home. If you would like your cluster shipped back faster, please select a different shipping option.
  • Once you purchase the auction please carefully pack and ship your cluster to us at:
ModuleMaster
2006 South Main St
Moscow, Idaho 83843
  • If you contact us with questions please keep in mind that our business hours are 8am - 4pm Pacific Time Monday through Friday and we are closed on the weekends and all major holidays (these are subject to change):
    • Memorial Day
    • July 4th
    • Labor Day
    • Thanksgiving (Thursday and Friday)
    • Christmas
    • New Years Day
  • Handling times are longer because this is a rebuild service; we have to wait for you to ship your cluster to us for rebuild. UPS Ground can take up to 10 business days to get to us.
If you have any questions, please contact us through eBay.


Parts Search:


Follow