This item has been shown 10710 times.
Click HERE for more information about this part.
You are offerding on a set of brand new Full Size SS HID conversion kit. This Kit is mannufacturered under strict quality control and the factory is ISO-9001 certified. The ballast and the burner in this kit have passed the most stringest OEM specific test by Toyota (Denso) of Japan, and they uses these ballast for the OE market in the Southern Americas region and some of the southern Asia countries.
- 100% water proof construction, you can submerge the entire kit under water and it will function correctly
- Integrated one piece Ballast, simplified wiring which eliminates any unnecessary confusion during install.
- More than 16+ bulb types, we will have the right bulb type for your vehicle
- 0.3% failure rate, compared to 5-10% failure rate of other HID Conversion kits currently out on the market, the reliability is comparable to that of OEM HIDs
- Color temperature output has tolerance of +/- 100K, the tolerance is unnoticeable by human eyes
- Superior lumen output compare to its competitor
- Best quality burners from Bosch Japan
- Choose from 5 different color temperature, you will indefinitely find the color out put of your choices
We have the following bulb type avaliable (Please dont forget to specify your bulb size and color temperature (K)when you make the payment)
H1, H3, H4(low), 9003(low) ,HB2(low) , H6(low), H6m(low), H7, H8, H9, H10, 9145, H11, H13(low), 9008 (Low), 880/881 (All 800 series), 9004(low), HB1(Low), 9005, HB3, 9006, HB4, 9007(low), HB5 (Low), D2S, D2R, D2C, 5202, H16 Pleasse note: when installing the kit with the (Low) beam only, you will loose your high beam , however, the adjustment in the capsule will compensate for the lost of the high beam, and it will be alot brighter than your halogen high beam and yet not blinding.
5202/H16 Now available
3000K Golden Yellow
3000K has an approximately 3200lm output, which is more than 3x the light output of the traditional halogen light. 3000K emits GOLDEN YELLOW color and offers superior penetration power during adverse weather epically in dense fog. The applications of the 3000K kit aim more towards secondary lighting apparatus such as high beam and fog lights. The 3000K capsule is actually a 5000K capsule specially coated with a film that filters out all the wave length except the range of wave length which emits yellow. This is the color temperature that will catch all the attention on the road.
5000K Pure White
5000K has an approximately 3200lm output, which is more than 3x the light output of the traditional halogen light and is the color temperature with the most output. The light appears fairly white, and has light yellowish hue when reflected off the road identical to the OEM HID equipped vehicles. This color is for customers who is looking for pure performance white improving the looks of their headlight. It is idea for customers who does alot of back road or canyon driving and need the optimal visibility. This is the color temperature that give you the most light for your bucks
6000K Diamond White
6000K has an approximately 2800lm output, which is 3x the light output of the traditional halogen light and slightly less light output compared to the 5000K. Although it has a bit lesser light output, it emits pure whiter light with very slight and barely noticeable tint of blue and purple
8000K Iceberg Blue
8000K has an approximately 2550lm output, which is about 3x the light output of the traditional halogen light and slightly less light output compared to the 6000K. While it has a bit lesser light output, it emits bluer light than the 6000K
10000K Brilliant Blue
10000K has an approximately 2200lm output, which is more than 2x the light output of the traditional halogen light.10000Kproduces a deep blue light output approaching violet and the blue isnoticeably deeper than the 8000K.
12000K Exotic Violet/Purple
12000K has an approximately 2100lm output, which is more than 2x the light output of the traditional halogen light. This color temperature puts out a deep bluish violet light and is deeper colored than the 10000K. It is for customer who is looking for the most extreme and most exotic looking light output.
30000K Pink Violet
This color temperature put ot a pinkish Violet, very attractive and seperates you from the rest of the cars. Despite the high color temperature, it still put out more than 2x the light than the halogen you are currently running in your car
New color very unique
Note: Color will vary when installed on different vehicle, due to the housing condition, geometry, size, and refector coating
2 x Full Size SS Ballasts
2 Xenon Bulbs
10 Zip ties
2 Heavy duty heat resistant double sided self-adhesive pads
- H1, H3, H4(low), 9003(low) ,HB2(low), H6m(low), H7, H8, H9, H10, 9145, H11, H13(low), 9008 (Low), 880/881 (All 800 series), 9004(low), HB1(Low), 9005, HB3, 9006, HB4, 9007(low), HB5 (Low), D2S, D2R, D2C, 5202, , H27, PSX24W,H16
- Power consumption: 35watts
- Voltage: 85V +/- 17V
- Luminous flux: 2800
- Service Life: up to 3000hrs
- Input Voltage: 9V-16V
- Working current (Steady state): 3.5 A nom
- Ignition voltage: 24kV Peak Max, 18kV Peak Min
- Lamp Frequency: 450 Hz
The ballast and the bulbs will come with two year warranty under normal use. Warranty will cover all normal defects, any physical damages will void the warranty
1). Payment should be made within 10 days of sale's closing
2). Domestic purchase will be shipped by USPS on most orders
3). International shipping, please click on the shipping tab
4). Payment method: Paypal
LOOKING FOR REPLACEMENT PARTS?
PLEASE CLICK ON THE LINK BELOW
Visit Our Other Listings for Complete kits (Click Here)!
Please Dont forget to specify the following information!!!
- COLOR TEMPERTURE:
- CONTACT PHONE NUMBER:
- SHIPPING ADDRESS:
If you dont know your bulb type, please refer to the following link
Q. Can't I just purchase a stronger watt halogen bulb to get a brighter light? A. XENON H.I.D. lamps are 35 watts while traditional halogen bulbs are 55 watts. Even though XENON H.I.D. lamps draw less wattage and current, they produce 3 times more light than its counter part, halogen bulbs. Lower wattage does not mean less light output, Xenon are much more efficient, in another word, more power is being put in to more functional use, similar to a smaller liter engine are capabile of producting more power than bigger engine with more liter because it is more efficient. Increasing the wattage will make the bulb a little brighter however it will create excess heat and it will damage your housing and harness. Also, AMPS = WATT(55watts in most cases)/ BATTERY VOLTAGE OUTPUT (12V). So as you increase the wattage on your bulb you increase the current draw on your entire electrical system. This is critical in motorcycle applications.
Q. Can I Install the kit myself? A. For anyone who is mechanically inclined, this installation is considered "do-it-yourself". While a typical installation takes approximately an hour and some application can even be installed in 20 min, it can vary depending on application (conversion or auxiliary). Our kits are ready to install right-out-of-the-box and come complete with everything that you will need. We also provide you a full set of easy-to-read, step-by-step instructions to guide you.
Q. What is the difference between genuine XENON HID lights and Xenon gas-filled bulbs? A. High Intensity Discharge (H.I.D.) is a type of lighting technology that replaces the filament of the light bulb with Xenon gas. The gas is ignited to produce an arc of light, when high voltage is applied. The amount of light output is three times that of a standard halogen bulb. The lamps also glow at a higher light temperature (closer to natural sunlight) that gives it its distinct color and appearance, and on the other hand, the Xenon gas filled bulbs are still traditional filamented bulbs, however they replace the halogen gas with xenon gas so it appears whiter and last abit longer when its operating at higher wattege .
Q. Could I re-install the original halogen bulbs after the XENON H.I.D. kit has been installed? A. With the growing popularity of leasing vehicles, a big concern is whether or not you can bring the vehicle back to its original factory condition. Our kits install with little or no modifications to your vehicle. If need be, the entire kit can be removed and the original halogen bulbs replaced. This kit can be re-installed into another vehicle that uses the same bulb size, therefore, the install is 100% reversable.
Q. What about the quality of your product? A. The are extensive technology being put in to the making of these ballasts and bulbs, thanks to the effort of many Hella engineers for the ballast and Philips engineers. These kits are trusted by OEM dealer and they installed these kit in their car and seller it for thousands more, and now you can get the same quality kit at fraction of that price.
Q. Why cann't replace the halogen bulb in my vehicle with XENON HID lamps with out having to purchase the entire kit? A. Motorcycles and automobiles currently use a 12 Volt electrical system for their headlamps. XENON HID lighting systems require over 20,000 volts to ignite the bulbs. Once lit, they only require 85 volts to keep running. Our kits include a power pack that is necessary for the lamps to turn on. The input of the power pack is 9-16 volts. It is an integral part of the system. You DO NOT require any additional components to install the xenon HID lamp into the original socket of the halogen bulb.
Q. What's the warrenty period for these HID kits? A. The ballasts and bulbs come with 24 months warranty from all factory defects. If any component fails within warranty period, we will replace the defective component immediately. Contact us with a description of the problem and we will be happy to assist.
Similar 1/4 mile timeslips to browse:
1988 Chrysler LeBaron : 8.348 @ 164.870
Ray Galie, Engine: 572 Mopar, Tires: Hoosier
1989 Chrysler LeBaron : 8.450 @ 159.000
Destry St.Pierre, Engine: 528, Tires: 32x16
1988 Chrysler LeBaron : 8.610 @ 158.110
Ray Galie, Engine: 572 MOPAR,
1986 Mitsubishi Starion ESi: 9.610 @ 132.000
Ariel, Engine: G54B, Turbos: T70
1989 Chrysler Conquest TSi: 10.440 @ 128.860
Rob, Engine: G54B, Turbos: T4 Vtrim
1987 Chrysler Conquest TSi: 11.240 @ 120.000
Phil of da Funk, Engine: G54B, Turbos: PTE 6062 Tires: MT
1989 Chrysler LeBaron GTC Coupe: 11.872 @ 120.210
Steve Menegon, Engine: 2.2, Turbos: T3/T4 Hybrid Tires: 24.5 x 8.5 x 15
1988 Chrysler Conquest TSi: 11.940 @ 115.000
Lower Shores Performance, Engine: G54B, Turbos: 19C
1987 Mitsubishi Starion r: 12.180 @ 118.967
george torres, Engine: 2.6 turbo, Turbos: upgrade 16 Tires: 205/50/16
1987 Renault 18 GTX: 12.344 @ 116.000
Andres Osorio, Engine: 2000cc, Turbos: GT30R Tires: SLICKS MT
1989 Chrysler Conquest TSi: 12.720 @ 114.000
Greg, Engine: G54B 2614cc Inline-4, Turbos: TD05/6H-20G-1A - ported Tires: 245/45-16 BFG ZR4
1989 Chrysler Conquest TSI SHP: 13.700 @ 106.000
JAMES BAUM, Turbos: 19C Tires: BFG DRAG RADIALS
88 Chrysler Conquest tsi: 13.790 @ 99.770
bill b, Engine: 2.6, Supercharger: t3/t4
1989 Chrysler Conquest TSi: 14.400 @ 96.600
A. Davis, Engine: 2.6 liter, Turbos: 12a mitsu
1987 Mitsubishi Starion : 15.520 @ 92.700
Brian Pajer, Engine: 2.6 turbo, Turbos: stock turbo
1983 Mitsubishi Starion JB: 15.750 @ 87.400
Ivailo, Engine: 2.0 4G63T 8V, Turbos: Stock Mitsubishi TC06 11A
1989 Chrysler LeBaron gt convertible: 15.900 @ 92.000
Joe, Engine: 2.5, Turbos: yes Tires: 15 pirelli's
1993 Chrysler LeBaron LE: 16.540 @ 85.620
Chris Wolfe, Engine: V6 3.0 liter,
1990 Chrysler LeBaron Highline Convertible: 17.203 @ 79.730